Super Glue and Aluminium foil ! Pour Glue on Aluminium foil and Amaze With Results

Подписаться 682 тыс.

Просмотров 1,5 млн

50% 1

Hello everyone! You are watching video "Super Glue and Aluminium foil ! Pour Glue on Aluminium foil and Amaze With Results"
I hope you enjoy watching my video!
► Subscribe: bit.ly/Creationholic
On Creation Holic channel, you can learn various inventions, science projects, crafts and DIYs teaching how to reuse or recycle.
© Copyright by Creation Holic ☞ Do not Reup
#diy #diyprojects #tipsandtricks #recyclediy #superglue #aluminiumfoil

Хобби

Опубликовано:

8 ноя 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 480

@petervladyevich8535 5 месяцев назад

Thank you for all these exemples. With these knowledge i can make a lot of repairing

@creationholic101 5 месяцев назад

Glad it was helpful!

@alisonmary1443 4 месяца назад

Thank you, very useful tips with things at home. Great when you're in a hurry or for an even elderly woman on their own .

@creationholic101 4 месяца назад

Hello! I am very happy to read your comment. Have a good day!

@christopherlatham4254 5 месяцев назад

For number 2 use a few toothpicks and a bit of wood glue or even simple white glue.

@kerrischneider7693 5 месяцев назад

I agree...toothpicks are a zillion time faster n easier than all those steps!

@creationholic101 5 месяцев назад

Hello! thanks for your recommendation. Wish you all the best!

@giulioluzzardi7632 5 месяцев назад

Saw-dust mixed with woodglue using a dowel or toothpick. Keep your saw dust and wood-chips for these repairs.

@johnslugger 5 месяцев назад

*I use UV cure glue and clear food wrap and stuff it in the hole. Light it up with UV flashlight for 5 seconds and its ready for screws.*

@ebrahimi_shahin 6 месяцев назад

It was very informative and useful, thank you dear ❤

@creationholic101 6 месяцев назад

Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!

@BusinessButlers 6 месяцев назад

Great hacks except for #4 which is downright dangerous.

@creationholic101 6 месяцев назад

Hello! thanks for your comment. Wish you all the best!

@pepperdude 6 месяцев назад

You mean you don't do electrical work on stuff that's plugged into an active source? What could possibly go wrong? 😅

@gopalakrishnanms 6 месяцев назад

The voltage and current at the LED terminals won't possibly harm you as they are downsized by the circuitry. Of course, any electric work is inherently dangerous and a warning was appropriate.

@sajjadahmadvoc9388 6 месяцев назад

I like this no. 4th to try

@mikejosef2470 5 месяцев назад

@@gopalakrishnanmsYou willing to bet your life on that? First, they're wired in series.10 LEDs equals about 35V. The current is enough to kill you... takes hardly any. More to the point, we don't know why the unit failed. Maybe the voltage is too high. Lastly, as I said, they're wired in series. The foil bridge has little resistance, which means the voltage for 10 is now divided between 9 LEDs. They'll run hotter. If they cause a fire and that modification is discovered, your insurance claim will be refused. You could kill yourself or worse, someone else.

@darrenoak7187 6 месяцев назад

Excellent examples and demonstrations. Very usefull thank you

@creationholic101 6 месяцев назад

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

@jessisanturo 6 месяцев назад

You did not just risked yourself and taught kids to risk themselves getting electrocuted to smithereens to save $2 bucks ? Dude.

@creationholic101 6 месяцев назад

I think it's quite simple

@mikejosef2470 5 месяцев назад

Yeah it's simple... you disconnect the power before doing any work on mains powered equipment.

@gertbenade3082 5 месяцев назад

You forgot to mention that the LEDs inside the lamp is at HIGH mains voltage (depending on lamp design) since there uis no galvanic isolation and pose a SERIOUS risk should you inadvertantly touch any of the components on the PCB. Do not try this at home!

@devenyi73 5 месяцев назад

And as the resistance is lower now, all the other led's will went wrong quickly.

@creationholic101 5 месяцев назад

Hello! thanks for your comment. Wish you all the best!

@nestorbedoya5869 5 месяцев назад

Hola. Saludos desde Medellín-colombia. Muy interesante los videos. Se aprenden muchos trucos.

@creationholic101 5 месяцев назад

Glad it helped!

