Тёмный

Suicide King Squonk Mod and Carnage RDA from PURGE Review 

Morten Oen
Подписаться 9 тыс.
Просмотров 12 тыс.
50% 1

Опубликовано:

 

29 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 93   
@MajorBigBuds
@MajorBigBuds 6 лет назад
Morten thanks for sharing but the when using the refill bottle you need to push the air out of squonk bottle when you have the mod upside down then and turn upright wait to see air bubbles go into refill bottle then squeeze refill bottle, repeat until full. Beautiful purge squonk mod and very expensive.
@mortenoen434
@mortenoen434 6 лет назад
Thank you, Reigle! I'll stick this on top of the comments. Well done!
@bikendigarciademadinabeiti4956
Happy New Year Morten!! You'll dig refillers! My method is similar to Reigle 72's, squonk all the air out with atomizer attached, press as much squonk bottle as you can. Unscrew atty holding squonk bottle pressed, start screwing refiller horizontally to avoid leaks and finish it vertical with liquid on the bottom so jo air gets sucked in. Press the refiller as you feel with finger the squonk bottle getting filled, repeat. I use dark bottles all the time, by feel you'll fill them to the top by 2-3 refiller squeezes. Quick and clean AF
@mortenoen434
@mortenoen434 6 лет назад
Thanks Bikendi, I think I get it now:-) Happy new year to you too!
@bqwood
@bqwood 6 лет назад
Guys, take a look at this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HLy_Bnf9MlM.html The problem with that squonk filler is that the filler bottle *ALSO* needs an inner tube, a bit like the bottle that fits into the box itself. With an inner tube ("straw") in *both* bottles, filling becomes super simple. Morten, I'm not sure if the bottle that ships with your mod is able to have a "straw" like this fitted beneath the 510 male connector, but see if you can do it. I've used the one from ModMaker.co.uk for months now and filling a squonk is super easy with it.
@mortenoen434
@mortenoen434 6 лет назад
Thanks Bradley! I have the valve system from Lost Vape, and I have looked at a lot of other videos. I have some tubes lying around, so this would be cool to try. Might make my own "refilling video" when there is enough material to do so. And when I figure out a method on my own:-)
@Black_noir_mw3
@Black_noir_mw3 2 года назад
TO USE THE REFILL BOTTLE: take your rda off, screw the refill bottle into your 510 threads for your rda, turn the whole mod and refill bottle upside down, squeeze all the air out of the squonk bottle in the mod, and flip it back over to let the pressure from the squonk bottle suck the juice from the refill bottle, getting a perfect refill every time, repeat process if you still have bubbles left over
@EazySDJ
@EazySDJ 6 лет назад
Great video, I could listen to your voice for hours. Been considering this combo for 2 weeks. So expensive but beautiful mod. This is the only review I have seen on the Suicide King so thank you for that. 👍
@mortenoen434
@mortenoen434 6 лет назад
Thank you, Arch Angel! I still vape it dayly. It is the hardest hitting single battery mod I have, and the Carnage RDA is phenomenal as a single coil RDA (thats why they built that strange deck). Highly recommended!!!
@therealslimshady8903
@therealslimshady8903 4 года назад
id say the thickness of the brass takes longer to heat up and stay warm is why it does not patina as quickly as a tube mod thats my guess ive just ordered mine in 2020 and manage to pay half what it was sold for originally but its just such a masterpiece of beauty
@Deer3083
@Deer3083 2 года назад
You know you can buy brass polish and get rid of the patina right? I use polish for my copper and brass purge mods and rdas.
@mrajewski
@mrajewski 6 лет назад
Love your reviews and your honesty.
@mortenoen434
@mortenoen434 6 лет назад
Thank you Michael! I do my best:-)
@wbryanjackson7310
@wbryanjackson7310 6 лет назад
Thank you. I have stumbled on your videos and I am thoroughly enjoying them.
@mortenoen434
@mortenoen434 6 лет назад
Thanks Bryan!
@johnyewdall398
@johnyewdall398 6 лет назад
I think the Wasp Nano is in my price bracket. I could never afford this but an absorbing video. Thank you.
