Sublimate a Dollar Tree Glass Cutting Board (no paper cleanup required)

Подписаться 33 тыс.

Просмотров 153 тыс.

50% 1

I did a video recently where I sublimated a couple of cute gnomes on a glass cutting board from the Dollar Tree. It turned out super cute, but I had to clean a lot of paper off the back of the cutting board that was stuck to the vinyl. In this video, I tried a new brand of sublimation paper and it peeled right off the cutting board without any cleanup necessary. I had seen other people on RU-vid use it and couldn't believe the difference, so I just had to try it. Boy am I glad I did! A viewer helped me find this image later and I have since purchased it but as of August 2022 that Etsy Shop no longer exists. If you google "blue flower faith" and look at images, you will find the design. Also, I found it in another Etsy Shop today. www.etsy.com/listing/11492396...
Products used (thank you for using my affiliate links):
Cosmos Sublimation Ink www.shareasale.com/r.cfm?b=13...
Squeegee www.amazon.com/gp/product/B00...
TexPrint R Sublimation Paper amzn.to/3QKuofu
Rapid Tac Application Fluid (various sizes available) www.amazon.com/gp/product/B00...
Oracal White 651 Vinyl (I used matte) www.amazon.com/gp/product/B01...
Cricut Maker www.amazon.com/gp/product/B07...
Heat Press (5 in 1 - 15" x 15") www.amazon.com/gp/product/B08...

Хобби

Опубликовано:

12 мар 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 442

@waterlilly62lori 2 года назад

Thank you for your video and getting to the point. I hate it when people talk and talk.

@MakingwithMarilyn 2 года назад

Thank you so much!!! I am glad you found it helpful.

@PittsburghArtistStudio 3 месяца назад

Me too!

@gerrywolfe2549 3 года назад

WOW, thank you for the great video. I’m just getting into sublimation, so something new to try. This is the first time I’ve seen using vinyl. Need to give a try.

@MakingwithMarilyn 3 года назад

Get ready to be addicted!!! It's so much fun:) Good luck with all of your new projects. I just ordered some new things from Amazon to try.

@staceycollins5325 Год назад

Good morning Marilyn! I ran across this video while trying to decide what to make for gifts. I think this is it! Quick, easy and cost effective. Thank you for the awesome video.

@MakingwithMarilyn Год назад

Thanks for watching Stacey!!! Yes, these are so much fun and I love that you can customize them any way you want.

@catdeeann 3 года назад

Thank you for this video! So clever and it’s easy to follow.

@MakingwithMarilyn 3 года назад

Thanks so much!!

@MariaRocha-mv3pm 2 года назад

Thank you for explaining everything so well! I have watched several videos on this subject and no one ever explained it as well as you. Thank you!

@MakingwithMarilyn 2 года назад

You're very welcome. Thanks so much for taking time to watch and comment!

@sarah28681 2 года назад

I agree. She explained so well. I watched 3 videos this morning and was thinking I would not be trying it. but now I feel like going to the dollar tree and grabbing some cutting boards.

@MakingwithMarilyn 2 года назад

@@sarah28681 go for it! These are so fun and inexpensive to make.

@mirandakober5922 Год назад

So smart with the magnets on your heat press for the paper!! I am going to do that!

@MakingwithMarilyn Год назад

Thank you so much!!!

@Itsjustash04 2 года назад

Wow! My mind is blown! I never knew you could use vinyl to sublimate like that! Also, that is THE best transfer paper! I have a massive roll of it because I refuse to use anything else.

@MakingwithMarilyn 2 года назад

Yes, it is a fun way to make a unique and inexpensive cutting board or trivet! I don't know if all vinyls will work, but the oracal 651 does so I just stick with that. Thanks so much for watching and commenting!!!

@mommylove67 Год назад

I came across your video and loved your tutorial method. Just a joy to learn from your video. Thank you

@MakingwithMarilyn Год назад

Thank you so much Anisa!!! I appreciate it.

@koakes82 2 года назад

Thank you so much for sharing! That was amazing and turned out beautifully.

@MakingwithMarilyn 2 года назад

Thanks so much! Thank you for taking the time to watch and comment!!

@survivingtheslomskis1876 2 года назад

Girl you are amazing! I have been wondering what I have been doing wrong with my plate sublimation. Thanks to you and this video, I figured it out. Amazing! thank you so much for taking the time to make this video!