@user-yt8nu2vd4t 27 дней назад

Your ingenuity is purposeful and boundless!!! Keep it up!!! Genius and waste not want not are always appreciated!!! Robert W Goodwin MD aka Db

@creationholic101 22 дня назад

Thanks so much for watching our video. Wish you all the best

@mohamed5824 6 месяцев назад

Thank you, my friend, and I wish you good luck and success

@creationholic101 6 месяцев назад

Thank you too

@luiscantalapiedraconde8076 5 месяцев назад

De Valladolid, España Adelante. Os vemos con gusto.

@creationholic101 5 месяцев назад

Welcome to Creation Holic channel! Hope you have a good time while watching the video

@everythingtv1910 6 месяцев назад

thank you for sharing this video to view it is very clever ideas I wish this channel more success

@creationholic101 6 месяцев назад

Thank you so much!

@fazeinhaze2687 6 месяцев назад

This guy can fix any thing, wow🎉

@creationholic101 6 месяцев назад

Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!

@davidsanders6957 5 месяцев назад

MacGyver

@roscioocasio4385 5 месяцев назад

Thank you Creativeholic for this handy video. Thank you to the Community Members who also provided useful information as well. Best Wishes to all of you!

@creationholic101 5 месяцев назад

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

@zamaanan 3 месяца назад

You are amazing man! We look forward to teaching you new tricks. Sincerely yours from Iran

@creationholic101 2 месяца назад

Thank you! Cheers!

@shawnmurray7232 5 месяцев назад

Better way to do #2, just fill the existing hole with superglue, let it sit overnight & screw the hinge back in place. The fiberboard will absorb some of the superglue, the rest will harden in place, and you'll have a small dimple in the center where the screw goes. For hardwood doors, use superglue or wood glue and a toothpick or small diameter dowel.

@creationholic101 5 месяцев назад

Hello! thanks for your comment. Wish you all the best!

$@brettINsanfracisco$

@brettINsanfracisco 5 месяцев назад

wood glue + sawdust 👍 = best

@78tag 5 месяцев назад

"use superglue or wood glue and a toothpick or small diameter dowel" .....and go the added effort of centering the holes. That hinge isn't going to re-install properly.

@mariolarenas-negrete9263 5 месяцев назад

Thanks you😊

@sceptic2061 4 месяца назад

#2 was crooked due to poor alignment. I would rather follow your advise, than videos as holes are not enlarged and easier to aim at

@DIYTechTrends 6 месяцев назад

That sounds interesting! What's the purpose of pouring glue on aluminum foil? Is it to create a new super adhesive or just to test the glue's features?

@creationholic101 6 месяцев назад

Pour glue on the aluminum foil to create a bond and make it more sturdy

@franchico2franchico298 6 месяцев назад

Un led menos recarga los otros. Pronto se quemara la bombilla.

@maricarmenjordantorrent7575 6 месяцев назад

Pues yo he arreglado varias hace meses y siguen funcionando.

@mikejosef2470 5 месяцев назад

@@maricarmenjordantorrent7575I'll bet they haven't caused a fire either... yet. LEDs are meant to last a very long time, so there's a good chance there's a fault in the circuitry, then you add 10% more voltage to each led. If they cause a fire and the modification is discovered, your insurance claim will be refused.

@jamessouza7065 4 месяца назад

Most of them get refused anyways these days the thieving tapeworm son's of bitches!

@Regoriroger 26 дней назад

On #2, you could have just stuck toothpicks in the original holes and screwed everything back in place. The screws create new threads in the toothpick as you screw it down. Much easier than what was shown here.

@creationholic101 22 дня назад

Hello! thanks for your recommendation. Wish you all the best!

@maxcarter3413 6 месяцев назад

Using staples is a great idea!

@creationholic101 6 месяцев назад

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

@maxcarter3413 6 месяцев назад

This is someone who loves AU foil!

@Mulletmanalive 17 дней назад

I think anyone would love gold foil. Alum8nium is Al.

@ibapreppie 15 дней назад

Thanks, thats 6 mins I'll never get back.

@creationholic101 4 дня назад

Thank you! Cheers!

@WallStreet749 Месяц назад

Gary from Oklahoma USA Thumbs Up!

