SuperHandy Wood Chipper Shredder Mulcher Assembley and Given the Test

Подписаться 27 тыс.

Просмотров 31 тыс.

50% 1

The SuperHandy Wood Chipper Shredder Mulcher Ultra Duty 7HP Gas 3 in 1 Multi-Function 3" Inch Max Wood Capacity is assembled and given the test
Checkout my Amazon store---
“As an Amazon Associate I earn from qualifying purchases.”
www.amazon.com...
Want an official Disgruntled Mechanic sticker? just send your mailing address to the email below:
thedisgruntledmechanic@gmail.com
Wanna send me a sticker or other swag? Just send it to the address below.
*****************************************************************
Mailing Address:
The Disgruntled Mechanic
P.O. Box 12
5 E Roosevelt Ave
Elysburg, PA 17824
*****************************************************************
Disclaimer:
BE ADVISED: Any public comment left on THE DISGRUNTLED MECHANIC CHANNEL may get a video response from me rather than a written response. IF YOU ARE NOT COMFORTABLE WITH THIS DO NOT COMMENT!
I am not responsible for any damage anyone does to equipment or themselves from the information contained in the video. If you follow the video and you do stupid shit to you, your equipment, or others it is your fault not the Disgruntled Mechanics! This information is given with the understanding that if you use this information you do so with no liability to the Disgruntled Mechanic or this channel. These videos are for entertainment purposes only! Due to factors beyond the control of the Disgruntled Mechanic, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. the Disgruntled Mechanic assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. the Disgruntled Mechanic recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of the Disgruntled Mechanic, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not the Disgruntled Mechanic.

Опубликовано:

11 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 101

@txsviking 4 года назад

Every time I see a wood chipper Fargo comes to mind. 🤣🤣

@TheDisgruntledMechanic 4 года назад

Ya know Helga said that and never saw it!

@771blahblah 3 года назад

Not thinking of buying one now... thank you so much for this video

@Passionproject100 3 года назад

I bought one a year ago and I absolutely love it even though It is a ton of work to limb everything up, I love love love it.

@GaffGiraffe 2 года назад

I got the single feed 3" unit and it's small but mighty so far. I limb everything before I remove it from the tree if possible. The crotches of the branches is the worst for this one but I started cutting them out with my sawsall and binning them for collection. It is more prep work but with 10 dead full grown hickory trees, 3 mulberry trees and an oak, I needed something 😅

@geyser3445 4 года назад

I had a similar cused hipper a few years ago and it was more effort to feed the branches into the machine than it was worth, so I sold it.

@TheDisgruntledMechanic 4 года назад

If they are very staight and no real limbs works great! HA! Believe me I really debated about just sending it back.

@throttlebottle5906 4 года назад

it's more for old granny to send her hand sheared hedge trimming through lol

@pissedoffpapa2841 3 года назад

Greetings Disgruntled Mechanic from The Pissed Off Papa, After seeing this video I think I am gonna go with a Dr power. Thanx for the heads up brother.

@TheDisgruntledMechanic 3 года назад

My pleasure!

@Boydavie123 3 года назад

I've never seen a chipper work unless its commercial. However i used the side mount hose and slowly fed the leaves in and that worked great. The top feed is stupid. The guard stops leaves completely. the hose attachment works great and the leaves are ground up to powder literally. It's the new year and i'm trying to get it started. I'm sure it will work.

@dmarshall1964 7 месяцев назад

Bigbear Power 5inch chipper you would love it. Blades are always better than the disk. Good Day I know this was 3 years ago but still ones are watching it.

@BigDog50001 4 года назад

Wow Mike that thing looks um.....Super Handy! ;)

@steveross9107 Год назад

I like it. I chopped a lot of cedar where are all curved branches. I did not push it to 3"s. I had plenty of work with just under 3". And honestly, they could have been 3 or very close. I also wish I got the different model without the shredder. The shut would have sent the chips to a better place higher up into a bin instead of so close to the ground. I got mine from Great Circle.

@limeallens6160 3 месяца назад

I can mark this one off my list

@jasonfoster9118 2 года назад

I just ordered one for dead, half rotten limbs. I figured it is weak but I'm just trying to chip up a bunch of old limbs for my garden to build up the soil and mulch around everything.

@AntonioClaudioMichael 3 года назад

Nice looking unit I like the orange

@nathankane8775 3 года назад

I was just about to add one to my cart, I'm glad I saw this video. The way it barely chips wood would make me crazy.

@TheDisgruntledMechanic 3 года назад

Very reason I did the video! This was a real time test.

