No video :(

Super Beetle Mexico built vs Empi Sender differences. Testing done with cal. Gauge 7.5 reg.

Fuel gauge system for all VW's 69 and up to 2003

Подписаться 286

Просмотров 1,5 тыс.

50% 1

I do not recommend modifying the aftermarket vibrator/regulator nor calibrating the gauge to work with the 7.5... See my videos about Buck regulators and soon I will be doing a video on a simple regulator to resolve the aftermarket gauge issue.
Video shows the differences between the Super Beetle Mexico built and Empi Senders.
The Testing performed is with an aftermarket gauge that has been calibrated to the 7.5v regulator/stabilizer.

Опубликовано:

19 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 9

@scottwrite633 3 года назад

Thanks for this video. Your video is amazing. Getting to see first hand how all this works inside the tank in relation to the reading on the fuel gauge. My fuel gauge quit working a couple weeks ago and lol that bothered me to know end. I fixed it yesterday, but I’m still looking at as many video on RU-vid as I can to learn what I can for the next time. Thanks again! 76 black convertible with 1776 mofoco single weber 32/36.

@vwbeetlefuelgaugesystem 3 года назад

What did you do to fix your gauge?

@scottwrite633 3 года назад

@@vwbeetlefuelgaugesystem Fuel gauge started to read empty. I joined together the two fuel sender wires and fuel gauge read full. Put new sender in the tank. Filled the tank and the gauge read 1/2 tank. Then I pulled the speedo and put on a new vibrator from Jbugs and the gauge went to 7/8. I haven’t drove the car enough to know how the gauge works through to empty.

@vwbeetlefuelgaugesystem 3 года назад

@@scottwrite633 Well run it and see what happens down to the 1/4 tank or so... Do you have a dvm to read the resistances? 33 ohms from the sender with the center wire disconnected. R would be around 47 ohms.

@scottwrite633 3 года назад

@@vwbeetlefuelgaugesystem I have a dvm and will check it when it gets down to 1/4 or so. I have two wires on the sender. A yellow and a brown.... I should unplug the yellow wire and test ohms across the two sender prongs???

@vwbeetlefuelgaugesystem 3 года назад

@@scottwrite633 Yep. Yellow wire is on the center connection. Great that you have a DVM!