Super Affordable Ryobi 18-Volt Digital Inflator And Deflator Review Model P747

Подписаться 214 тыс.

Просмотров 128 тыс.

50% 1

RYOBI has a new 18-Volt ONE+ Dual Function Inflator/Deflator capable of completing both high pressure and high volume applications. The Dual Function Inflator/Deflator includes a high-pressure hose, high-pressure nozzle, Presta valve adaptor, sports ball needle, high volume hose, and pinch valve nozzle. This tool is sold for $49.98 MSRP. That is half of the comparable models.
----------------------------------------------------------------
► Ryobi ONE+ Dual Function Inflator/Deflator (Tool Only): thd.co/38SiAmj
► DEWALT DCC020IB 20V Max Inflator: amzn.to/36O5DrN
► Milwaukee 2475-20 M12 Compact Tire Inflator: amzn.to/2Z2i3K1
----------------------------------------------------------------
Ryobi Dual Function Inflator/Deflator Pro's
- High volume inflation/deflation for large inflatables
- Brass threaded tire chuck
- Digital gauge for easy set it and forget it tire inflation
- Priced well at $49.98
- Works well for small fill-ups or large inflatables

Con's
- The Sound is not the most comforting as it sounds loose
- Digital Backlit gauge can be hard to read
- 5-minute duty cycle. 5 minutes on, rest for 5 minutes
Duty cycles are normal for all air compressors and inflators. Most of them will vary slightly. The 5-minute duty cycle is short when comparing this model to others on the market, but it is not too far off. If you pay attention and follow the duty cycle, this style inflator will last a long time. Many people don't care and let them run and we show you in this video how hot they get.
#ryobi #diy #powertools #tools #ryobination #ryobitools #ryobipowertools

Хобби

Опубликовано:

19 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 158

@sickduck4799 4 года назад

Have this and love it I was nervous about the heat after first use until I figured out the duty cycle. Great review as always!

@jenniferlanham2042 3 года назад

Thank you! I love this channel Every time I want a new Ryobi I come to this channel. This video told me this is exactly what I need for my pool floats Lawn tractor tires Bicycle tires and SUV ! this will be my 7th Ryobi tool. Yes, they are MY tools. Im a DIY gal

@reverendandy3279 3 года назад

I love this channel. Every time I get a tool or project in mind, 9/10 times you've got a video to help me make my decision. Thank you for doing what you do!

@WorkshopAddict 3 года назад

Thank you very much!

@beateh8122 2 года назад

Great review. Thank you! I love my Ryobi inflator/deflator and thought I'd give the tube storage another look after you mentioned not knowing how to correctly store it around the housing either and floats around. If you take a close look at the storage part on the side, it has the directions actually imprinted on how to correctly wrap it around (between in inflator/deflator markings). Just tried it out and it works!

@a.a.alexander6030 2 года назад

Good review thorough enough not just 3 or4 minutes and I liked the examples you talked about and the fact you checked with a different gage. This Ryobi beats our some smaller inflators where you have to keep your finger on the trigger - that's okay inflating a ball or small mattress but not a car tyre.. Definitely width having as kit round the house and I'd do what you've done and install the 6 ah battery so the unit doesn't struggle as much.

@GiveAbundance 4 года назад

I have the old style one and it's been great! Filled alot of tires with it.

@tommiewilliams1383 3 года назад

Thank you for the Ryobi review!!

@Perspectologist 4 года назад

I have an older version of that pump. It has worked well for me. Mine seems to be about 1.5 psi lower, so I just add that. I hadn’t had to think much about the duty cycle as I’m normally just adding a few psi, but I appreciate the benefit of your experience with that. Mostly I love the convenience of the battery and being able to quickly move around the car without the DC cord my old inflators had.

@WorkshopAddict 4 года назад

I no longer use my compressor to fill up tires unless they are new mounts. Love these inflators!

@cardo1111 4 года назад

Nice review, with some very helpful advice 👍🏽

@NormRidg 3 года назад

Works great with topping off my high pressure tires on our fifth wheel. 10 psig from 65 to 75 in about 4 minutes with very little power drain on the battery. Does what I expected from it.

@WorkshopAddict 3 года назад

You can't do all 4 without a break... That is the one big downside.

@alexzakk612 4 года назад

great review. i dont like reading instructions so you are always my go to. keep it up!

