Suede Headliner - E90 BMW - How To | Part 2

Подписаться 42 тыс.

Просмотров 57 тыс.

50% 1

In this three part video I will show you how to recover your cars headliner with suede. I am doing this on an E90 BMW because the headliner was starting to fall apart and it needed a new custom look. You can use this same step by step process on any car with any headliner material.
WEBSITE: for more upholstery videos and resources www.TheLuckyNee...
UPHOLSTERY QUESTIONS? Go to www.TheUpholsteryForum.com. Here you will find a community of all levels of upholsters and trimmers with questions just like yours, and lots of answers! The Upholstery Forum will be your best and fastest resource to get all your upholstery questions answered by multiple experts! Make sure you are registered on The Upholstery Forum, so if you ever get stuck on a project, you'll have a community of answers at your fingertips!
SHOP LUCKY NEEDLE MERCHANDISE: the-lucky-need...
ALBRIGHT'S SUPPLIES : I buy all my supplies here
www.AlbrightsS...
TOOLS & SUPPLIES
Synergy Suede: www.albrightss...
Wiss W20 Shears: amzn.to/2JEVKCd
Thread Snips: amzn.to/2JKJ2Sf
3M Bristle Disk: amzn.to/2MwFpRv
3M Relock Disk Holder: amzn.to/2tjAJpn
Utility Knife: amzn.to/2JlzZtH
Glue Gun: amzn.to/2nQxqpk
Weldwood Contact Adhesive: amzn.to/2nwDBO5
Small Pick Set: amzn.to/2GcwzUB
Nylon Pry Bar Set: amzn.to/2rHPKBg
Heat Gun: amzn.to/2JgyGwf
2" Painters Tape: amzn.to/2svtHx8
1" Paint Brush: amzn.to/2H8GUBs
Torx Sockets: amzn.to/2Kmuk3q
SRS-OBDII Code Reader: amzn.to/2tjj8O1
Air Grinder Kit: amzn.to/2LYpavp
Nylon Wheel Brush: amzn.to/2MCFIua
Wire Brush: amzn.to/2JMqox8
Small Wire Brush: amzn.to/2yoV0zm
Air Compressor: amzn.to/2MzwfDI
Shop Vac: amzn.to/2yiGRDQ
Propane Torch: amzn.to/2tkFbE7
Jiffy J-4000 Steamer: amzn.to/2GKa8X0
Suede Shoe Brush: amzn.to/2ymSBFq
SEM Color Coat: amzn.to/2JNJFhG
FREE APPRENTICE COURSE VIDEOS
www.theluckynee...
LUCKY NEEDLE UPHOLSTERY COURSES
www.theluckynee...
LUCKY NEEDLE MEMBER SIGN UP
www.theluckynee...
FACEBOOK
/ theluckyneedle
PINTEREST
/ theluckyneedle

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 79

@sunpacbrolygokuzu3609 6 лет назад

Awesome video, Subbed. And to anyone doing this make sure you get really sharp scissors and really sharp razors. Also, don't just get spray adhesive, get contact adhesive/cement aswel. There's going to be areas where you're going to have a really hard time getting at with just adhesive. And just a little more advice.1. Get another person to help you (you're really going to need it) it'll help like you wouldn't believe. 2. Preparation is key. Get a pen and paper and write down everything you'll need. Plan what, when, and how you're going to do this especially when wrapping the headliner. Don't rush! 3. I love my Bimmer but damn it's a bitch how they designed the fitment of things lol!. 4. If you're like me and it's your first time doing a headliner and it happens to be a Bimmer..... Then cut all your plans for the weekend.

@Theluckyneedle 6 лет назад

Glad you like the video! and great advice

@steezyg9746 2 года назад

Lol as I’m sitting here wanting to replace the headliner on my 08 335 because it’s falling down pretty bad right now

@th3m00g9 5 лет назад

Bloke, you rock... 👍🏼... Super helpful, super informative... Thank you for making great tutorials. From the not so sunny UK 🇬🇧

@Theluckyneedle 5 лет назад

Thanks!! Happy it helped!

