Super glue trick the cops dont want you to know 

Hello everyone, I went through a divorce and I no longer upload any content to this channel. Come subscriber and check out my new channel here ru-vid.com/show-UCXkPZYO5clqp8WmKaQo-Rbwfeatured

Im still waiting for the secret the cops dont want us knowing lol

As someone who makes card stock and chipboard minis, this tip changed my game a few years ago! It makes my pieces like they’re wood. The strength and bond of this combination is insane!

Hey, thank you for this. I saw this a couple years ago and it has changed my world. I use it all the time to build and repair things that really have no buisness being fixed.

i thought he was going to show us how to hide cocaine with super glue..

I looked at this video while back a year or so ago and I realized that acrylic nails that they do in a beauty salon is almost about the same kind of a situation and I used it it works really good thank you for showing me this I appreciate it

Very good video, I've been a mechanic for 50 yrs now, no joke, wasn't award of this trick. Thanx! And I admire your commitment to bible study and helping others.

As a woodworker, one of tne pitfalls is when a chip occurs, especially around a drilled hole or at an end of a saw cut. Using the thicker type of super glue, apply it to the the chipped area, press in the finest bits of sawdust available, allow it to dry, sand it smooth, and you're good to go.

You could add fine graphite powder to the baking soda . Mix well until you get a grey color. Or use ground cinnamon with the baking soda and mix it dry. Get a light brown color .Take ground cinnamon , fine graphite powder, baking soda and mix it together. You get a nice brownish black color. THEN fill a cracked plastic object by the crack, use a small spoon or brush and wipe the dry colorant you made into the crack. THEN add several drops of super glue along the crack. Instant welds the two pieces back!

And why should the cops care how you get your skitz on. Maybe around children but this is as old as someone with a jar of peanut butter and bumps into someone with a chocolate bar...lol

This video is 4 YEARS OLD!! and definitely a top ten for me. It’s one of those simple genius skills only a few know. Love it!

You can repair chipped bone knife handles and guitar parts with this method also. It doesn’t matter what order you combine the stuff . Once they touch, the combination becomes hard as stone. It’s standard procedure for repairing a chipped bone guitar nut or filling an improperly cut string slot.

Wish i'd known this before....i've spent a fortune fixing things sprinkling cocaine on super glue 😂🤣

I've always wondered why the police ask me for "license, registration, insurance and super glue bottle". This explains it, no wait, it does not explain it.

I'd actually like to see a video on how to use a bottle of super glue more than once.

Actually you fill the crack with the baking soda and then put the glue on it... it soaks in nicely and hardens really well.

This kind of random “actual person makes something” stuff is the treasure of youtube in my opinion. Great stuff man

I repaired a highly detailed section of a porcelain figurine using this method. Once I built up the area, it was easy to shape it with needle files and super fine sandpaper. A little Testor’s model paint, and the repair was virtually undetectable.

This cement is a secret weapon taught to me by my physics teacher. Ive used it for impossible things and its instant and strong and long lasting.

At the top of a guitar neck is what's called the nut. It's what holds the strings in place. The slots in the nut that hold the strings need to be a specific depth. So there's nut files that are the same thickness of each string. If you cut the nut slot too deep, instead of buying a new nut, you add baking soda and then drip super glue on the baking soda and then re file the slot. Yes, it's rock hard!!

I filled the “crack” in my nose with some “baking soda”.

used it to fill a crack in my old cars padded dash ,sanded it and touched it up with paint,,,,,perfect!

You are an excellent teacher of the information you have acquired in your trade. I love how your personality shines through and you added some comic relief but still kept it quick and to the point. Learned something new, thank you and God bless.

While in the Navy as an engineer super glue was the best thing to fix o-rings, and baking soda added to it got repairs done fast and equipment back on line.

Superglue works great for pinhole punctures in bicycle tires. Just a dot over the hole, drys quick, and you're back it the saddle!

I've used that method to repair my RC airplanes when i've crashed them. SUPER strong and is as hard as a rock when it dries.

In the guitar world we use this on the nut on the top of the fretboard when it gets too worn down and refile it to the correct depth.

Excellent tip. I put my baking soda in an old empty Elmer's Glue bottle. You can tilt and puff a fine dusting on to your target or you can (once you get good at this) lay what looks like a Perfect White Weld. Since seeing this Video years ago I have used this technique to repair Almost everything that might break on me. And it can be used to just Hold something in place while you Really Go to work with Rod Welder or Silicone Rubber. Instant Grip. Thanks for this one.

SO WHY AGAIN DO THE COPS NOT WANT ME TO MAKE O-RINGS?? CLICKY DONT YOU THINK.

That was very good information and I learned something. I'm 60 Years old have been a mechanic/welder my entire life and don't act like I know everything but feel like I have done everything. I have used superglue in my tool box many years mainly sizing o-ring's when there is absolutely no other options , oh don't want to forget about stitching my hand,arm or another cut back together. I also liked the part on spending time with the inmates that I can relate too. You have a wonderful family and I hope life is good too you 👍🏼.