@guillaumepare9651 3 года назад

You're not missing much. The instructions are average. I'm a french canadian and had to read in english because they obviously used a translating tool like google. Pathetic. BTW, Transport Canada made soem research and for each 2 psi you are below the recommanded pressure, your fuel consumption will be 1% higher. If your four tires are 3 psi below, that's 6% more fuel...

@kylehazachode 4 года назад

I’m glad they replaced the old model. My first one’s screen and buttons started freaking out so I bought a replacement (same model). I just bought this newer one when the old model breaks again.

@rongarcia6582 2 года назад

Solid review! Looking forward to watching more of your videos.

@WorkshopAddict 2 года назад

Much appreciated!

@OGRH 11 месяцев назад

4:26 Ryobi's current handbook (for this style unit) says, "10min. on-10min. rest" Don't know if yours said differently at the making of this video, but I am updating/clarifying your review as a public service... 💪🏻

@paulwatson5787 2 года назад

Great video thank you as thinking of getting one for upcoming camping trip to keep up the air in the tyres. Lots of information thankyou. I am still thinking about staying with a foot pump but if need air on muddy ground could be a issue

@charlesvarnelljr9776 4 года назад

Love mine. Very accurate.

@DL-oi9gl 3 года назад

@7:05, actually this inflator has 3 rubber pads/feet on the side that's opposite to the LCD display. So I think it's meant to be laid flat on the ground with the LCD display facing up when in use.

@JonasSkullerud 4 года назад

Thank you for stating that it will not deflate tires. Which is really the only complaint I have about the old model.

@Simonofcalifornia 4 года назад

Thank you for telling about the condensation. It will lead to the tire/wheel to go off balance and your vehicle shaking.

@thebigdoghimself 4 года назад

I've got the Milwaukee and I love it. In fact, I just used it today to blow the crud out of my keyboard. For filling up the kids bike tires and checking a car tire from time to time you can't beat it. It's far easier than having to power up the big compressor and dragging a hose line out to the driveway.

@m60mgman 4 года назад

For my use on our passenger cars, it’s fine, especially for only $35 at HD. I’m going to add a little length with a Schrader locking tire chuck.

@LukeCreates 9 месяцев назад

Did not read the manual, have not been using duty cycles at all... whoops. I've probably put about 75 minutes of runtime on this thing, fill my RAM ProMaster 2500 tires to 80 PSI no problem, and done some inflatable pools. Thanks for the heads up.

@jamesmcrae5674 4 года назад

I have the older model. I use it to do my ram 2500 8 ply tires rated at 70psi. I set it for 50psi and I check it and its always at 49. It absolutely will not go past 50 for its duty cycle. The higher pressures are for speciality bike tires.

@maxlake2 8 месяцев назад

Great job! And thanks!

@skywalkr2 3 года назад

perfect for my use case as I only have cars/small suvs

@718stix 2 года назад

After watching this video I'm assured I'm getting this tool .as I was not to sure about getting it

@chlorine11 4 года назад

I prefer the previous version, mostly for the tire valve connector. The old one used a thumb lever to lock onto the stem, I don't like the new style. When mine died I sought out another of the old version to replace it with instead of the new one.

@JamesBond-be4cw 3 года назад

Pressure will be off at high psi due to thermal cooling. As that hot air cools inside tire, pressure will drop.

@gateslattes4686 3 года назад

Amazing unit

@neilhenthorn1212 3 года назад

Great video

@AmericanSCPO 3 года назад

I picked this up for 48.00 bucks @ home depot 10% military discount covered taxes. For 48.00 it does a pretty Damm good job inflating my super expensive tires on my Mustang, my 4 runner, and my Harley Road Glide. Remember when you go into something where to set your expectations. For 48.00 this met my expectations perfect it inflates my tires to the correct pressure.

@hobbs3424 3 года назад

great vid, ima get me one.

@vikto07081980 11 месяцев назад

Fantastic inflator

@Jackman66666666 4 года назад

Good info, Could you review the Harbor Frieght inflator when you get a chance?

@emmakrause1049 Год назад

*Great air pump **MyBest.Tools** Faster than my old plug in pump and twice as handy without having to drag the cord around.And it works with my existing Ryobi drills battery.*

@SWIFTY5150 2 года назад

Just ordered one from Home Depot. I only need it to top off tires and not needing to drag my large compressor or portable air tank out is worth what I paid for it.