@nathankane8775 3 года назад

@@TheDisgruntledMechanic I really appreciate it, I have a ton of branches and limbs I want to chip up, it would take forever with that. Not to mention the fact that it keeps stalling. Again, thanks for the vid, you have my sub!

@stoneywilliams1209 2 года назад

Likewise, it’s videos like this that help people decide if a product is right for them. This thing seemed to struggle with the chore it was made to do. Thanks to the uploader!

@getitdonehomerepair 4 года назад

It looks like it will work great on the smaller pieces . I could use one of those yesterday.

@TheDisgruntledMechanic 4 года назад

yeah but it is a slow process!

@cameronpearson5459 10 месяцев назад

I have noticed the blades usually come fairly dull, sharpen first. Additionally, freshly cut oak is going to be one of the hardest wood you can send into one of these bad boys. Just my two cents.

@whodoneit218 9 месяцев назад

Like the first commenter said, you cant just throw the limbs in it! Look at the commecial units. Those actually have a feature that feeds the wood in a little at a time and stops feeding when the engine starts to bog down.

@peterp4876 2 года назад

it is good to see the video and how much work it is to feed the branches in it. The video helped me greatly in making up my mind about buying one. No thanks. I would rather burn the branches in a barrel!!

@jaybartgis5148 2 года назад

I think I'll just rent a dumpster. Lol

@thomasshea4466 9 месяцев назад

Super helpful. Thank you. Just bought this product and quite disappointed so far. Can’t figure out what the top hopper is even there for. It doesn’t work at all.

@mikesworld60 3 года назад

I love a good fire and some marshmellows.

@FvM8 3 месяца назад

😅 Even in the rain had me going.

@AntonioClaudioMichael 3 года назад

Good video mike

@samdavis5079 4 года назад

All the reasons I sold my old MTD chipper and went back to pile it up and get the Burnz-A-Matic out.

@TheDisgruntledMechanic 4 года назад

Yep I hear you on that!

@throttlebottle5906 4 года назад

I prefer the old school wood chipper, load into truck bed and haul to large burn pile. lol unless your doing tree service/major landscaping, a chipper is a waste of time until large commercial size with power feeder. everything else is weak and hand fed, use a 2x4 or 4x4 as a push stick or something else that wont fit all the way down into the cutter head ;)

@TheDisgruntledMechanic 4 года назад

yeah that would help burn all these damn ticks hiding in the leaves around here!

@zoktoberfest 3 года назад

You were shoving in 3" logs like it was a 20 hp commercial machine that professional tree cutters use. You have to go easy with big limbs

@TheDisgruntledMechanic 3 года назад

so now anyone considering buying this chipper knows that it can not be treated like a 20 hp commercial machine that professional tree cutters use!

@MegaSafariman 4 года назад

Seems like it always starts to rain just after you spend an hour getting ready to do work outside in the fall lol

@TheDisgruntledMechanic 4 года назад

Always!

@gabrieljacobs1344 3 года назад

It’ll do 3inch soft woods no problem. Hardwoods need to be shorter branches if they are 3inch.

@wtbm123 4 года назад

Cool

@wyattoneable 4 года назад

I had to laugh at about 12:24 when you overloaded it. Yeah, it didn't like the thick stuff. I know you have a lot of clean up to do so hopefully you can work without the limitations.

@arthurfricchione8119 4 года назад

Mike I have a chipper shredder but maybe you can give me some info. On splitting wood yes I know I need an a a LOl but. What else maybe some. Pointers on sharpening an axe. Just some ideas. I have. A lot of wood. Just had some big ones taken down. Stay well and safe. The next week should be a Dorsey. Might need axe for other things here in LINY. 😊😊😊🇺🇸 Mike you are a pisser needed a good laugh on the initial pull to start 🙏😊😊😊😊

@TheDisgruntledMechanic 4 года назад

Well I have sharpened axes but not that good at it. I do really like my Harbor Freight chain saw sharpener. For the $35 I spent when I bought it many many years ago it is well worth it! Stay safe! Oh and the 1st pull surprised me! Didn't expect it to spin quite that hard as you saw!

@SteveRobReviews 4 года назад

I was just looking into one myself but to go on the back of my tractor .

@TheDisgruntledMechanic 4 года назад

If not for cost I thought od that too.

@SteveRobReviews 4 года назад

@@TheDisgruntledMechanic Ya I know almost $3K so I'll keep burning 🤣

@plants4thewin 3 года назад

Well I guess we will see...I cut down 3 poorly maintained cherry trees on a property I just bought. I put it together tonight and will use it tomorrow. Looks like I will be out there all darn day, LOL...