Whole family need a manicure

I learned this tip 25 years ago, when someone suggests I use it to repair a cracked plastic body panel on my motorcycle, and some of the plastic was even missing. Like you said, you feel the void where the plastic is missing with super glue, and sprinkle the baking soda into it, and after several applications, you can make any shape you want. I rode that motorcycle for 20 more years, and never had that repair fail.

I'm a wood turner and find that coffee grounds and thin CA give a more realistic filler. Very strong and helped along with accelerator.

A good, simple and practical way to apply the baking soda is to cut a straw in half, and cut the end at an angle to use it as a tiny spoon, to accurately apply just the right amount precisely where you want it.

Great! Now I know how my manicurist fixes my nails and charges me $70 for Krazy glue and that mysterious white powder.🗽👏🏼

Actually if you fill the dry crack with dry baking soda then add the glue. The baking soda will pull the glue into it and be solid with no air pockets.

Really cool. But I don't understand the whole "Cops don't want you to know" gimmick.

Great video...so true, it's a great thing to know and use. I carry a small brass canister in my truck with baking soda in it. I have it labeled "baking soda for super glue" in case I get pulled over and searched!!

I use CA glue as a wood filler when I repair antique furniture. Thanks for the great vid!

It's 4:49 am and I'm still awake and I just finished watching your video. The chicken noises are funny but ironicaly eerie.

Oh jeez, I was LAPD, and corrections officers might get weird, but if you are using something for work, we know. But if while on the street you offered me a line of baking soda, I might get upset.

superglue needs moisture to dry so if you put super glue on something and dunk it in water or put water on it it will immediately start to harden . so baking soda also absorbs moisture so the baking soda puts moisture into the superglue and the baking soda powder itself makes it more solid of a bond

This stayed recommended on RU-vid for me for about century. Finally played it and was highly disappointed...

They should try this to fill some of these portholes in the city. 🤣

Now I'm going to have to find a new use for all this bailing wire I've been saving.

Cool trick. Had to go back and listen to the outro, funniest thing ever!

I'm a cop and I think it's fine. As a matter of fact, I think that everyone should do this!

Here's an idea. Keep the baking soda in the original box. They make small boxes.

The commercial for this video was about crotch and butt deodorant. It was pretty funny

This works like a charm on hockey stick blade’s. Over time the blade begins to breakdown or feels flexible aka “soft”. Basically the carbon fiber weaves develop little crack’s that make a crunchy noise while manually flexing the blade with your hand. I found that a liberal application of the glue and powder is easily sanded down after it cures so there’s not a lump under the tape. The glue mix also works awesome on area’s on the blade that don’t get taped, especially on the backhand side where the cracks typically start, the bottom where there’s usually no tape as well.

Thanks for another free day buddy! Fooled the police👍

Where was this when I had to repair shipping damage on a plastic lid?! It took a week to build up layers of glue, angling the lid to keep it from dripping, getting glue on other stuff, ugh. Now I want something to glue.... Just because, here's a baking soda tip for tenderizing meat in the kitchen. Make a mixture of baking soda and water, about one teaspoon in a cup of water. Take a pound or so of raw meat like chicken breast, cut into 1 inch cubes and mix with the baking soda water. Let it sit for about ten minutes (less is more, here), then rinse *thoroughly.* Continue with your recipe as usual. It's called velveting and is why meat is tender, even in stir fries. Thanks again for the superglue tip!

I broke a forward grip on one of guns and some this with glue and soda. This works way beyond what i expected . Definitely worth doing .

Carry vinegar to prove the baking soda.

DRYING SUPERGLUE, INSTANTLY can also be done by holding an item that is smoking, up so that the SMOKE comes in contact with the glue. It does cause the glues surface to tint 'white' - but it cures INSTANTANIOUSLY !

Ever since I first saw this video, I use this to to do all sorts of repairs! Great stuff!

Why doesn't the cops want me to know this

Super glue and baking soda are great for repairing the nuts on guitars if they are chipped or cracked.

So what'sup with the cop crap?

Nice share. I worked at a car customizing place years ago. I was just a driver but learned a lot from the techs. Anyway, I watched a tech repair a nasty chip in a corvette with this method.

Most likely wouldn't have watched the video if not for the title...but I'm glad I did. You've earned my like.

Model Glue accelerant works very well hardening superglue instantly. Its awesome mending objects together making it stronger than the original material.

Babe My Engine fell out if my ride. Ahight Babe hold on a second, need to get my super glue and baking soda.

I thought it was going to be about tricking the cops into believing you're not a glue sniffer!!!!😆😜🤪🤯🐿

Just fixed my outboard motors shroud with this trick. Thanks.

Tip #2 That tip was GREAT, dude. Another tip is quickly touch your finger to that puddle, dab it off on a cloth so you don't have a whole ton of it on there, and it erases your fingerprints. For the rest of the day you do not have fingerprints. (Your prison softball story reminded me of some of the practices discussed by the opposing team in the chow hall.)

I have a friend who builds models. He used this all the time to build up a surface in layers and it becomes super strong and sandable.

