Super Bright Foglight LED Bulb Installation on Toyota RAV4 2019 2000 2021 

This is stupid, a fog light isn’t supposed to be like the headlight, it’s supposed to be yellow to cut through the fog. Congrats, you just made it useless

Nothing wrong with that. I prefer a halogen bulb so I can upgrade to led that’s very bright.

Meant to write “vid”….not “bud”. Lol

I’m wondering the same thing!

I had to replace them once recently, but they're inexpensive and easy replacements that it's not a big deal. My tires or even a few gallons of gas is more expensive then a set of these lol

Yes I pulled back the fender liner for more space. You don't need to fold it or bend it, but I did it so the camera could better see what's behind it. And on the 2021 toyota rav4, the fender liner doesn't seem to be the harder ABS plastic that is traditionally found on older cars. It's like a more flexible fiber insulation line. Hard to describe it, but what I did in the video didn't weaken or leave any marks or folds from what I could tell.

@@wallin626 Thank you sir.

From what I understand, the 2021 RAV4 (all models) come with factory LED headlights. Because of this, you wouldn't be able to change them. That's why it's best to go as bright as you can for the foglights to supplement the light output.

Yes, it's been over a year and after constant use, I have had to replace these once. Not a biggie as light bulbs are considered consumables. They're easy enough to replace and cheap enough to not break the bank.

I noticed that on the back of the stock bulb.

If you're purchasing aftermarket LEDs, just go with H11 / H16. They are cross compatible. Sometimes the compatibility on Amazon isn't updated, but it will fit. I do LED installations for a living. They are physically the same shape, but H11 usually higher wattage designed for headlight use. The only time it won't fit is if within the connector they have a little tab that prevents you from connecting the H11 into H16 connector. Usually aftermarket LEDs will leave all all the tabs which is why they'll tell you to connect it one way and if it doesn't power on, reverse the connector for polarity.

A led bulb that’s an H11 is a universal to the led market. It will fit, no matter if it’s H8,H9,H11,H16.

amzn.to/3gLTwSt

There's a direct link to the LED we used. Technically it's an LED headlight bulb that were fitting into the fog light. That's why it's so bright

The link unfortunately does work

As long as it has round foglights like in the video, it'll work. I know some of the newer XSE has built in LED foglights already so that might not be an option. If it's yellow-ish white like the "before", then it's upgradable.

If you're purchasing aftermarket LEDs, just go with H11 / H16. They are cross compatible. Sometimes the compatibility on Amazon isn't updated, but it will fit. I do LED installations for a living.

@@wallin626 I found ones on Amazon that work. Already installed. Thanks.

U complain easily. Putting a led bulb as a fog light use is very useful. No matter if it’s a busy road or country roads. With an additional ambient of wider beam pattern into the ditches. If gives u much better confidence on the road. Definitely useful fog lights.