@forrestlyric6378 3 года назад

I guess im asking the wrong place but does anyone know of a tool to get back into an Instagram account?? I was dumb forgot the account password. I would love any assistance you can offer me.

@ernestnikolai8415 3 года назад

@Forrest Lyric Instablaster :)

@forrestlyric6378 3 года назад

@Ernest Nikolai i really appreciate your reply. I found the site on google and I'm in the hacking process atm. Seems to take quite some time so I will reply here later when my account password hopefully is recovered.

@forrestlyric6378 3 года назад

@Ernest Nikolai It worked and I actually got access to my account again. I'm so happy! Thank you so much, you really help me out!

@FPSAnarchy Год назад

Nice guide ! Might do mine with some nice fur if i ever find something cheap, good to see its not too annoying

@markmadruga5121 6 лет назад

Always look forward to your videos they’re a great source of information for us beginners. Please keep making em.

@Theluckyneedle 6 лет назад

Thanks Mark! More videos to come!

@keyboard101101 6 лет назад

Thanks a lot man. I've been looking for a video on how to do this. I have the same car.

@Theluckyneedle 6 лет назад

Nice! Send pictures when your done!!

@abc796 3 года назад

You explain the curve issue I just met so my first attempt was fiailed, yeah that areas is hard to deal with

@HussienA 6 лет назад

Man your amazing! Greating from Bahrain

@Theluckyneedle 6 лет назад

Thanks!

@serenitysoundscape 5 лет назад

just done this to my E90 thank you for sharing this, extremely helpful !

@Theluckyneedle 5 лет назад

Glad it was helpful! I bet it looks awesome!

@serenitysoundscape 5 лет назад

@@Theluckyneedle worth the effort! looks amazing!

@guy539 3 года назад

How many yards of fabric did you use?

@michaelwheels1220 2 года назад

Another great video! You're very meticulous have a great work ethic!

@junky9 3 года назад

Actually a brilliant simple way to remember suede Direction awesome

@davetreanor5303 2 года назад

Great guide. I’m covering the headliner in my BMW f82. The centre dome wrinkles are a nightmare. I’ve only used a hair dryer so far. Just bought a steamer. Gonna try it tonight

@m.g.5203 2 года назад

What's the outcome? Thine the home's for the handle's are very deep. But F32/F82 doesn't have, right?

@m.g.5203 2 года назад

What steamer do you have?

@dan-rouxjordaan9724 Год назад

Brilliant work mate

@Phil-r7j 10 месяцев назад

Nice vid...you got the bases covered. Im not having so much luck with the same fabric-synergy suede. Using the same adhesive sprayed on, I get soak thru the fabric in multiple spots, plus foam separation, while alcantara I've used for door cards, with no issues at all. Wondering if I really have the same fabric as you or a knock-off.

@Driftmitrov 5 лет назад

Perfect job and lesson!

@Theluckyneedle 5 лет назад

thanks!

@sinisterstitchescustomupho1817 3 года назад

Albrights is a great co. I’ve been dealing with them over 20 years.

@drillingmachine 4 года назад

"You got my homework finished, McFly?" Haha, good work on the video! I learned something today.

@itolond Год назад

some lay the faom backing first then alcantara - your opinion?

@jameskantlehner4046 4 года назад

I don't know why, but this guy reminds of George McFly lol Great job on the headliner, though!

@imsavor 3 года назад

I know exactly why. It's his voice, mannerisms and body language. All on point

@blakebuchner4900 2 года назад

if they aren’t already sticky

@askhan5448 5 лет назад

good job thanks for the vidio

@thecoolestlace Год назад

Is that Grey, Medium Grey, or Platinum?

@goodgood4134 4 года назад

Good job 👍

@leahtaylor2851 2 года назад

Could u have sanded foam off in area that u were worried about

@wh1zz_b4ng Год назад

Where did you get the container that you use for the glue? The round one with the lid! Thanks in advance

@73kokitch 5 лет назад

Why not using Alcantara? And which is better Suede or Alcantara? Thanks bro good video!

@Theluckyneedle 5 лет назад

Alcantara cost around $100 per yard and I not that easy to get theses days. If this were a higher end car I would have used a more expensive suede but for this job synergy suede works great and is affordable.

