Supercharge Your Fog Machine!

Подписаться 76 тыс.

Просмотров 33 тыс.

50% 1

Getting fog to reach further into your Halloween display can be a challenge, but but adding in a small but powerful fan, you can maximize the amount of fog you're able to move around.
So join me as I build a DIY fog fan for use with my Halloween fog machine.
Gasket template: drive.google.com/file/d/1MDGI...
RCA Lighting system:
• BEHIND THE SCREAMS: DI...
BECOME A SUPPORTER!
Do you enjoy these videos and want to help grow the channel? Consider supporting my channel on Patreon and help me to make even more! / vanoaksprops
OFFICIAL VANOAKS PROPS MERCH:
shop.vanoaksprops.com
MATERIALS:
(Please note: Amazon sellers may change the products sold via these links without notice)
----------------------
Surebonder Cosplay Stick Hot Glue - surebonder.com/search?options...
4 to 5“ ABS duct reducer - amzn.to/3Z7yLqs
5”/120mm 12v Computer Fan (2500 rpm) - amzn.to/3sEoGVH
Wago connectors - amzn.to/3Z8lFJE
12v power supply - amzn.to/3LbrVdB
4” Black Dryer Hose/Ducting - amzn.to/3r9B7sj
LIKE THE MUSIC FROM MY VIDEOS?
www.epidemicsound.com/referra...
INSTAGRAM: @vanoaksprops
FACEBOOK: vanoaksprops
DISCLAIMER: Links included in this description may be affiliate links. If you purchase a product or service via the links provided above I may receive a commission. There is no additional charge to you and it helps to support this channel!
#VanOaksProps

Хобби

Опубликовано:

10 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 76

@TheMichaelStott 10 месяцев назад

Halloween in Australia when it's not Autumn (Fall) is a real problem with fog. The fog comes out at a high temperature anyway, hot air rises faster than cool air so the trick is to use a system that can cool the fog down so it stays low on the ground for longer. This can be done using some flexible tubing you can coil inside a large container, having the tube ends fixed to holes made at the base of the container, sealing them so you can pour in lots of ice in the container and close it. Place the fog machine at one end of the container (It's good to have a heat resistant tube fixed to that end cause the nozzle of your fogger gets hot in case you're like me and didn't know how hot it can get). The fog travels through the coiled up tubing in ice and it gets "Chilled". There's a few plans for this on the net but they are easy to improvise or even improve on😊

@bakerfx4968 10 месяцев назад

Utilize the Bernoulli effect and don’t put the hose adaptor right against your fogger. If there’s room for more air, the low pressure in the tube will pull even more air in and help disperse the fog

@AnthonySherritt 10 месяцев назад

Double this comment! Great build. I will use this.

@JonFlores275 10 месяцев назад

Love this idea! For our display we love low lying fog so not only do we buy Froggy fog juice, but we also have similar garden piping you used in your example. We freeze water bottles the night before and throw 2-3 bottle into the tube and it cools the fog enough to keep it perfectly low. Halfway during the night we replace the frozen bottles, but its easy to do. I know there's other methods using coolers and dry ice, but this one works for our small yard and really makes a difference.

@DayNNyteDJs 10 месяцев назад

Great idea with the water bottles.

@Dave-gm8yn 10 месяцев назад

That's an awesome idea and a very simple fix for a fog distribution problem... I love it.. sometimes the simplest things are the amswer

@brianahawkins8124 10 месяцев назад

Awesome, this will totally help for future Halloween decor.

@Phantom-Halloween 10 месяцев назад

I love your channel so much and I’m so and I’m so inspired by you to the point where I have started making my own garage haunt😄

@VanOaksProps 10 месяцев назад

That is awesome!

@Phantom-Halloween 10 месяцев назад

@@VanOaksProps thank you!

@cem1838 10 месяцев назад

Another useful build. This is really helpful for stage use as well. Thanks. Happy haunting!

@hauntjunkies 8 месяцев назад

We are giving this a try this year!

@HistoricLife 10 месяцев назад

Brilliant!

@jdaywork2693 9 месяцев назад

Nice!

@tylerhair9067 10 месяцев назад

The way I do it is I concocted a setup using 4” corrugated drainage pipe arranged with different exits where I want the fog to come out. Then I pass the fog through a rubbermaid container filled with ice. And I use an old hair dryer at the beginning where the fog comes in to push it along. Had good luck with it last year!