@MakingwithMarilyn 2 года назад

You are very welcome! Thank you for taking the time to leave such a positive comment! I really appreciate it🙂

@RainorShine1 2 года назад

what was you doing wrong?

@survivingtheslomskis1876 2 года назад

@@RainorShine1 I was not rotating my plates

@sharonlatour6230 2 года назад

Marilyn, this turned out beautifully!

@MakingwithMarilyn 2 года назад

Thank you!!!

@cocoad.9378 Год назад

That is absolutely beautiful.

@MakingwithMarilyn Год назад

Thank you so much!!!

@jessicamartin3585 2 года назад

Thank you for making such a detailed video.

@MakingwithMarilyn 2 года назад

Thank you so much!!!

@sabrinabradley5010 3 года назад

Thank You do much! Love your process and delivery! Awesome teaching voice! Thank you for sharing Ms. Marilyn!

@MakingwithMarilyn 3 года назад

You're very welcome!!! Thank you for your wonderful comment!

@elainenagel 3 года назад

I have watched so many videos Sublimating on DT Cutting Boards. Thank You, it was so spot on and concise and yes your voice is perfect for videos

@MakingwithMarilyn 3 года назад

Thank you soooo much for your feedback!!! I tend to cringe when I hear my voice, so I am glad it is not annoying to others:)

@idejoseph 2 года назад

Beautiful! Your tutorial is perfect! I just made a couple and wanted to tell you that I did 1 with Oracal 651 and the other with just some cheapie vinyl from a bundle I bought from Amazon. They both worked perfect! And fyi...if you screw up after pressing...(I did 4 x 90 minutes!) The vinyl comes off very easily and very cleanly. It was about an hour later, so it was completely cooled. Thanks again!

@MakingwithMarilyn 2 года назад

I am sorry my reply is so late. I thought I had replied to your message but apparently I failed to get it out. I really appreciate you letting us know that the non-Oracal vinyl worked well! I appreciate it.

@eclecticheiress9437 2 года назад

absolutely stunning!! this is such a great idea. thank you

@MakingwithMarilyn 2 года назад

I wish I could take credit for the idea, but I saw the process on another channel:) But hopefully the video is helpful and thank you so much for watching and taking the time to comment!!!

@eclecticheiress9437 2 года назад

@@MakingwithMarilyn roger that and much respect for giving credit where it is due.. however, your teaching method and style are unique! thank you for sharing what you've learned.

@conniehard9145 2 года назад

Thanks for explaining this in detail. It came out Great

@MakingwithMarilyn 2 года назад

Thank you Connie🙂

@leighdurham3004 8 месяцев назад

I ❤ your tutorials! So easy to understand!

@MakingwithMarilyn 8 месяцев назад

Thank you so much!

@antoinettecrutchfield-brac3666 2 года назад

You have a relaxing voice. I listened to your video even though it was not what I was looking for. :)

@MakingwithMarilyn 2 года назад

Thank you for such a nice comment! So sweet:)

@bevyjeanheyrman8537 6 месяцев назад

It’s beautiful

@empressiveappeal Год назад

Great video...not too much talking and easy to follow. I saw a guy wet hit first before he pulled it off. I've had these cutting boards for years and was trying to figure out to utilize them.

@MakingwithMarilyn Год назад

Thanks so much! If I use other paper, I have to wet them down also. They are fun to make and I love that you can customize them.

@nacloutier14 2 года назад

Thank you for the video. At first I thought the vinyl was melting and sublimation print was not coming through but all worked out with more time…

@MakingwithMarilyn 2 года назад

That is great!!! These are so fun and inexpensive to make!

@nacloutier14 2 года назад

@@MakingwithMarilyn yes they are!

@jinagomez546 2 года назад

Wow can't wait to try this tomorrow!

@MakingwithMarilyn 2 года назад

Yes, other than getting the vinyl on without bubbles, it is a super fun and easy project. If you have issues with your vinyl, I have heard of people just spraying a little water on and then squeezing it out. Let me know how it goes.

@saimascakeparlour 2 года назад

This is so awesome 😍😍😍😍 Thank you for sharing ❤️❤️

@MakingwithMarilyn 2 года назад

You’re welcome! Thank you so much!!!

@carolbersch9753 5 месяцев назад

I watched your prior video yesterday and watched this video today. I have to say Marilyn you have the most soothing and comfortable voice ever. I really appreciate you didn't bring your dog/cat on the video for 5 minutes. This is exactly the video I was needing since I bought 4 cases (yes, cases) of the DT square cutting boards. You rock!!! (although now I'm concerned about the pictures fading and the toxic chemicals that can come through.) A problem for another day. Thanks, again you're amazing!!!