@creationholic101 29 дней назад

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

@oscardiegovelasquezh707 5 месяцев назад

Excelente canal me encantan los trucos caseros

@creationholic101 5 месяцев назад

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

@troyallen8223 Месяц назад

That LED isn't going to last without the proper ohms

@creationholic101 29 дней назад

Hello! thanks for your comment. Wish you all the best!

@Moh--Ali0909 14 дней назад

Good time, teacher, your works are really beautiful 💖🤌👍🌹 and unique 💖💖

@creationholic101 14 дней назад

Thank you! Cheers!

@Calsan_ 6 месяцев назад

Hello!! thanks!! From Seville, Spain

@creationholic101 6 месяцев назад

Welcome to Creation Holic channel! Hope you have a good time while watching the video

@caricaturistaxalap 4 месяца назад

Xalapa Ver. México, tu canal es muy bueno. Gracias por compartir tantos tips. Feliz año nuevo.

@creationholic101 4 месяца назад

Thank you, wish you a happy and joyful new year

@user-nk7lm1xr4g 5 месяцев назад

شكرا لك على هذا الفيديو المفيد انا من الجزائر

@creationholic101 5 месяцев назад

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

@vittoriovulpitta6456 5 месяцев назад

Molto interessanti le idee che ci hai consigliato e possono ottenere!. risparmiando, riuscendo, aggiustando, con il fai da te: con le nostre mani dà molte soddisfazioni gratificazioni!. Io sono dell'Italia centrale🇮🇹 sul Mar Adriatico Buon lavoro idee, ai prossimi video Buone Sante Festività!.

@creationholic101 5 месяцев назад

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

@radhizaaban Месяц назад

I have benefited a lot from these videos, thank you

@creationholic101 Месяц назад

Glad it helped!

@albertopapa-fragomen7713 4 месяца назад

Desde España. Muy buenos trucos. Muy útiles. 😊

@creationholic101 4 месяца назад

Glad you like them!

@samuelbailey1888 21 день назад

If you wish to clean Silver Jewlery or Silver plated utensils, put Aluminium foil in a basin, pour in hot water that has Sodium Bicarbonate dissolved in it & then put the Silver objects in so they touch the Aluminium. Wow! they clean immediately as they touch the foil.

@Notron-ku6dt 7 дней назад

Cleaning silver, gold, with Toothbrush and toothpaste. Top 👍👍

@thomaswolff6814 4 месяца назад

I see... the aluminum foil with the super glue helps you put your hinge on crooked. Nice!

@creationholic101 4 месяца назад

Thanks so much for watching our video. Wish you all the best

@maryloucano632 6 месяцев назад

These diys are what keep me up late at night. I also 'travel' a lot, lol

@creationholic101 6 месяцев назад

Glad you like them!

@fraserkaye4470 4 месяца назад

Hmm, I know what you mean man

@haroldyeager6124 5 месяцев назад

I roll up aluminum foil into a ball to clean the grates in my charcoal grill. Works great.

@creationholic101 5 месяцев назад

Great tip!

@user-mt7vx4fc9q 5 месяцев назад

بنده از ایران بیننده برنامه‌های آموزنده شما هستم بسیار عالی و آموزنده

@creationholic101 5 месяцев назад

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

@user-gh7ku9bj5w 5 месяцев назад

いいもの観ちゃった！ありがとう！

@creationholic101 5 месяцев назад

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

@noemizeiner6631 11 дней назад

Thank you much solutions

@creationholic101 8 дней назад

Happy to help

@marcomancin5648 5 месяцев назад

Sei un genio ora so qualcosa che prima non sapevo👍💯🤗

@creationholic101 5 месяцев назад

Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!

@coolnegative 29 дней назад

Also great for cleaning bbq grill, reflecting/directing wifi signal, and emergency auto fuses (good excuse to always have gum in your car.

@creationholic101 28 дней назад

That's a great idea!

@catherinewhite9086 6 месяцев назад

Some interesting ideas. I’m not sure I’d take the time to deal with an LED bulb like that though. It was still a “shaky” lightbulb. That would drive me crazy.