Coooool! It's like a DIY version of Q-Bond. Also, greatest outro song ever lmao.

I used this method a few months ago to repair a broken plastic fan blade on my car saved me 300$ Thanks!

I heard about this from a friend and he had no explanation on any of it other than it worked so I speculated a little about the properties of baking soda and tried it with cigarette ashes and it worked well with that also so it may be any very finely milled alkaline powder will do just in case you don't have baking soda. I didn't try it with anything else but I'm going to assume other replacement materials with similar properties would also work

If the spot fixed on the o-ring is rock hard... won't it leak at that spot?

I sent this to my brother Bobby, he's always used superglue. 😂 he will love it.

I've used superglue many times along with grenadilla (a black hardwood used for clarinet manufacture) dust to repair cracks and chips in clarinets and also mouthpieces. Works great and the color matches. It's pretty instant as well. So now I'm wondering if I can use this method with baking soda to repair white mouthpieces without being obvious.

God bless you guys man!! I've been on the other side and I can't put into words just how much that means to a man that's incarcerated! After getting out, I've got to go back in

That will come in as a handy tip. Thank you

This is a old school plastic modelers trick. Ive been using this trick for the past 2 decades :) To fix breaks, or modifying plastic model car bodies, frames, even gears in rc car/truck drivetrain. Works great. Any CA Glue with it also works Great. Off course this is only for building material onto surfaces and then shaping to form. For regular bonding of 2 parts, u want to use the glue with a adhesive accelerant spray. Just letting the glue cure on its own doesnt always result in a solid bond. Most people forget to apply pressure equally on both parts for the initial 30 seconds to take advantage of the thermal chemical reaction that takes place when the glue comes into contact with plastic, or other surfaces rated use for, or the application steps are cut short. Any time bonding 2 surfaces, its the contact cement process of application that works the best. Apply glue to both parts wanting to bond, and let it sit briefly for couple seconds (allows for the thermal chemical reaction to get going) and then join the 2 parts together and apply pressure for 20 to 30 seconds. And its solid. If its a clean break on like cracked off or apart, before applying glue, so light sanding with coarse grit sandpaper to scuff the surface, so the glue has various points to bite when it reacts. But yeah i love the baking soda trick. Its my goto for 2 decades and will be my goto, along with adhesive accelerant spray. A must have

I actually knew this one! The King Of Random tested various things to see how they react with Super Glue.

So if you get pulled over with an 8 ball just tell em it's baking soda and you can mix it with super glue to fix stuff. They'll probably let you go because they'll believe that.

The baking soda with CA glue is a good trick that I've used for years, but better for filling a void than joining plastic components together. When you use an accelerator, like baking soda, it creates a fast hard joint, but the joint is so hard that it is far more brittle and likely to snap again if there is any stress or movement.

Yeah,the cops hate it when I combine superglue and baking soda to repair things. One time I got a citation for doing this. Had to go through a whole court process to finally get it dismissed. I walked out of the court room holing my Elmers and Arm and Hammer ,smirking at the cop who cited me. Was a great day.

I'm saving this video to show the police when I get pulled over and have my "baking soda" on me

I don't know why this was suggested but I am very grateful.. Also the Bicarbonate must crosslink the cyanoacrylate monomer. :)

Okay now the cops know! Thanks m8

Short tip and only THE tip! Lmao my brain went sideways.

...yeah, I told the police the same story, "Officer, it's just baking soda", he didn't buy it.

I heard Prison softball and I was like WHAT.... this guy was in prison 👀🤷🤣🤣🤣

Thanks for the tip.

This has nothing to do with "cops dont want you know"

So why exactly don't the cops want us to know about this?

Since I always carry my baking soda in a pill bottle in my purse....I'm in luck.😁

Blowing cigarette over it makes it dry in an instant

I wasn't sure what to expect when this video started I even contemplated leaving and not watching it but then I watched it to its entirety and I thoroughly enjoyed it

I used to date a peofessional musician who would use this same method to repair damaged guitars. He said it was the best as after he fixed the crack or holes whatever that he could sand the area and bring its appearence back to the original look and the instuments sound was true .He swore by the use of this method. Gifting for special events like Birthdays etc.cases of Super glue & boxes of baking soda and he was overjoyed !!!

Very interesting .... I can think of hundreds of uses for this application just off the top of my head. Thanks for taking the time to create and share this with us.

Just wanted to stop by say you and your buddies are good guys thank you for going to the prison playing soccer with the inmates and having Bible study with them

I like how you said " I'll explain it in mechanic terms"

I stumbled on this watching epoxy videos but it helped me with finding away to repair motorbike fenders , I tried finding videos on that a few weeks back and what I found was much dearer methods thanks for the tip

people also use Fine sand or glitter, with super glue it dries and hardens whilst also getting super hot.

a 30 second subject massaged out to 7 minutes.

It wouldn't look so suspicious to cops if you kept the baking soda in the small cardboard box it comes in instead of in an old pill bottle while driving a Honda Civic!