@RomansFiveDotEight 2 года назад

Regarding semi tires, would you really ever need this for that? Aren’t there fittings that let you use the trailer air supply to inflate tires?

@drevilatwork 3 года назад

If they put a digital pressure controller why can't they just add a temperature sensor so it can cycle on off on its own? The electronic brain is already there. Just needs a thermocouple and couple lines of code

@TheImtoomuch 3 года назад

Excellent point!

@Pahoe77 8 месяцев назад

Likely because it's only $28

@austindecker2512 8 месяцев назад

Why don't you go make your own then 😂

@mrgold3591 Год назад

I had the Ryobi batteries already and use the P747 to adjust the PSI in my vehicle tires every few months or as needed (spare tires also). Use the inflator for my pedal bikes. It is small enough to toss in the hatch on road trips.

@medpilot 4 года назад

I believe the dewalt 10 min duty cycle limit comes into play when using it over 100psi. I own the dewalt and it’s been a really good unit.

@WorkshopAddict 4 года назад

I too really enjoy the Dewalt but my instructions say nothing about it being over 100 psi for the duty cycle. Might be that my instructions are from a model that was just released?

@medpilot 4 года назад

WorkshopAddict actually I got that info from another RU-vid video. So I guess take that with a grain of salt. I have seen where the dewalt inflator was continuously used for 20 mins without issue.

@WorkshopAddict 4 года назад

@@medpilot IMHO, ignoring a duty cycle is like shooting without ear protection. You might not notice it right away, but sooner than later, you cant hear anymore and your inflator is broke.

@medpilot 4 года назад

WorkshopAddict I can see that. Heat is the enemy. The Dewalt is fast enough where most of the jobs I throw at it last under 5 minutes.

@Jay-ns5ub Год назад

I guess I abuse the sh*t out of my dewalt inflator. I use the low pressure high volume then switch to the high pressure low volume to blow up my inflatable paddle board to 13.5 psi. This is done when it's usually 90-100 degrees Fahrenheit out. Then, I do the same thing to my girlfriends board. Each board takes about 30 min. Been doing this for a few years now and my dewalt still works fine.

@EATSLEEPJD 2 года назад

Love Ridgid quick connect vs this

@CALVINLNIKONT 6 месяцев назад

Is there any way that a universal quick disconnect can be adapted for use on the high-pressure side? I don't like to have to screw on the air hose and would like to use a Jaco quick disconnect.

@robertvass2756 3 года назад

Hi! Do you think it's possible to hook up a spray-paint pistol to this? I know it's a stupid question, would really appreciate if you got the time to reply! Thanks!

@jameskyle2238 Год назад

the large inflate hose, there is a diagram that shows you where to put it on the side of the unit.

@crobertson1506 3 года назад

How long did it take to fully inflate the tube?

@AntonioClaudioMichael 4 года назад

How do you like that Milwaukee M12 infrared gun

@cheftodd 4 года назад

I have a sprinter van with dual rear tires, any idea if you can add an air extension chuck to this unit to get to the inner tire?

@WorkshopAddict 4 года назад

It looks like you would have to find one that would screw into the hose like a valve assembly. Not sure on this.

@jullianhalley763 Год назад

Does the pressure gauge work on the low pressure side?

@vaanes 4 года назад

This seems like it’s meant to add just a little pressure to a tire so that TPMS lights turn off

@WorkshopAddict 4 года назад

This is probably best suited for smaller jobs like that. It is not an air compressor.

@Xmaverickxxx 4 года назад

I have the dewalt one but this ryobi one is on sale for 35$ at HD so I might get this because ppl keep borrowing my dewalt one

@thetoolmat8632 4 года назад

Yeah at $35 I had to get one, can always return it before 90 days if not satisfied..

@aluisious 4 года назад

It's for sale but they won't ship it. I'm not driving 100 miles for a $35 tire inflator. Someone at Home Depot needs to learn how to use UPS.

@Hugolopez732 4 года назад

aluisious I just ordered mine and got it shipped to my house, but I’m only about 30 miles or so from Home Depot

@Harvz78 3 года назад

Compare it to Milwaukee M12 tire inflator please.