@creationholic101 6 месяцев назад

I understand your concern! Make sure you have safety equipment in place before doing so

@giuseppemartorano1413 6 месяцев назад

@@creationholic101😊😊😊😊😊 il 😂😅 mi 7😊😅 hu 😅 hu tu 😊 .y numuku Lloyd's KK o se la ok look 9!😊😊😊

@giuseppemartorano1413 6 месяцев назад

Ma oggi nn 😅🎉😅😅😅u. G Y😅😅 MM😢o II.

@giuseppemartorano1413 6 месяцев назад

@@creationholic101😅😅😅😅😅😅😮 fammi II pollo pollo solo se nn Buon 😮 Lo lum in😊😊un u in

@Michaelbor911 5 месяцев назад

Its only by camera rekord, not visible blinking for eye

@OsmanKErol 3 месяца назад

Do not solely rely on the switch before starting to remove the LED. Most of the switches cut the current on one line, therefore if you connect the switched line to Neutral (you have 50% of chance) then the live line will not be interrupted and you may get a shock when you touch the burned LED (depending on the position of the LED on the LED string, especially if it's close to the high voltage side) with a conductive tool. Totally unplugging the system from the mains is the best choice.

@creationholic101 3 месяца назад

Hello! thanks for your comment. Wish you all the best!

@prooffypro5834 24 дня назад

If the switch at 3:00 min is SPST, you should be at danger... It should be DPST switch. Or you have to disconnect the plug from the main socket.

@creationholic101 20 дней назад

Hello! thanks for your comment. Wish you all the best!

@vilmo51 6 месяцев назад

Bonjour de France, et merci!

@creationholic101 6 месяцев назад

Welcome to Creation Holic channel! Hope you have a good time while watching the video

@rlee4805 Месяц назад

Thanks for the tip

@creationholic101 29 дней назад

Thank you! Cheers!

@samuelbailey1888 21 день назад

Thanx for your great tips.

@creationholic101 21 день назад

Glad you like them!

@selincegim 6 месяцев назад

çok güzel videoların var. Teşekkür ederim.

@creationholic101 6 месяцев назад

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

@petersteiner872 5 месяцев назад

To the first “tip” - steel wool would do the same job cheaper…😉

@creationholic101 5 месяцев назад

Hello! thanks for your recommendation. Wish you all the best!

@user-ov1fe9wu1m 4 месяца назад

Thanks for your ideas. It is very useful for me. I'm from Ukraine.

@creationholic101 4 месяца назад

Glad it was helpful!

@hiratoshi229 4 месяца назад

素晴らしいアイデアです👏👏👏👏👏

@creationholic101 4 месяца назад

Thank you! Cheers!

@diegovisentin9261 5 месяцев назад

Good tips👍 Greetings from Venice Italy

@creationholic101 5 месяцев назад

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

@Moh--Ali0909 14 дней назад

I'm from Iran❤❤❤❤❤❤❤❤❤❤❤❤❤

@creationholic101 14 дней назад

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

@passolargo4832 5 месяцев назад

Boas dicas, vlw! Mas no primeiro caso, dos parafusos na madeira, dá menos trabalho e tbm fica bem preso, encher o buraco com palitos de dente ou de fósforo, e voltar com os parafusos originais...

@creationholic101 5 месяцев назад

Hello! thanks for your recommendation. Wish you all the best!

@Spiderdan-59 5 месяцев назад

I like that LED light cheat❤❤

@creationholic101 5 месяцев назад

Thanks so much for watching our video. Wish you all the best

@Bulvan123 5 месяцев назад

I clean my aluminum foil with aluminum foil so I can reuse it. When the aluminum foil i use to clean the other aluminum foil gets dirty i take another piece of aluminum foil & use it to clean the aluminum foil that i use to clean the aluminum foil so i can use it again.😊

@creationholic101 5 месяцев назад

That's such a great idea

@jamesmeader6539 Месяц назад

Since you had a soldering iron as in #6, why didn't you just use that to fix that LED bulb? A single drop of solder bridging the pads for that bad LED is all it would need. However gluing a piece of foil over them will result in a poor mechanical connection when the board heats up, and possibly even a high-resistance connection that will heat up and possibly start a fire. Use the right tools and methods for the job.

@creationholic101 Месяц назад

I want to give more measures to people who don't have a soldering iron

@Mohamedb54 6 месяцев назад

شكرا هذه الافكار.