@horses2by 10 месяцев назад

Awesome idea, I think I’ll try doing it this way. Thanks for sharing 🎃💀☠️🎈🧛‍♂️👻

@johnprzybysz3845 8 месяцев назад

If you set the hose or fan a few inches away from the fogger it will draw more air into the tube that will help push the fog through the hose.

@Kyp678 10 месяцев назад

I've seen marine bilge blowers also work with foggers.

@InfamousElGuapo 10 месяцев назад

If you put some frozen water bottles in the tube, it will chill the fog as it passes and give it a low lying fog effect.

@kargandarr 9 месяцев назад

The part that are put together near the beginning of the video including the fan can be used to pull air through an airbrushing paint booth as well.

@propsandvillainy 10 месяцев назад

Damn great idea . Gonna try this for my carbon freezing chamber

@martinlaperriere6155 10 месяцев назад

Thanks!

@VanOaksProps 10 месяцев назад

Thank you!

@snidelywhiplash 10 месяцев назад

I had good luck making a PVC chiller. I used: - 4" x 8-foot pipe - 4" 90° elbow - 4"x2" reducer - 2" tee, with short bit uncapped - And a short length of 2" stock Cut and fit. Spray paint with black Krylon Fusion. Works best concealed in bushes or the like. To use, fill 4" portion with ice or (easiest) frozen 20 oz bottles of water. Put small end *riiight* next to fog machine output and start 'er up. You may have to replace the water bottles a couple times over the course of an evening.

@Chaedron1 10 месяцев назад

I'd love to hear your thoughts on ultra sonic foggers, especially the big ones with 10 heads on them. I've experimented with the single head/disc ultrasonic humidifiers for my indoor plants and they can put out some decent fog which also stays low to the ground. Anyway, I actually bought an AC inline fan by accident thinking it was a regular PC fan and I might use it for this. Though I don't currently own a fogger, that might be a future purchase when I see some sales. Great video as always!

@VanOaksProps 10 месяцев назад

They're cool, but crazy expensive in my limited experience pricing them out. Thanks for watching!

@jeffallen3382 10 месяцев назад

Look up adding a pond mister to your fog machine. It increases the amount of fog and helps it stay low to the ground.

@Craftlngo 10 месяцев назад

There is another thing you could try to keep the fog more compact. I've recently seen a trick by Norm from Adam Savage's channel Tested, where he lead the fog through a piece of open cell foam. The result is a dense fog creeping over the floor. But since he made the test with a micro fogger, I'm not sure if this would work on a larger scale with your fog machine.

@happymaskedguy1943 10 месяцев назад

See you in the fog Van Oaks!

@pablow5549 10 месяцев назад

Great video I couldn’t find the link to the RCA lighting that you talk about. Can you share the video link or the name so I can look for it in the old videos thanks

@VanOaksProps 10 месяцев назад

BEHIND THE SCREAMS: DIY LED Mini Spotlight ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-470rIADIaxA.html

@billbrydon3725 10 месяцев назад

Actually, I like the intermediate setup, since it spreads the fog across a wider area.

@kirkrende3935 7 месяцев назад

Looks like a boat bilge blower.

@memecats5698 9 месяцев назад

I’d be curious to see what it would if you put the fan at the end of your hose.

@brandonvantassel5542 10 месяцев назад

Wow, Ok I think the middle one without the fan Might help make a Fog Screen ??? Like the one you made a video about a Bit Earlier !!

@VanOaksProps 10 месяцев назад

Possibly! Especially if you cap the opposite end of the ducting.

@brandonvantassel5542 10 месяцев назад

@@VanOaksProps heck Yeah !!

@brandonvantassel5542 10 месяцев назад

I have heard if you want your Fog to stay lower you can run the tube through a cooler filled with Ice .

@1969bilbo 10 месяцев назад

Let's get to fogging!

@MikeFarnhamGalaxysEdgeGroup 10 месяцев назад

run the hose through a cooler full of ice it will keep the fog down at ground level.

@keithk2920 9 месяцев назад

seems an inline vent fan would work the same way

@VanOaksProps 9 месяцев назад

Correct.