@MakingwithMarilyn 5 месяцев назад

Thank you so much, Carol, for your inspiring comment!! I appreciate it very much.

@tywannaluckey7086 2 года назад

Beautiful!

@MakingwithMarilyn 2 года назад

Thank you very much!!!

@pamtilsonrodgers2825 3 года назад

What a neat idea!

@MakingwithMarilyn 3 года назад

I wish I could take credit for thinking of it:) I saw someone on RU-vid use this process, so I decided to try it myself. This is the second video I have done using the process and I love how it turned out. Thanks so much for watching and commenting!

@georgiastewart4479 Год назад

It's gorgeous!

@MakingwithMarilyn Год назад

Thank you so much!

@tamijohnson9870 2 года назад

All I can say is WOW!!!!

@MakingwithMarilyn 2 года назад

Thank you Tami!!!

@inappropriatesvgs 2 года назад

Great video! You’re obviously a very smart lady… liked and subscribed! 😍😍

@MakingwithMarilyn 2 года назад

Thank you so much Tilly!!! What crafting hobbies are your favorites?

@smilingatuall 2 года назад

1. This was a phenomenal video 2. You are a phenomenal instructor 3. The fact that you have replied to every comment on this video speaks volumes. Definitely subscribing to your channel! Thanks for being you!!

@MakingwithMarilyn 2 года назад

Thank you so so much Alisha!!! Such a wonderful comment to read!

@Esha911 2 года назад

Great video. I’ll try this tomorrow.

@MakingwithMarilyn 2 года назад

Thank you!!! Good luck with yours!

@sweetlyevil187 Год назад

Amazing!

@MakingwithMarilyn Год назад

Thank you!!!

@reneebanbury7066 Год назад

Great tutorial! Quick & easy! Amazing & beautiful! Thank you!

@MakingwithMarilyn Год назад

Thank you so much!!!

@tammylogan6989 2 года назад

Awesome video

@MakingwithMarilyn 2 года назад

Thank you so much!!!

@justcraftingaround7467 2 года назад

Thank you for sharing

@MakingwithMarilyn 2 года назад

Thanks so much for watching!

@sheronwalker7882 2 года назад

Very pretty

@MakingwithMarilyn 2 года назад

Thanks so much!!!

@ufoquilter86 Год назад

OMG I have to try this! Thank you ever so much for the video

@MakingwithMarilyn Год назад

Thanks so much for watching! These are so much fun and I love that you can personalize them for special events. It is just a hack so doesn't last forever the way a "real" sublimation blank does but they are really fun to make.

@jessiegibson9023 Год назад

Good video thanks looks good ❤

@MakingwithMarilyn Год назад

Thanks Jessie!

@tywannaluckey7086 Год назад

Beautiful😊

@MakingwithMarilyn Год назад

Thank you!!!

@cherylbrown6746 2 года назад

Thank you so much!

@MakingwithMarilyn 2 года назад

You are very welcome! Thank you for watching Cheryl!!!

@naturalcurls4life576 2 года назад

That is so pretty, tfs.

@MakingwithMarilyn 2 года назад

Thank you so much!

@gatita1974 Год назад

That was so cool!

@MakingwithMarilyn Год назад

Thank you so much!!!

@ANDTOTOPITOFF Год назад

Thank you!

@MakingwithMarilyn Год назад

You're very welcome! Thanks for watching.

@dontworrybehappy8493 Год назад

I watched the man who suggested the Rapid Tac, have to lay his glass cutting board in the sink and work like crazy to scrub off his paper. Thanks for your paper suggestion.

@MakingwithMarilyn Год назад

That's what I had to do on my first cutting board so was happy to see a video recommending this paper as well:)

@marjoriecramer9102 3 года назад

beautiful

@MakingwithMarilyn 3 года назад

Thank you!!!

@agrinke7371 2 года назад

Thank you!!!!

@MakingwithMarilyn 2 года назад

You're very welcome! Thanks for watching and commenting.

@evelynagbasonu3096 2 года назад

Amazing video

@MakingwithMarilyn 2 года назад

Thank you very much Eve!!!

@urjnlegend 2 года назад

ThankS for the video MWM

@MakingwithMarilyn 2 года назад

Thank you so much!!!