@creationholic101 6 месяцев назад

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

@burakkurt5338 17 дней назад

İ am from TURKEY

@creationholic101 14 дней назад

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

@duketorres 4 месяца назад

Thanks! Brazil!

@creationholic101 3 месяца назад

Thank you! Cheers!

@francienvanhee-bc6py 4 месяца назад

Ik kom uit Nederland en kijk graag je filmpjes.

@creationholic101 4 месяца назад

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

@wagnerfernandes2642 4 месяца назад

Fantástico, muito bom.

@creationholic101 4 месяца назад

Thank you! Cheers!

@MyMarfis 4 месяца назад

Muy buenos tips

@creationholic101 4 месяца назад

Glad you like them!

@tntroo7009 27 дней назад

Way cool stuff!! Thanks!

@creationholic101 22 дня назад

Glad you liked it!

@user-yt8nu2vd4t 27 дней назад

A fan!!! USA, HAWAII!!! Db

@creationholic101 22 дня назад

Thank you for watching

@sergiosilvatpBRISR 6 месяцев назад

👏👏👏👍ABRAÇOS E DEUS ABENÇOE, MAGÉ RJ

@creationholic101 6 месяцев назад

Welcome to Creation Holic channel! Thank you so much for your support

@Alotipsalo Месяц назад

"Wow, this video blew my mind! Using aluminum foil and super glue to fix various items is such a genius idea. I never thought these everyday materials could be so versatile. Can't wait to try out these hacks myself!"

@creationholic101 Месяц назад

Thank you! Cheers!

@zelihaolur5368 4 месяца назад

❤sizin bilgilerden çok yararlanıyorum bazı bilgilerden bende çkk büyük fikirler çoğalıyor umut ediyorumki bu bilgi çeşitliluğinden daha fazla atılımlar göstereceğim başarılarınız daim olsun eğitimsisteminiz güzeliklerle dolsun saygılarımla

@creationholic101 3 месяца назад

Glad it helped!

@cherylroberts1839 22 дня назад

"May your education system be filled with beauties" I hope that's Google's misinterpretation and not what you actually said?

@RosyOutlook2 5 месяцев назад

I'd use a wooden dowel or wood shavings & wood glue let dry then screw the hinge in for number 2. The led light trembling and flickering like that is not something I care to have in the house, it would make me batty. Cool other wise, thanks

@creationholic101 5 месяцев назад

Thank you for sharing your feedback. Have a good day!

@ligiafreire4199 11 дней назад

Rio de Janeiro! Brazil

@creationholic101 3 дня назад

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

@view1tema 6 месяцев назад

Good idea

@creationholic101 6 месяцев назад

Many many thanks

@enfield7123 5 месяцев назад

I use aluminium foil to clean the aluminium engine casings with aluminium cleaner

@creationholic101 5 месяцев назад

That's a good idea!

@dougaschenbrenner802 28 дней назад

That loose illumination LED didn't necessarily need to be removed. A quick dab on either side with a drop of new solder would have gave it new life, if it was loose due to insufficient solder.

@creationholic101 23 дня назад

Thank you! Cheers!

@Zaubersterndli 4 месяца назад

Hello from Switzerland greetings😊

@creationholic101 4 месяца назад

Thanks for coming

@BostjanBizjak-px9jl Месяц назад

Nice ❤❤❤

@creationholic101 Месяц назад

Many many thanks

@delcomagnani 13 дней назад

Ciao, ho guardato il tuo video dalla Romagna Italia, grazie per avere mostrato come risolvere alcuni problemi.

@creationholic101 4 дня назад

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

@no-di3je 5 дней назад

Japan😊❤❤❤

@creationholic101 2 дня назад

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

@leonarddriller2608 Месяц назад

Len from New Jersey USA

@creationholic101 29 дней назад

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

@asturiasrobocop1341 20 дней назад

LIKE if you wanted him to put superglue in the silver chain (bracelet) too!