@TheDisgruntledMechanic 3 года назад

I was pushing oak through it so not sure about cherry. I did notice that it seems to run and chip better as it warms up. If you put something too big in and it stalls just clear the blockage and be sure to choke it when you try to restart it even when warm.

@plants4thewin 3 года назад

@@TheDisgruntledMechanic thank you

@Gideon_Judges6 3 года назад

This looks so similar to the Harbor Freight ones that I have to assume it's a rebrand. Any idea? Does the motor say Predator on it?

@throttlebottle5906 4 года назад

woah, I think you been brainwashed by the hummingbirds, working that fast :)))))

@BrucesShop 4 года назад

I saw you were chewing up oak. That is tough.

@TheDisgruntledMechanic 4 года назад

To be fair yes most of it is oak

@AntonioClaudioMichael 3 года назад

Seems kinda hard to pull start like the compression is super high

@AntonioClaudioMichael 3 года назад

Interesting tool on the channel bro you do videos like me bro new toys on the channel not always automotive

@AntonioClaudioMichael 3 года назад

What is that metal on metal clanking noise I keep hearing when the motor turns off 😳🤔

@ziks3000 2 года назад

The hammer knives for the shredder

@CPthetooladdict 4 года назад

Man you about flung that thing across your shop! Lol I could have used that this year my dad had a troy built that worked pretty good but man that gave you some fits good reviews mike!

@TheDisgruntledMechanic 4 года назад

Yeah wasn't quite expecting that hard of a pull!

@CPthetooladdict 4 года назад

@@TheDisgruntledMechanic well you convinced me you were a beast lol

@TheDisgruntledMechanic 4 года назад

Haha! I may be used but I ain't used up!

@CPthetooladdict 4 года назад

@@TheDisgruntledMechanic love it!!! Lol

@m.m.7511 Год назад

The top is for leaves...lmao

@AntonioClaudioMichael 3 года назад

How you like that Milwaukee 16 inch chainsaw on the floor Mike @The Disgruntled Mechanic

@dipenpujara5170 2 года назад

How did you get it to stop turning around when you first started it? This happens at around 7:56 on the video

@Nuttsy-vy7xh 4 года назад

Based on the size of the limbs and branches you were trying to feed into the machine, you probably would have been better to go to a local equipment rental service and use the $600 + dollars to rent a heavy duty chipper, tow behind the truck, that would handle all that oversized brush you stacked up. Easier on the back and in one day it would be completed.

@TheDisgruntledMechanic 4 года назад

Yep you are correct, sir! When I did this many years ago I think that is exactly what I did!

@larrabeejl 3 года назад

Stop treating it like its a commercial chipper by throwing the big chunks in it. You're supposed to feed it not throw it. This is just a bad example of user error/equipment abuse.

@TheDisgruntledMechanic 3 года назад

If it is a BAD example of abuse it means it was done correctly. If it was a GOOD example of abuse then it would be being abused. You have abused the English langauage more than I abused the chipper! And I am glad to see the wood chipper police is alive and on duty!

@AnnM223 3 года назад

How much oil you need to put in?

@allens9573 2 года назад

So more time has gone by, is it still a decent machine? Im looking at the same one.

@TheDisgruntledMechanic 2 года назад

If you feed it sloooooowly, yes for small stuff.

@MetrologyEngineer 3 года назад

6:54 LOL how's that for compression.

@kirk1907 4 года назад

Maybe it needs a bit more HP Mike

@TheDisgruntledMechanic 4 года назад

Without a doubt!

@HealthSupercharger 3 года назад

yes i am not going to get such small weak machine i need to get stuff done and will go for a 11hp engine and more heavy duty machine.

@brianconnor1810 3 года назад

As you said, you should have bought a wood chipper not a shredder. A wood chipper with a drum rather than a disc would have suited your needs better for limbs. You need to hold the limbs back a few seconds to allow spinning disc to get speed back up.

@bodgitandleggitgarage 4 года назад

1st BOOM

@josephfaraci7849 2 года назад

Your technique for the smaller machines is all wrong! you just don't jam it in there you have to slow feed it! you shouldn't allow that stuff just to build up in the chutes. You're just throwing it in there you have to place it in there, and slowly feed it in- I have a different Shredder than you and it only gave me problems on Hardwood- but it was able to get the job done with a little bogging down because I slow fed it

@TheDisgruntledMechanic 2 года назад

Read comments you will see why I did it this way

@TheDisgruntledMechanic 2 года назад

Read other comments on this subjec and my answer . Not gonna type it again