@audreycooper2960 2 года назад

awesome.

@MakingwithMarilyn 2 года назад

Thank you!

@shannonebryan5475 2 года назад

Love !!

@MakingwithMarilyn 2 года назад

Thank you Shannon!!!

@elainedaniels6541 2 года назад

Goo gone works great.

@MakingwithMarilyn 2 года назад

Thanks for the great tip!

@elainedaniels1081 Год назад

A little dish soap and water works great.

@MakingwithMarilyn Год назад

Thank you for the suggestion🙂

@reginabagala7121 Год назад

I also saw someone use windex and it also worked well. FYI

@MakingwithMarilyn Год назад

Thank you for letting us know Regina!

@cindyswain8094 11 месяцев назад

I appreciate your videos and they have helped me so much, especially the sublimation on the glass cutting boards. I follow your process and it works very well. I have noticed that over time, a few of my trivets are getting fuzzy (for lack of a better word). They used to be crisp and clear and now they are a little muddy over time. Wondering if you have any input about what I could be doing wrong. Thanks in advance.

@MakingwithMarilyn 11 месяцев назад

I think it is a result of the hack. I believe the ink migrates a bit in the vinyl over time. For a hack, I think it is a great project, but I would not sell these due to that issue. If it gets to where you do not want to use it, you can soak it for a long time and get the vinyl off to make another one.

@cindyswain8094 11 месяцев назад

@@MakingwithMarilyn thanks for your reply. Wondering if you’ve ever used transparent vinyl and if they do the same thing over time?

@rachelpettit5438 3 года назад

Thank you for the video! What a great image & it came out beautifully. Just to clarify for myself, you put the vinyl sticky side down on the smooth side of the cutting board. Then you press the image on what would have been the "front" of the vinyl. The image will show through the vinyl to the top of the glass?

@MakingwithMarilyn 3 года назад

Yes that is correct. Thanks so much for watching!!!

@rachelpettit5438 3 года назад

@@MakingwithMarilyn thank you for sharing your knowledge w/us!!

@pjcash1167 Год назад

I loved your video. It is so clear to understand. I couldn’t wait to get to Dollar Tree. Our Dollar Tree doesn’t have the trivets. Could I ask where you got your design or did you make it? Thank you.

@MakingwithMarilyn Год назад

Thank you very much! I got the design off of Etsy. Search ETSY for Faith PNG Sublimation and I believe you will find it. It looks like it is a different seller, but the person I bought it from on Etsy no longer has it listed.

@shannonhicks1616 Год назад

Hello! This is so pretty! However, I was told that you should not heat up 651 vinyl. It has cancer causing chemicals, when you heat it up, they leach out. I was told a better way was to use a clear heat transfer vinyl. Because it’s for heating, it will not put those chemicals in the air. Just FYI. No disrespect, it is so pretty!

@MakingwithMarilyn Год назад

Thank you Shannon! Good to know about using the heat transfer vinyl instead. I am going to try that very soon to be on the safe side and appreciate you reaching out like you did!

@blueskyjax 2 года назад

Thank you this is great! Just to confirm from bottom to top it is sublimation paper, vinyl and then glass? So the top platen is pressing against the glass and not the sub paper? thank you!

@MakingwithMarilyn 2 года назад

Yes, that is correct. Since the sublimation print is on the bottom and you are heating from the top, it takes a lot more time than a typical sublimation project.

@Paraburzoo 2 года назад

Absolutely Brilliant! I love this. Does the vinyl have to be that particular brand? I’m in Australia and don’t think it’s available here.

@MakingwithMarilyn 2 года назад

Thank you so much for watching! Unfortunately, I have only tried that brand so am not sure what all brands it works with. Sorry I can't be more helpful.

@azcanuck764 Год назад

Hi Marilyn, great tutorial! I hope I'm not being redundant with my question since I didn't read all the comments. I use dye-sub cutting boards & they are super durable but quite expensive, so I would like to try the vinyl method you showed. My question is, are these boards dishwasher safe, or does the vinyl come off?

@MakingwithMarilyn Год назад

I have never put mine in the dishwasher. I just wash the top with a soapy rag and rinse it off under the faucet. I don’t think they would do too well going through the dishwasher in the long run.

@azcanuck764 Год назад

@@MakingwithMarilyn That was quick!! LOL Thanks for the reply. When I do the dye-sub boards, I know that the dishwasher is ok, but I was concerned about the vinyl.