@brokeandbored85 3 года назад

Can I use this to pump a inflatable paddle board

@donnysanner342 4 года назад

Do u know if that works off of a little piston or something like a reed valve ? You would think that they could do some kind of a hybrid system..i know keeping the size down is important but a 5 minute duty cycle needs some improvement.....using some parts off a little compressor compatible with whatever battery you were using would be a must. I have a dead flexvolt compressor as well as a dead DeWalt inflator......hmmmm. Maybe there will be a marriage Good video hoss...

@WorkshopAddict 4 года назад

No piston, just two small non lubricated diaphragm like pumps.

@EcSsAwS 2 года назад

Mehhh Personally I went this route I only need a small compressor to have in my truck toolbox.. I went to Walmart and got a 800watt power Inverter And went to harbor freight and bought a 3 gallon compressor.(I already had hoses And fittings ECT) So 90$ later it has bailed me out of countless situations.. and I personally feel it's more of a long term solution (over a year so far) And I just rely on my vehicle battery.. Very good points on using it just for bike tires n such.. Mine gets used for truck and car tires. Trailer tires And when I cut firewood..it gets used to blow off saws as well

@1hjehje 4 года назад

This looks really nice. I'm wondering if it will fill a one person kayak (low pressure type).

@WorkshopAddict 4 года назад

Yes, it will, just remember the duty cycle.

@64offsuiter 25 дней назад

@@WorkshopAddictwondering the same thing for my paddle board. Will my paddle board pump tube connect to it? How can I know?

@Downgrader 2 года назад

I just purchased and the notification in the manual indicates a duty cycle of 10 minutes on/off…do you think they improved the product since this review?

@WorkshopAddict 2 года назад

I do not think they improved it. Run it 5 minutes and feel the air hose. My guess is that it will be very, very warm. I think they are just pushing it a bit so more people buy it.

@UMepher 2 года назад

Anybody mod a Ryobi dual inflator/deflator? Looking for examples with a dual-head air chuck, like you might want for truck tires. Or any other mods to the hose?

@kevinhummer7941 4 года назад

Just got this tip maintain my ninja motorcycle tires since i never do for a lack of having this. I imagine since i never do it being a couple psi off wont get me killed. That saidi did but this to do the weekly psi checks on my bike people recommend so my question is if anyone had any on if i should put that extra couple psi through in manual

@WorkshopAddict 4 года назад

Set it for a half pound more than what you want and that will account for any loss you might have removing the hose. This has been a pretty accurate tool and once it is done pumping will give you a readout of the PSI in the tire. No need to add much more than a half psi and that is really not needed.

@charliedaubitz2046 Год назад

If the pressure gauge gets off, power it up and press run and mode till the display flashes, it will reset it to zero

@jacobgroezinger1606 4 года назад

Will it run until it burns up or is it "smart" and will shut off automatically at 5 min/thermal protection?

@WorkshopAddict 4 года назад

Not Smart. You can burn it up. In fact most have complained about the rubber tube failing at the connection point near the pump. That is due to overheating this unit.

@GuitarsAndSynths Год назад

So do you set the pressure inflator to the psi value you want it to inflate to in automatic mode like say my car tires are low at 20 psi and I want to inflate to 35 psi how would that work?

@WorkshopAddict Год назад

Yes, you can set a target psi and it will automatically shut off at that psi.

@potterh2300harry 3 года назад

at 2:15 you mentioned the air tube was very hot. Is hot air bad for the tires? Does it cause condensation?

@deanfirnatine7814 3 года назад

I have a large truck with oversized tires, what would be a good option for that?

@WorkshopAddict 3 года назад

I fill my 35's on my jeep with it, but only to go from 32 to 36 psi. It takes a long time with larger tires and has a duty cycle that you do not want to go over.

@liveuntetheredmusepodcast4832 3 года назад

thank you! i almost bought this piece of junk! lol

@aaronporter2180 4 года назад

seems like they could put a small pc style fan in that unit to help with that temp issue

@WorkshopAddict 4 года назад

The issue cannot be corrected with a fan. It's the non lubricated pump design shared by all infoators

@aaronporter2180 4 года назад

@@WorkshopAddict yeah i guess but casting heat fins into the pump housing and adding airflow would help but maybe not enough to make it worth it

@aaronporter2180 4 года назад

@@WorkshopAddict if you have a chance it would be a neat test to run the inflator for the 5mins take a temp then point one of those cordless fans at it and run the test again

@WorkshopAddict 4 года назад

@@aaronporter2180 the temps are high from the internal friction and compression of the air. A fan will do nothing. Sorry, if you look at how they are built and made, it might be more clear.