@mortenoen434
@mortenoen434 6 лет назад
Hi John! I got myself 3 of the Wasps, and I'm so looking forward to talk about this RDA. I thought it looked a bit akward on the Suicide King, so I went for the Carnage on this review:-)
@bikendigarciademadinabeiti4956
Wasp owns the Entheon and it's 10€!!!!
@mortenoen434
@mortenoen434 6 лет назад
I agree 100%. I'm just trying to figure out how, before doing the walk-through of the Wasp.
@chrisparkin499
@chrisparkin499 6 лет назад
Great mod and RDA, and a great video. I use my refilled differently. Once the refill bottle is screwed in place, I turn the mod upside down. At this point, the juice in the mod bottle has flowed down to the 510 pin, and the end of the bottle tube is in the air, not liquid. I then squeeze the mod bottle to evacuate the air into the refill bottle, and hold the mod bottle pressed whilst I return the mod the right way up. I then let go of the mod bottle and this draws liquid from the refill bottle (I sometimes give the refill bottle a squeeze to hasten the process. I repeat this, but it only takes 1 - 3 inversion/squeeze attempts and the mod bottle is full. In short, I am squeezing the air out, rather than the liquid in to the mod bottle. I hope that helps, it really works much faster that way.
@mortenoen434
@mortenoen434 6 лет назад
Thank you Chris! Most helpful comment:-)
@petertedd5768
@petertedd5768 6 лет назад
Hi Morten, great review on an awesome set up. I have exactly the same set up but am using dual coil. Tonight I will change to a single coil to see what effect that has. I have the same issues with the refill bottle and thanks to your video I may well be able to fill it properly. Thanks again.
@mortenoen434
@mortenoen434 6 лет назад
Thanks Peter! I have to confess that I still just remove and open my bottles for refill. Only on Lost Vape products do I use a "system" for refill. Tell us how you like the single coil set up when you have tested it!
@petertedd5768
@petertedd5768 6 лет назад
Hi Morten, tried a single build last night, yes definitely better, the taste as well improves by just using the single airflow option. Excellent, thanks again :) I have just bought the red Rampage and Red Carnage to go with my Suicide King for an every day, take to work mod and it is a very nice set up as well. Not quite on a par with the King but still excellent. I also put a single build on that. :)
@mortenoen434
@mortenoen434 6 лет назад
Thank you for reporting back, Peter! I have never had a single battery/single coil setup like the Suicide King. And all my other squonkers uses a lot more energy too. I find that I can go through a whole bottle of juice without having to change the battery. The SK is just another level of vaping!
@mechanicalmonkey7777
@mechanicalmonkey7777 6 лет назад
Amazing mod and review brotha..... hope all is well ...
@mortenoen434
@mortenoen434 6 лет назад
Thanks man! Doing better than ever:-)
@ZDRIVE007
@ZDRIVE007 6 лет назад
Naval Brass refers to a copper alloy of around 59% Copper 40% Zinc and 1% Tin with a trace amount of Lead. This alloy falls into the subfamily for Brasses known as Alpha Beta or Duplex Brasses. ... Tin is included in the alloy composition in order to improve the corrosion resistance of Naval Brass.
@mortenoen434
@mortenoen434 6 лет назад
Thank you sir! I'll cut and past that info in my notes! The mod is now slightly more amber/ rainbow colored at places, but still very shiny and golden. I have never seen anything like this alloy. It's still like a mirror to look at.
@richardlarsen5626
@richardlarsen5626 6 лет назад
Great review, thank you Morten
@mortenoen434
@mortenoen434 6 лет назад
Happy new year Richard! And thank you:-)
@richardlarsen5626
@richardlarsen5626 6 лет назад
You are welcome, and I hope 2018 is good for you and your family.
@ΕυαγγελιαΚαλατζακη
happy new year!!! very nice review !!! ilove all there products,ging to do mine single coil straight away.
@mortenoen434
@mortenoen434 6 лет назад
Thanks! And great! Please report back with data and results:-)
@ΕυαγγελιαΚαλατζακη
YOU WERE RIGHT NO HEAT ON TOP!!!PREETY SMOOTH DRAW FOR A SINGLE COIL ON A PRETTY BIG TOP CAP RDA!!!!THANX ALOT AGAIN GONNA SQUONK THE HELL OUT OF IT!!!!