@RainorShine1 2 года назад

so scared to do this haha but I want to so bad haha

@MakingwithMarilyn 2 года назад

You can do it Marie:) If it turns out badly, you can soak the glass cutting board in water and peel the vinyl off and try again. It is fun to customize these for special occasions.

@larryjoseph1170 2 года назад

Good, informative video. I just want to add that normally with sublimation printing you would reverse/mirror the image before printing but with this method/item you do not reverse/mirror it....not sure if you mentioned that. Great job.

@MakingwithMarilyn 2 года назад

Thank you! I am not sure if I did but even if I did, repetition is a good thing when learning new concepts:) Thanks for watching!

@redlibra2096 2 года назад

Great video! Where did you got your mats for yout heat press?

@MakingwithMarilyn 2 года назад

They actually came with my press. Here is one that appears to be similar though a different color. There are a few different ones on Amazon in varying sizes. Thank you for watching!!! www.amazon.com/gp/product/B08ZYHDSDB/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B08ZYHDSDB&linkCode=as2&tag=makingwith022-20&linkId=532fc21ee23b63b36c91f63b8d0e7331

@Kati_k_kuriosz Год назад

Thank you for sharing. Do you need something to make it waterproof or hand washing only?

@MakingwithMarilyn Год назад

I wash mine with a soapy dish rag and then rinse it off under the faucet. I haven't done anything to it other than shown in the video. Thanks for watching!!!

@masoncreationsetc 2 года назад

Beautiful. Can this be done without a heat press? Are you able to use the cricut hand held heat press for iron on vinyl?

@MakingwithMarilyn 2 года назад

You can use the Cricut easy press for iron on vinyl. I think you would need the easy press 2 or later for sublimation due to the heat required. It might be difficult to keep even pressure against the cutting board for long enough to do this process, but might be worth a try. If you do try it, let me know how it comes out. Thanks for watching!!!

@masoncreationsetc 2 года назад

@@MakingwithMarilyn thanks Marilyn

@LHA100 2 года назад

Thank you so much for sharing! Is it washable?

@MakingwithMarilyn 2 года назад

I just run mine under the faucet and use a soapy washcloth to clean it off. I would not put it in the dishwasher or soak it for very long.

@TJ-yk8tq 2 года назад

great video! I saw others like this but they didn't explain them well like you did. Can you use any permanent vinyl to sublimate on?

@MakingwithMarilyn 2 года назад

Thank you so much!!! I am sorry I don't know what other brands might work as I have only used this one. If you try it, please let me know the brand and if it worked well.

@cassyhedges1969 2 года назад

Thank you so much!! Ive been making these but you have shown me some new tips!! . I'm worried about the pencil line around the image--do you know what happens if your pencil mark gets "subbed" in error ? what happens ? would you see a pencil mark... ? or does it not seep through the vinyl

@MakingwithMarilyn 2 года назад

I make sure to keep the pencil mark outside what will actually touch the glass because I had concerns about that as well:) Thanks so much for watching and taking the time to comment!

@JL-il6vk 2 года назад

If the pencil line gets in the glass it becomes part of the design.

@cassyhedges1969 2 года назад

@@JL-il6vk thank you so much

@cherylauditor4286 Год назад

great demo ! I wonder if you can "wash" the glass after you added the vinyl and sublimation print ?

@MakingwithMarilyn Год назад

I use a soapy dish rag and wipe off anything on it, and then rinse it under the faucet. I don't think it would fare too well in the dishwasher but have never tried it. Thanks so much for watching!!!

@awade8201 3 года назад

Where did you get that wonderful large squeegee? It is perfect for projects like this. I haven't been able to find anything like it.

@MakingwithMarilyn 3 года назад

Here is a link to it. I got it off of Amazon. It really is nice for projects like this. Thank you for watching!!! www.amazon.com/gp/product/B0027A5K9C/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B0027A5K9C&linkCode=as2&tag=makingwith022-20&linkId=a934ce7decfb60ab1eb31c4b40fe293b

@rverk47 3 года назад

great video, do you have to use sub paper?

@MakingwithMarilyn 3 года назад

Some people sublimate with regular printer paper, but I prefer to use sublimation paper. I get better colors with it. I assume regular paper might stick a bit more as well. You do have to use sublimation ink, though.

@ShanikeWoodward Год назад

Hi, I love your video. Just one quick question what size did you make the image?