@73kokitch 5 лет назад

The Lucky Needle Thanks for your reply, all that makes sense! Keep those informative videos coming up!

@Theluckyneedle 5 лет назад

Thanks!!! I will!

@azcopwatch4132 5 лет назад

What did you use to dilute your glue? I know it is pretty thick. I appreciate your videos. Thanks

@Theluckyneedle 5 лет назад

You shouldn't have to dilute the glue at all. Sometimes if the glue has gotten old and a little to thick I have used acetone to thin the glue.

@TheHamadanners 6 лет назад

Awsome thank you

@Theluckyneedle 6 лет назад

Welcome! Glad you liked it!

@johng2268 3 года назад

We can use only fabric with foam or we can use and a foamless fabric?

@ramseshuerta14 3 года назад

How much glue do you think you need for a project like this? Will one gallon work?

@jjscritchfield5814 4 года назад

How do you remove any Weldwood if you accidentally get it on the finished side of headliner?

@bdbincorporated 4 года назад

would it be better/easier to lay foam then suede instead of foam back suede?

@Theluckyneedle 4 года назад

In hind sight yes it probably would but I originally thought it would be a little easier than it was.That's why I went with the foam backed option

@roberto0612fcb 3 года назад

WHAT KIND OF GLUE DO YOU USE FOR FOR FOAM BACK HEADLINER????

@bajiphotography9484 2 года назад

Curious what using steam does? Does it help the fabric stretch? I'm trying to do the same job on my E39 and the grab handle wells are my Achilles heel on this job because of how deep they are. I'm using dinamica, which is similar to suede and alcantara, and has very little (if any) stretch. Would using a steam gun help me out here?

@9GSR 5 лет назад

Hi, quick question. you got the suede headliner with the "1/8" Foam Backing" Right??!

@Theluckyneedle 5 лет назад

yes 1/8" backing on the headliner and non backed on all the plastic trim pieces

@johnescoffery5787 3 года назад

Your link for the suede doesn’t work...

@johnescoffery5787 3 года назад

Can you please provide the exact material code or whatever information u have on this suede! I want to get that exact Grey for a grey e46 M3 interior (pillars & headliner & rear speakers deck) I have been looking at yourautotrim.com & undecided if that’s the regular grey or platinum headliner fabric. I’m having a professional like yourself to install so no DYI for me lol please

@darrinsiberia 4 года назад

kinda talks too much but other than that super awesome videos... informative and professional.

@ruinedgarage7908 4 года назад

How much headliner material did you buy (?x?)

@williamsantiago7303 4 года назад

Awesome video friend, very informative. I have a 2011 Ford f250 pick up truck and I took the headliner out. It's not sagging because the material is a fabric that doesn't have a foam back to it. To me the fabric looks like it was made into the liner board itself. Someone asked me if it came out of a Toyota because they said that Toyota's use a headliner like the one in my truck. I don't want to use a foam back material because when they get old they put out alot of dust. Like I said the fabric on my liner is like molded together with the backing. I had plans to clean it and then glue on another material to the one that's on there already. What material and glue would you suggest? Did the headliner in your video have a material with a foam backing on it or is it like mine where the fabric is not foam backed and looks like it's molded to the backing? If you touch my head liner your finger won't sink in like it would with a foamed backed fabric, mine is fabric but you can't push your finger in it because it doesn't have foam and I need a material that will stick to the old material. Sorry for such a LONG question and comment. Thumbs up on your video bud, take care.

@Theluckyneedle 4 года назад

In the video I use a foam backed suede. Because your headliner does not use foam backed material you are free to use any material you like. Just glue it straight to the old material.

@williamsantiago7303 4 года назад

@@Theluckyneedle Thanks for the reply and the info bud.

@haleym16 5 лет назад

Are you using real suede or faux? All I can find is faux suede in the Albright store.

@Theluckyneedle 5 лет назад

You would never want to use real suede for automotive uses. Real suede is far to delicate and will fade quickly in the sun. All suede you see in cars is synthetic suede.