@sly2566 2 месяца назад

From india

@creationholic101 2 месяца назад

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

@isailyai808 5 месяцев назад

سلام از ایده‌های شما استفاده می‌کنم و بسیار علاقه‌مندم من این روش را تجربه کردم و عمر لامپ‌ بعد از تعمیر کمتر از ۷ روز مجدد می‌سوزه،ولی این روش برای لامپ‌های بالاتر از ۲۰ وات بسیار مفید و عمر لامپ طولانی‌تر است. موفق باشید💐

@creationholic101 5 месяцев назад

Thank you for sharing your feedback. You can weld it for longer life

@XB10001 29 дней назад

3:14 the failed LED already had a dot on it. 😁

@creationholic101 28 дней назад

Please try and feel

@Rocky3ooo 5 месяцев назад

5:40 Battery put in with reversed polarity but still works, ha 🤣🤣

@tclbdr2261 5 месяцев назад

Hey that's right - negative always goes to the spring

@matexf 5 месяцев назад

Battery up side down

@misterxf3388 5 месяцев назад

By himinee that's correct.

@creationholic101 5 месяцев назад

You can check that the battery is installed in the correct direction

@matexf 5 месяцев назад

@@creationholic101 no it isn't

@user-lb1pm8dp3u 5 месяцев назад

Im afgan its very good

@creationholic101 5 месяцев назад

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

@mikeuva2273 5 месяцев назад

hi from south Carolina usa

@creationholic101 5 месяцев назад

Welcome to Creation Holic channel! Hope you have a good time while watching the video

@miked9958 5 месяцев назад

great video!

@creationholic101 5 месяцев назад

Thanks for the visit

@smallmodelcollector 5 месяцев назад

Nice hacks; hopefully no one electrocutes themselves fixing a light bulb.

@creationholic101 5 месяцев назад

Thank you so much for your comment! have a nice day!

@giulioluzzardi7632 5 месяцев назад

Safety 1st, wear a crash-helmet incase you get a jolt by touching a capacitor, it will send you flying...or worse.

@user-fz5rh9vo2v 5 месяцев назад

I from Iran❤

@creationholic101 5 месяцев назад

Welcome to Creation Holic channel! Hope you have a good time while watching the video

@sceptic2061 4 месяца назад

Cleaning iron based tools with Aluminum foil would cause more corrosion due to galvanic corrosion effect on the Residual aluminum. Unless you can ensure it either covers whole surface OR no residue is left. I get that these are quick fixes for when you can't go to the store but having a piece of sand paper at home is a must. If needed use wet sand, but make sure everything is dry and properly lubed. Also make sure the sand is course enough not to get stuck in hinges.

@creationholic101 4 месяца назад

Thank you for sharing your feedback. Have a good day!

@geopap1965 4 месяца назад

From Greece

@creationholic101 4 месяца назад

Welcome to Creation Holic channel! Hope you have a good time while watching the video

@mustafaaljawhar1563 4 месяца назад

Your follower from Iraq

@creationholic101 4 месяца назад

Welcome to Creation Holic channel! Hope you have a good time while watching the video

@Biffo1262 Месяц назад

A simple blob of solder across the LED terminals is so much easier and permanent.

@creationholic101 Месяц назад

Hello! thanks for your comment. Wish you all the best!

@kathybray7156 5 месяцев назад

Cool ❤😮

@creationholic101 5 месяцев назад

Welcome to Creation Holic channel! Thank you so much for your support

@user-rm5kd8qi9n 4 месяца назад

你好我來自台灣，請問陽台的遮雨棚，有破洞要用什麼來修？謝謝你

@creationholic101 4 месяца назад

you can refer to this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-q8JBsNyIgUE.html

@gilbertoalvesdeoliveira3246 6 месяцев назад

I'm from Brazil and thank you for creating this public service channel, it's a 10....👏🏻👏🏻👏🏻👏🏻👏🏻

@creationholic101 6 месяцев назад

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

@allyoucando8486 3 месяца назад

Those ideas with aluminum are not bad

@creationholic101 3 месяца назад

Thank you! Cheers!

@nielolee День назад

Why did you choose to use foil in number 2 over the normal suspects like Baking soda or styrofoam or charcoal or cement or cotton

@ioannisvasileiou 6 месяцев назад

Good morning greece

@creationholic101 6 месяцев назад

Welcome to Creation Holic channel! Hope you have a good time while watching the video

@Mulletmanalive 17 дней назад

That fourth one is a good way to risk arcing. Bridging it out with solder, or preferably a resistor would be safer. The sixth doesn’t really count. Man, the number of ways you’ve come up with to fix that cupboard door…

@creationholic101 5 дней назад

Thank you for sharing your feedback. Have a good day!