@mortenoen434
@mortenoen434 6 лет назад
GO FOR IT MAN!!!
@Me-and-lacie-my-cat.
@Me-and-lacie-my-cat. 6 лет назад
purgious i know this is a stupid question mate should i run battery positive down or up ?
@mortenoen434
@mortenoen434 6 лет назад
Positive down, Jack:-)
@jeremy8942
@jeremy8942 6 лет назад
The lack of patina likely has to do with a little science.. has to do with the galvonic exchange(I could be using the wrong term). The screws that secure the delrin insert are likely becoming the focus for the oxidation. Similar to how they keep copper lightning Rod's from corroding. I recently came across your channel, and it is nice to see the straight forward approach in your videos.
@mortenoen434
@mortenoen434 6 лет назад
Thanks Jeremy, I'll keep an eye on them and make a revisited video in a few months!
@PfarrerHerzblut
@PfarrerHerzblut 6 лет назад
I Love your reviews ❣
@EngrMoe
@EngrMoe 6 лет назад
Thank you for the review. I do have number 008 and I really love it....
@mortenoen434
@mortenoen434 6 лет назад
Awesome!
@jeremy8942
@jeremy8942 6 лет назад
With the refill bottle... If, while you have it upside down, you squeeze the bottle in the mod. This pushes the air into the refill bottle. Then flip upright and it will fill flawlessly.
@mortenoen434
@mortenoen434 6 лет назад
Thanks Jeremy! Will do a refill special one day:-)
@frankdrebin2747
@frankdrebin2747 6 лет назад
Hey Morten i really really like your videos. Especially the airflow and wicking tutorials. Well done sir ! Have you ever tried the new Reload 1.5 BF RDA ? I think its also one of the best ones for flavor out there. Greetings from Germany and keep up your great work !
@mortenoen434
@mortenoen434 6 лет назад
Hi Frank! And thank you:-) No, I have only done a review of the 1.0. And as far as I can see form the images, I'm on the fence regarding the 1.5. Will test it if I get my hands on one, but there is a lot on my table right now. Thanks for suport!
@frankdrebin2747
@frankdrebin2747 6 лет назад
Btw is there any reason you always space your flat coils a little bit or is it because of the flattening you do and its not perfectly straight ? Is it possible to make a flat contact coil ? I am asking because i bought some 24G SS flat wire and i am about to test it :)
@mortenoen434
@mortenoen434 6 лет назад
Hi Frank! I have space because I hammer the wires myself, and they get very, very thin;-) Its easy to glow them as contact coils if I do a semi-flat wire, or use a commersial one that are much thicker (0.3-0.5mm)
@alanmirko3815
@alanmirko3815 6 лет назад
thx for the review!
@bikendigarciademadinabeiti4956
Sick Hagermann engraved Purge squonk Morten!!!! Just the artist's engraving job is worth money, plus naval brass instead of the alu from the basic squonk. The alu one goes for 275€ in my country, not a bad deal for a limited edition IMO. Great piece of Functional Art.
@alexbuttler4889
@alexbuttler4889 6 лет назад
Very interesting to watch, thanks Would like to see you review WASP Nano soon
@mortenoen434
@mortenoen434 6 лет назад
The Wasp is next in line. Some small stuff to iron out first.
@Mohamed_Elshekh
@Mohamed_Elshekh 6 лет назад
Hey morten i wanna learn more about mechs am planing to buy one of these and use it as single coil build like you do but am still afraid of things going wrong am plannin to buy a 20700 ijoy battery and a coil around 0.25 or 0.30 i should be okay with this one ?!
@mortenoen434
@mortenoen434 6 лет назад
Yes you would be ok:-) You can build down to 0.19 Ohm no problem. Remember that the volt drop is about 0.4 Volt, so you can go pretty low with the Ohms.
