SUNSEEKER L22 Series Robot Mower Installation Guide 

Hi Chris, thank you you for your interest. The setting means you can choose where the machine start working. Here is a instruction for you: If there are two options for you to set, 1 and 2. Both points are on the boundary. And the percentage is the distance between the charging station and the start point (1 or 2) as a proportion of the whole boundary. Normally, after the machine get out of the charging station, it will start working when it moves to the point 1 and it will start working at point 2 at the next work. And then it is the point 1 after twice works. For example: You set point 1 is 0% and 2 is 24%. The mower will start working after it get out of the charging station at once because the distance is 0. Also, if you set point 1 is 100%, it will seem as the 0%. At next work, (we assume your boundary is 100 ft), after mower get out of the charging station, it will move 24 ft alone the boundary to the point 2, and then it will start working. And,yes! if you choose 4 starting points and set 0%, it will automatically rotate between each starting point for the next 4 mows.

@@SunseekerUS Thanks for the reply! Helps a lot. Love my L22.