@MakingwithMarilyn Год назад

I'm not sure the exact size, but I made a circle a little larger than the size of the cutting board, and then just made the image a size that I thought would look good in it.

@Zumbamom Год назад

Did you mirror the image on this? :) I did one today using laminate sheets. Great video

@MakingwithMarilyn Год назад

No, since I put the vinyl on the bottom and the image is coming up through it from the bottom, you do not mirror it. Thanks for watching!!!

@deenawillis1597 Год назад

Thanks so much for sharing. Do you have to mirror your sublimation image?

@MakingwithMarilyn Год назад

Thank you! Since you are putting the image on the bottom and it is coming up through the vinyl, you do not mirror it.

@denisecworley 2 года назад

Hi!! I tried your method and one turned out great and then the other after putting the vinyl on with the tack you mentioned it was perfect no bubbles then I put it in the heat press for 15 sec like you did and it came with some bubbles. And some where big and caused the vinyl to crease. Can you remove the vinyl anyway or heat the image off?

@MakingwithMarilyn 2 года назад

Oh no! I am sorry that happened. Heat will cause any little bubbles to expend. If you soak your cutting board in water for awhile, you can pull it off. It’s not real easy to do but I have definitely done that.

@redgeminipa 2 года назад

Did you press it with vinyl side down? Permanent vinyl can't take direct heat.

@jackiewoolard4359 Год назад

Marilyn....I was wondering what your thoughts are on trying to use the DTF film and powder and putting in on a glass cutting board from dollar tree??

@MakingwithMarilyn Год назад

If you want it for decoration only, it might work to put it on the back (smooth) side since once the adhesive powder cures, it is pretty clear. Even for just decoration, I feel like it would not stick well to the pebbly textured top. If you try it, I would love to hear about your results!

@teresaeaton5156 2 года назад

Thank you so much for this! I have already made several. Someone mentioned doing this on FB and said that the image faded after several months, have you noticed that at all?

@MakingwithMarilyn 2 года назад

Someone asked me about that awhile back so I got it out and looked at it. It's possible that it has faded a little, but nothing really noticeable. I assume if you use it as a heating block, it would fade from the heat. I don't sell mine and I often pull the vinyl off (after letting it soak in water a few hours and it's still tough to get off) after a few months to put a new design on, so it would not bother me if it were to fade given the inexpensiveness of it.

@teresaeaton5156 2 года назад

@@MakingwithMarilyn Thanks for your reply! :)

@sarah28681 2 года назад

Hi! I just happened upon your video and this is so cool! I am just getting into sublimation and this would be a great cheap product to try out. Thank you so much for showing how to do it an easier way as I have seen other videos and they weren't this easy. Could I ask what the tile you have by your heat press is for and how does it help? Im off to watch more of your video. btw where did you find that lovely design you used?

@MakingwithMarilyn 2 года назад

Thanks for watching and taking the time to comment!!!

@MakingwithMarilyn 2 года назад

I realized I didn't answer your questions as I was going back through this evening. I have the design linked in the video description. I got it from Etsy and absolutely love it. I use the tile to sit hot things onto sometimes and other times I use it to pull heat from things. For example, when you have a cold peel vinyl, you can put the tile on it after you press, and it helps cool down your vinyl more quickly. Thank you!

@kimkowalkoski8257 2 года назад

Thank you for the video. You mention that the vinyl is HTV but the Amazon link says Permanent Matte, (I am still new to sublimation and vinyl) is HTV the same as Permanent Matte ?

@MakingwithMarilyn 2 года назад

Thanks so much for letting me know that I said HTV in the video. It is definitely adhesive vinyl and not HTV. I watched back through the first half of the video and I say the right type of vinyl there. Do you remember generally where I called it HTV? I want to add words to correct the mistake so that it doesn't confuse people. Thanks again!

@MileyonDisney Год назад

Very helpful video. I'm anxious to get all the supplies I need to try it, myself. You said you used TexPrint R paper, but the link you included is for TexPrint DTr Heavy paper. Which one should it be?

@MakingwithMarilyn Год назад

Interesting. The paper I bought was TexPrint R but the link now goes to another paper even though it used to go to the TexPrint R paper. Amazon must have changed something. Thank so much!

@MileyonDisney Год назад

@@MakingwithMarilyn Thank you. I just wanted to be sure to get the right thing. Great videos!