@Mohamed_Elshekh
@Mohamed_Elshekh 6 лет назад
Morten Oen another thing i found it on evcigarettes and the photos they have on the product kinda seem its fake diffrent lettering shape of the word “PURGE” and the one inside the door that says “ purge mods made in the usa “ you have it horizontal typed and they have it on vertical type of engraving in the back of the door so i hope you can guide me before making the purchase or if there is any other site who might still hold into these in the US ... Cheers
@mortenoen434
@mortenoen434 6 лет назад
If it is different from mine it is probably a clone. There are just a few of them that are made (500), and they come in a signed suitcase with signed certificate, and all of the 500 are identical. I bought mine in a store in Norway that deals with Purge directly, as they also do with Philippine mod makers. I have no idea where you can get a hold of an original nowdays. You just have to look around on US web sites. Good luck, man!
@Mohamed_Elshekh
@Mohamed_Elshekh 6 лет назад
Morten Oen i know its much to ask but if you could check the link and tell me your feedback from da photos they got ? They seem legit tho i also mailed purge and waiting for their reply www.evcigarettes.com/suicide-king-hagermann-edition-squonk-box-by-purge-mods/
@alexanderdrewek1440
@alexanderdrewek1440 6 лет назад
You let the air out of the bottle in the mod first then you do exactly what you were doing so you let the air out of the small bottle so that you create a vacuum in that bottle it'll suck the juice through the fill bottle and it'll fill itself right back up
@korgeth
@korgeth 6 лет назад
Happy New Year.
@darylhill9509
@darylhill9509 6 лет назад
That is the best looking mod I've ever seen Defo gotta get me one. Your wicking is kinda strange tho dude 😆 but if it works for you who am I to judge
@InDisskyS131
@InDisskyS131 5 лет назад
They are a bit tough to find.
@mortenoen434
@mortenoen434 6 лет назад
I mailed Purge about the lack of patina on the mod, and got this interesting answer: "This has come up a bit. We assure you that the brass is the same 343 Naval brass we used before. This is just thicker than we usually make it so it's going to take longer to patina through the brass than normal." I never knew that the thickness of the material would affect the grade and speed of patina. I have allways thougt it was a surface thing, as you can polish it away. You learn something new every day if you dare to ask quetions :-)
@bikendigarciademadinabeiti4956
So the small % of Tin added to the copper and zinc mix, that drastically reduces the amount of corrosion of Naval Brass vs plain copper and zinc Brass, is not the real reason?
@mortenoen434
@mortenoen434 6 лет назад
As I understand it, yes. My neighbour is an armorer and blacksmith, and he said that there was nothing special about "naval brass", he had not even heard the term used in context, and he's an Englishman. He knew about 10 other types of brass and mentioned them. He thinks it's a marketing thing. He even makes bronze swords for fun. We talk about metal every other day, and he said the same as Purge. Btw he loved the mod:-)
@bikendigarciademadinabeiti4956
Your neighbor has very good taste☺!! Learned something new me too, now i won't argue that. Very interesting conversations to have with your neighbor, now I'm going to learn about those other 10 kinds of brass didn't know about 👍
@bikendigarciademadinabeiti4956
About the internals gotta agree with you, would love to see ultem for the whole internals.. But milling a block of pom is dirty cheap compared to ultem, a block of quality ultem is not cheap at all, quite expensive actually..
@mortenoen434
@mortenoen434 6 лет назад
Yeah! I guess they use ultem for the bottle holder because it's glued to the contacts. But made of gold and silver these contacts will never get hot.
@bikendigarciademadinabeiti4956
It definitely matches the squonk bottle like a glove made of Japanese silk ☺!! Guess if they didn't put it there we would be complaining about excesive bottle movement when pressing the power button, you know. Actually, thinking as i'm typing, that might be the reason of being for that ultem cage, that 510's side play you pointed could get worse with bottle moving freely.. Maybe some ptfe tape around the threads could be of help to stop that side play?