@aaronporter2180 4 года назад

@@WorkshopAddict that's like saying the heat created in internal combustion engine is created by exploding gas so air flow couldn't help cool the motor and yet air cooled engines exist

@KingCuba0731 3 года назад

would you say the Milwaukee is worth it for the extra $40? my use is for tires and bikes

@WorkshopAddict 3 года назад

No I would not say it is worth it, but the metal connections are nice over the plastic. Watch the duty cycle with plastic fittings.

@mannykaras7278 2 года назад

Hi , is there attachment for presta cycle tires? Thanks

@WorkshopAddict 2 года назад

Yes, and it is fussy to use. Do not screw it on too far or it will push open the presta valve and not let it close.

@treadlightlyservicesllc.1930 4 года назад

This is another repackaged Ryobi inflator, every Green inflator that they have come out with the coupler between the motor and the pump shear off before you hit 85 PSI. if you're trying to blow up a trailer tire, the only good inflavor that's ever come from Ryobi has been the original blue one shaped kind of like a football it's oval in nature with an inflator deflator on one side, and a high-pressure on the other side. I still have that tool and it is out lasted four of the different Ryobi green ones that I've had since then.

@WorkshopAddict 4 года назад

I hit 125 with this, but was pushing the duty cycle and it was HOT. No failure. This should be rated for an 80 PSi max as it is slow over that on normal tires.

@jetrus2013 11 месяцев назад

We have used the ru-vid.comUgkxOTeIs0vv4_9B5hsmnLsk9r930uDQLu_Y for probably 30 hours with our camper and it’s been great! The noise level is really only noticeable when running the AC and other appliances like the microwave, hair dryer, or coffee pot. It’s not huge like other ones and it has wheels so even at 90lbs, I can move it!

@kenmasters2025 Год назад

how loud is it?

@user-qr5lj1ro1d 4 года назад

🙂👍👍

@morty007 2 года назад

Not a word on the battery.

@MCAQUIN0 4 года назад

will a 4ah battery be too big for this? like will it still sit flush on the ground

@WorkshopAddict 4 года назад

Fits perfectly and flush.

@edgaryzen4925 8 месяцев назад

@@WorkshopAddicthow about 1.5ah? Any consequences or disadvantages? I acquired it as a gift recently for free. Battery runs fine. Thought?

@WorkshopAddict 8 месяцев назад

@@edgaryzen4925 1.5 Ah works on this. It is small and will not run overly long. That battery is made for small tools and will not deliver much power, even on drills. So if you stick with this brand, get larger Ah batteries.

@edgaryzen4925 8 месяцев назад

@@WorkshopAddict thank you so much! I took your advice and got me 2x 4aH 18V battery from HD for $40 OTD

@promo130 2 года назад

can you use it with a nailgun like with a normal compressor?

@WorkshopAddict 2 года назад

No, it does not have a tank to hold air.

@promo130 2 года назад

@@WorkshopAddict oke, thanks alot

@jaydowwg8150 Год назад

I.just bought one for my golf cart tires .do you think it's good for that???

@WorkshopAddict Год назад

Yup

@jaydowwg8150 Год назад

@@WorkshopAddict thank you

@EnthusiastsGarage 4 года назад

milwaukee needs an m18 inflator. their m12 doesnt get the best reviews.

@WorkshopAddict 4 года назад

We like the M12 due its size.

@EnthusiastsGarage 4 года назад

@@WorkshopAddict it is nice and compact for its output but even with a m12 6.0 battery it seems to run out of steam rather quickly. apply that same milwaukee quality to an 18 volt version with a longer duty cycle and you have a winner.

@WorkshopAddict 4 года назад

@@EnthusiastsGarage Duty cycle is what kills these faster than battery life IMHO... If you follow the duty cycle rules, you can almost recharge the battery while it cools. LOL

@Couldbeazombie 4 года назад

I just got one of these and I am using my M18's batteries with it using an adapter.

@brianpritt4154 3 года назад

If you are topping off your tire pressure on all four tires, will this have consistent shut off pressure?

@WorkshopAddict 3 года назад

Yes, I do all 4 tires and it is very consistent.