@kimquintero6261 2 года назад

I can't find if you mention what kind of printer you use to print your image. I have converted an Epson ET2720 to a sublimation printer. Would that work with the TexPrint R paper?

@MakingwithMarilyn 2 года назад

I used an Epson 2760 that I converted to sublimation. Yes, your printer will work with the TexPrint R paper. TexPrint has a couple different papers, and someone else told me that the other one (the one I did not use) sticks to the vinyl. So, be sure to purchase the paper used in the video if you decide to get some and let it cool down some before you pull the paper off. Otherwise, it will stretch your hot vinyl. Thanks for watching!!!

@ketiaperkinsformallydavis6337 3 года назад

Do you think using the infusible ink pens on the paper would work with this? This turned out beautiful. Thank yiu

@MakingwithMarilyn 3 года назад

I think it should but I honestly don't know. If I owned any of the Infusible Ink pens, I would try it out for you, but I don't. Maybe someone reading this comment has tried the infusible ink pens and can provide an answer - hopefully:) So sorry I couldn't be any more help.

@ketiaperkinsformallydavis6337 3 года назад

@@MakingwithMarilyn thank you for responding♥️

@MakingwithMarilyn 3 года назад

@@ketiaperkinsformallydavis6337 You're so welcome! If you try the Infusible Ink pens, let me know if it works. I had a cutting board project that I was not happy with. I soaked it in water and then pulled the vinyl off. It wasn't really easy to do, but it at least saved my dollar cutting board:)

@ludirdz78 2 года назад

Did u place the vinyl facing down on to the sublimation? Or is vinyl side facing up

@MakingwithMarilyn 2 года назад

The vinyl was added to the glass cutting board first. Then I placed the sublimation print under and against the vinyl. The vinyl is on the bottom of the glass cutting board, so facing down. Let me know if this did not answer your question and thank you for watching!

@tammygriffin4122 2 года назад

Ok great video question.. i didn't mirror my image so why did my image show up backwards? The writing is backwards what did I do wrong? Other than that it turned out beautifully tk u for your time

@MakingwithMarilyn 2 года назад

Did you put your vinyl and image on the bottom side of the cutting board but image facing up?

@Pherine1 2 года назад

Do you think if I used the vinyl on a ceramic tile and then placed my print face down on the vinyl it would work the same?

@MakingwithMarilyn 2 года назад

I am not sure, but what I have done and have seen others do is to add lamination film to ceramic tiles and then sublimate onto that. I have only done this on white tiles, though. Some people use the 3M lamination pouches and pull them apart. I prefer this really thin laminating film. amzn.to/37bHNf0 If you end up trying the vinyl, I would love to hear if it works for you:)

@bevyjeanheyrman8537 6 месяцев назад

Replay-thanks . New to your site

@MakingwithMarilyn 6 месяцев назад

Thank you so much, and welcome to my channel!!!

@jilliankitts4915 2 года назад

Ok- two questions- should I mirror my image before I print it off onto my sub paper? And two- if I don’t have the spray tack- will this project still be doable? Can I just use water and a little dish soap like you suggested? If yes- what water to soap ratio?

@MakingwithMarilyn 2 года назад

No, you do not mirror your image. I know that seems odd because we are trained to always mirror our images:) I have seen that water with a tiny bit of soap works but have not tried it. I just watched a video that said a few drops of dawn liquid in a cup of water but I bet there are a lot of videos that discuss their ratios. I started making these without applying wet, which is doable, but you will likely end up with more air bubbles. I hope yours turns out well! Just try to get all water and all air out because when you heat it up, any air/water trapped in there will expand.

@redgeminipa 2 года назад

Just soak in plain water. If it doesn't start lifting easy, give it more time to soak. No soap needed. Also, use a mild scrubby under running water to clean off the milky residue leftover from the sub paper.

@valeriehofmann2615 3 года назад

Hopefully these cutting boards are safe to heat. And not causing stress and cracking to happen at a later date.

@MakingwithMarilyn 3 года назад

I haven't had any problems with any that I have done. If eventually one that cracks, the vinyl will keep it from falling all apart and being dangerous and I have very little money in it. However, if you aren't comfortable, they do make actual sublimation cutting boards that you can buy from companies like Conde (DyeTrans), etc. that you could use. Always a good idea to be cautious.

@crystallee9295 3 года назад

Where did you find the image? I love it.