@mortenoen434
@mortenoen434 6 лет назад
I think the side play is due to the fact that there are very beefy o-rings inside of the peek gasket. To make everything adjustable and water tight this works great, but yes, it looks bad and cheap. But all this movement probably takes its toll on the o-rings and gasket, and that is the reason you get a bag of goodies with spares. As I'm typing this, I really start to like the concept more and more, it's like... organic. It gives without breaking, it moves without leaking, and the button is soft as a womans... well, you get it :-)
@bikendigarciademadinabeiti4956
Haven't seen the internals of the 510, it was just a wild guess, but better flexing than being rigid as you say. Haha, get you :-P
@xavierpelat1879
@xavierpelat1879 8 месяцев назад
Merci
@sergiolewes
@sergiolewes 5 лет назад
to me that rda gets hot, not confortable at all, other than that am pretty happy with the mod
@InDisskyS131
@InDisskyS131 5 лет назад
My carnage doesn't get hot at all.
@bikendigarciademadinabeiti4956
#VoltageDropExposed Oh no Morten, you are gonna burst another bubble ☺☺ !! Just two simple thick stripes of 24k gold plated silver, a 24k gold plated silver floating pin over a 24k gold plated silver spring, and a 24k gold plated silver nut and contact for the 510, are beating Comp tubes?? We don't need half a kilo of Russian copper?? Where is the endless fine threading massive weight button?? No magnets?? And, and.. it is not a hybrid!!
@antonklokk
@antonklokk 6 лет назад
Bikendi Garcia de Madinabeitia Ogueta I have asked Purge about the contacts on this box and they are made of tellurium copper that has a plating made of 24k gold alloyed with silver.
@mortenoen434
@mortenoen434 6 лет назад
Sorry 😀 😀 😀
@bikendigarciademadinabeiti4956
Anton Zaitsev Thank you for the precise info!! Everywhere it seems to be advertised as 24k gold plated silver. Tellurium seems to bring some interesting properties into the table, being added to copper 👍.
@mortenoen434
@mortenoen434 6 лет назад
Thanks Anton, I'll put that up in the comment field. Great team work here, guys!
@bikendigarciademadinabeiti4956
Cupronickel is a grea material too, since i was introduced to it by the Broadside and Admiral tubes, got a cupronickel tube that is a joy. Trying to get some tubing and sheet to make some custom parts. Been working with 20awg and 21awg copper sheet too, making nice bends and punches. Should be cooking silver nitrate this weekend, and getting some nasty chemicals and protection to start plating experiments.
@geralddorrian100
@geralddorrian100 6 лет назад
morten, you mention the adjustable wheel above the squonk bottle. I'm having some issues with mine. When I first used it i could not get it to fire and I couldn't understand why... I finally adjusted the wheel by looseni g it quite a bit and it then was able to fire. Is this a locking mechanism? It seems as if I thread it all the way up it does not fire, however when it is positioned about half way down ( the position in which I feel it makes best contact) The whole apparatus seems loose... what is the function of the wheel? is it a lock or does it serve to hold together the. 510 mechanism??? Please help, you can msg me on fb messenger or e mail me at dorriangerald@gmail.com
@mortenoen434
@mortenoen434 6 лет назад
Greetings Gerald! Yes, the 510 pin and wheel seems loose, but that is due to some beefy o-rings inside the construction. It is ment to flex, thus giving a softer button push feeling. This is also the reason you get some spare ones (o-rings). I questioned the same thing, but after the video I truly understood the construction. The function of the wheel is to adjust for the length of the 510 pin of the RDA. If you feel the flexing is too much, try changing the o-rings inside the 510 construction, yours might be broken.
Далее
Squeezer squonk mod, polish & fix
28:51
Просмотров 17 тыс.
This is how Halo felt as a kid 🤣 (phelan.davies)
00:14
Less Lethal Handguns (Gimmick Or Legitimate???)
25:21
The Craziest Drugs You've Never Heard Of
18:48
Просмотров 2,1 млн
JerryRigEverything - Bend Test Fails (2015 - 2023)
18:00
Microsoft Makes Windows Worse With AI
9:34
Просмотров 182 тыс.
Opiates From Sugar: A Fermentation Route
15:30
Просмотров 570 тыс.
M4 vs AK47; which is deadlier?
23:05
Просмотров 3,3 млн
The Njord RDA, airblades & flavor tutorial
13:37
Просмотров 11 тыс.
Which Nerve Agent is the Most Evil? (Nerve Agent Lore)
20:00