@michealgonzales4498 2 года назад

How much does it weigh? and what air pressure does it produce?

@deez5396 7 месяцев назад

Not sure but it’s really light and up to 150 psi

@texcali3043 2 года назад

I have had this for about 5 months and it is already reading err when I try to use it.

@jo9732 2 года назад

What’s the problem with it? Will it still run? Worst case if it still runs without the digitals you can just run it and check manually.

@texcali3043 2 года назад

If it does not function as intended why bother with it. No it would not work manually.

@hermanmeyer Год назад

Just a comment about the heat and the duty cycle. Most people probably think it is the motor and compressor that are getting hot which makes the air hot. But I think it is the other way around. When a gas is compressed, it gets hotter. That's how air conditioners work to move heat out of your house even though it is hotter outside. I think it is actually this hot air that is heating up the pump more than the pump heating itself up. Look at the video "Fire Syringe" (ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4qe1Ueifekg.html) to see an extreme example of this. Using this logic, if you used that cool thermal camera and checked the hose temperature of a foot pump used to fill a bicycle tire to 100 lbs, it should also get pretty hot. Thanks for this video. I think I am going to get one of these.

@WorkshopAddict Год назад

I think you are partially right. However, these are oil free inflator and the way they compress air adds to the heat. The better inflator do not use plastic in the areas where they see heat.

@scorpio4236 4 года назад

This model is the biggest piece of junk I ever bought from Ryobi! I didn't even get to use it once and the hose broke off from the inside of the pump! I took it apart to see where it had broken off at...where the hose attaches to the plastic nozzle at the pump is under so much pressure, they have it bent at a 90 degree angle, which put so much stress on the plastic that it snapped off. I had the older model and it was build like a tank, had it for over 2 years and used it over 150 times.

@daves485 2 года назад

I was just at Home Depot looking at this inflator, it said it could pump up ten tires in 20 minutes on one charge, really? That would be great even on a 12v viair! Oh and it said inflator/ deflator… maybe new model?

@bayouboy5278 4 года назад

Is the battery included

@shecklesmack9563 4 года назад

A battery is not included, no.

@kieranrichardson7929 2 года назад

I go up to 150, I made a little homemade nerf gun and I managed to take it up to 150

@ronniin Год назад

No 12V is a shame

@samb1860 3 года назад

I cant use this to check my engine pressure huh

@jo9732 2 года назад

How can a manufacturer put out a product with no lubrication or cooling. This duty cycle really stinks.

@NedStone102 3 года назад

5 minute duty no good. 4 tires would take too long if very low pressure on each tire.

@inoahmann7542 3 года назад

I have run mine for way longer. The inflator will shut itself down when it gets too hot.

@6atlantis 2 года назад

@@inoahmann7542 it does not turn off, it’s not a “smart tool”, it will burn itself up.

@inoahmann7542 2 года назад

@@6atlantis do you have one? I've actually seen mine turn itself off after running for a while.

@6atlantis 2 года назад

@@inoahmann7542 yes I do and work shop addict said the same thing I did in this vid. It has a five minute duty cycle but it does not shut off manually. As a matter of fact the newer instructions say 10 minute duty cycle but I would stick to five, they just revised the instructions to attract more buyers.

@MichaelJones-bp6uj 4 года назад

Bought one for $35.00, it wasn't until I got home before I realized that it did not come with a battery, or a battery charger. You should mention this little detail.

@qseo7628 3 года назад

the package states, “tool only.” this means tool only and no battery

@bryanmiller476 3 года назад

$35 should have told you it’s tool only as even the smallest 1.5ah battery cost more than that normally

@MatthewDekort Год назад

The 5 minute use/rest periouds, might not be true, depending on the outdoor temperature. I find my tires lose air the most when it's cold (-20 C). Cooler temps means, at least in my experience, no duty cycle limits.

@JOHNHOANSHELT 4 года назад

Chick tool

@tracerit 2 года назад

Perfect present for your boyfriend this Christmas 🎄

@waynegram8907 2 года назад

WORKSHOTADDICT, which brands are the best power Inflator that won't get hot or overheat the compressor that is a handheld power inflator? I heard you have to get 18v to 20volt for the PSI to go over 65psi and it will pump air faster into the cars tire. The 12v power inflators take 5mins to pump air from a tire that measures 25psi to get it to 35psi which is 5 mins for only pumping 10psi into the tire.