@MakingwithMarilyn 3 года назад

I found it on Pinterest. I can't find the original source of it. If you do, let me know:) For now, here is a link to it on Pinterest. www.pinterest.com/pin/340444053088999535/

@rebajackson1077 Год назад

Lovely. I have some f those plates. But I was taught to use vinyl (reversed and put on bottom) Im going to try this method. Vedio was slow enough and instructions was simple and plain where I could actually listen and understand them. Thanks

@MakingwithMarilyn Год назад

Thank you! I have made the vinyl ones also and they are fun as well:)

@TheCreativeChica Год назад

Love this image and the word Faith! Can you tell me where to get the image and what font is the word faith? I don't have a way to sublimate, but have another idea for making a wall hanging.

@MakingwithMarilyn Год назад

I bought the entire design (flower and word) off Etsy, but I checked my link to it and the store is no longer on Etsy. Originally, I found the image online by googling images. When a viewer saw it, she let me know where to get the file, so I bought it. You might be able to find the image on google. (added later - I just did a google search for "blue flower and faith" and found it.

@TheCreativeChica Год назад

@@MakingwithMarilyn Thank you very much! I will search it.

@MakingwithMarilyn Год назад

I found the image in another Etsy Shop www.etsy.com/listing/1149239693/faith-png-sublimation?ref=cart

@ONEtreasures 2 года назад

Will this work on ceramic tile, or do you recommend another method

@MakingwithMarilyn 2 года назад

You can definitely sublimate on a ceramic tile, but you would need some type of coating for the sublimation to "take". Some people use clear laminate film on them and others apply a couple coats of polycrylic. The polycrylic method takes longer and your paper will likely stick to it, so would need to be rinsed off. I remember seeing a small RU-vid channel named "The Oily Crafter" sublimate on tile, if you want to search for their videos. Of course, you would not use them to cut on since the image would be on the front instead of coming through from the backside. Thanks for watching!!!

@ChaoticBliss23 Год назад

My board is more like 8" so should I make the vinyl round 8" and then the sub a tad bigger or still do the vinyl round at 7.75 and the sub a tad bigger? I'm still pretty new to sublimation. But now I know why people want the bigger print printers. lol

@MakingwithMarilyn Год назад

I would make the vinyl just slightly smaller than the board so it doesn’t accidentally show a bit from the back. And then I would make the print slightly larger than that so it goes just beyond the vinyl.

@ChaoticBliss23 Год назад

@@MakingwithMarilyn Thank you so much!!! I'm so glad I found this channel. :)

@karenreese2568 2 года назад

great video! at 10:38 what kind of paper did you say that was?

@MakingwithMarilyn 2 года назад

Here's a link to it. It's a sublimation paper by TexPrint and it's a specific paper of theirs. www.amazon.com/gp/product/B00UZQP5I6/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00UZQP5I6&linkCode=as2&tag=makingwith022-20&linkId=e6e17cedeb2d7498b8674d6f43035122

@bernadettegaines1675 2 года назад

Great video! Could you place this in a dishwasher?

@MakingwithMarilyn 2 года назад

I have not tried to, but I don't think it would fare too well. I just wipe the top of mine off with a damp rag. Thank you for watching!!!

@philomenakline5056 3 года назад

How do you wash this? Does the oracal hold up and stay on??

@MakingwithMarilyn 3 года назад

I use a dishrag and wash off the top of the cutting board with soapy water. Then rinse it under the faucet and dry it. I would not let it soak or sit in water though. The only time I soaked one of these was when I wanted to take the vinyl off and reuse the cutting board. It was still very tough to get the vinyl off, but I was able to peel it off after letting the cutting board soak for a long time.

@stepheniem627 2 года назад

Do you need a heat press? Or will iron work?

@MakingwithMarilyn 2 года назад

I don't know that an iron would work with this project, mostly because you could not get solid pressure against the entire surface consistently. If you try it and it works, please let me know.

@matheis66 6 месяцев назад

I had bought a different spray adhesive that was repositional. The vinyl went on perfect but after i pressed it bubbles appeared. Does this happen with rapid tack?

@MakingwithMarilyn 6 месяцев назад

Rapid tac isn't really an adhesive, it is just a liquid that helps you be able to move your adhesive around before you heat it to the surface you are putting it on. As. long as you squeegee out all of the liquid, the vinyl goes on smoothly. But, you do have to make sure you squeegee it all out, just like when you are removing air from under the vinyl. I think I may have shown a close up of this cutting board after using the rapid tac. It was very very smooth.