@kathyhousden2825 10 месяцев назад

Can you do a project using this fan and a fog chiller? I tried doing a fog chiller once before but it was an utter fail.

@VanOaksProps 10 месяцев назад

Maybe some day!

@russmartinez7988 8 месяцев назад

Need a chiller

@jbponzi1 10 месяцев назад

Masonite would be good for the gaskets.

@VanOaksProps 10 месяцев назад

Definitely.

@shanedavis5799 10 месяцев назад

I don't see a need for this in that setup and I didn't notice any real difference in output. I could use this though to help push the fog through my long tubing going through a fog chiller. I may do this.

@VanOaksProps 10 месяцев назад

For clarity this isn't how I would set it up, but rather just shows it's application. 8 feet worth of ducting really doesn't serve much purpose in a haunt setting, however, if you needed to push for 20' this would be a good build to improve fog distribution.

@IAmLusion 10 месяцев назад

The second one without the fan had better spread overall.

@VanOaksProps 10 месяцев назад

It’s because I had to run it 3x as long just to get the fog to exit the ducting. So there was more fog created.

@makitasr 10 месяцев назад

Thank you for the video. Any possibility, you'd be willing the post the STL file for the gasket? I'm making this and am having trouble converting the PDF into something I can upload to the modeling software I use. Or add to your ETSY store. I'd buy the plans. Thank you.

@VanOaksProps 10 месяцев назад

Unfortunately I didn't design it in 3d. Have you tried converting the PDF to an SVG and importing that into your 3d software and then extruding the shape?

@makitasr 10 месяцев назад

@@VanOaksProps Hi, thank you for replying. I really appreciate it. I did try a free PDF to SVG converter and the results were less than stellar. I'm going to try cutting acrylic on my CNC. I'm sure I'll be able to adapt the pattern and make it work. Thank you again.

@jakem3422 8 месяцев назад

What fog machine do you use?

@VanOaksProps 8 месяцев назад

I actually needed to borrow a fog machine for this video. I find them to all be very similar in construction, the real different is output and the amount of space you need to fill.

@rayphillips815 9 месяцев назад

Curious which glue gun that was?

@VanOaksProps 9 месяцев назад

This one: surebonder.com/collections/surebonder-cosplay-glue-tools-and-accessories/products/h-327-specialty-series-high-temperatrue-60-watt-full-size-detail-tip-hot-glue-gun?ref=vanoaksprops

@603VIL 9 месяцев назад

Do you think the gaskets could be 3D printed in PLA?

@VanOaksProps 9 месяцев назад

ABS or PETG would be better since PLA could potentially warp during the warmer times of the year

@603VIL 9 месяцев назад

@VanOaksProps gotcha. Thanks Derek.

@603VIL 9 месяцев назад

Also, does the discharge side of the reducer fit inside the drainage pipe, or is it coupled somehow?

@VanOaksProps 9 месяцев назад

@@603VIL fits right into the ducting. I also found that if you move the fan about 8’ out from the nozzle you get better push. So you’d have the fogger and 8’ of ducting, then the fan, and whatever additional length of ducting. It’s also beneficial to have the ducting about 8-10” from the fogger’s nozzle

@603VIL 9 месяцев назад

@VanOaksProps Got it. So 8-10" gap so that Bernoulli effect works. Then 8 feet of ducting. Then a splice with the reducer fan combo Then, out to the remaining pipe. Sound right?

@JGDeRuvo 10 месяцев назад

Wouldn’t it also help to chill the dog so it hugs the ground?

@VanOaksProps 10 месяцев назад

It absolutely would. This build is more about pushing fog a distance if you have parts of your haunt where the fog won’t reach on its own.

@GaryGreenway 10 месяцев назад

I wonder what the life expectancy of a fog juice saturated fan is?

@VanOaksProps 10 месяцев назад

Great question.

@BlanckMortuary 10 месяцев назад

I built one using left over plywood and dryer vent connections. My builds seem to be: what can I make from this pile of junk.

@celticknyt 9 месяцев назад

Obviously I get the point is to build something, but it seems like you're just creating a weaker version of a bilge fan for a similar price.

@VanOaksProps 9 месяцев назад

I was actually unaware of bilge fans prior to making the video. That said, I'm always for time saving purchases that do a better job than the version I could make.