Surprising results - Two Trees TTS 20 Pro

Подписаться 33 тыс.

Просмотров 13 тыс.

50% 1

Two Trees sent out their latest addition to their line of lasers. The machine is rated at 20 watts and has a work area of 418x418. It does have limit switches to aid in smooth operation. The kit that I was sent contains the air assist and the honeycomb accessories for the machine. The current price at the time of this video is less than $700 with an option for discounts. This is the most affordable laser that I have tested that I could see using in my shop full time.
For templates that I have made, check out my Etsy shop. I build files for projects and tools for laser engravers.
www.etsy.com/s...
For Clack Shack shirts, check out my store:
the-clack-shac...
The links below are affiliate links that will direct you to the product in this video. If you use this link for a purchase, I will receive a commission from the purchase. I remain unbiased and honest in my assessment as always.
TTS 20 pro package with $120 discount-
bit.ly/44qRkap
TTS 20 Pro package on Amazon- amzn.to/446fKGJ
‪@Twotrees3Dofficial‬

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 75

@Twotrees3Dofficial Год назад

We wanted to take a moment to express our sincere gratitude for taking the time to review and share your experience with the Two Trees TTS 20 Pro. Your video provided valuable insights and feedback that will help us improve our product and better serve our customers in the future. We are thrilled to hear that you had a positive experience with the TTS 20 Pro and that it exceeded your expectations. We are constantly striving to create innovative and high-quality products, and your review has inspired us to continue pushing the boundaries of what is possible. As a token of our appreciation, we would like to offer you a special discount on your next purchase with us. Our team member Shay will be sending you an email with more details on how to redeem this offer. Once again, thank you for your support and for sharing your thoughts on the TTS 20 Pro. We look forward to continuing our partnership and delivering exceptional products and service to our customers.

@TheClackShack Год назад

Thanks.. The machine performs really well for the budget.

@warp103 Год назад

I did a video on the tts55. Great machine wish I had the 10 watt to review but still loving the 5.5 watt

@Twotrees3Dofficial Год назад

@@TheClackShack Thank you for your support, I hope we can keep in touch and explore more machines

@Twotrees3Dofficial Год назад

@@warp103 Thank you for creating a video on the TTS55! We're glad to hear that you think it's a great machine. 🙌 While we would have loved for you to review the 10 watt, we're happy to hear that you're still enjoying the 5.5 watt. 😊 If you have any further feedback or questions, please don't hesitate to reach out to us. We appreciate your support!

@ememeable 3 месяца назад

My father also did practice at UCH Ibadan were I was born 1975

@TheClackShack 3 месяца назад

Cool

@ememeable 3 месяца назад

My Chairman Dr Apoki I greet you

@TheClackShack 3 месяца назад

Thanks

@yannick3540 Год назад

Hello. Thank you for sharing your experience with the tts20 pro! I'm going to take it as my first engraver, I was looking at other models, but your test won me the tts20 pro! THANKS😜🤑

@TheClackShack Год назад

I would say that is a good choice from what I have seen so far.

@K40Keller Год назад

Nice one. Got mine today. I will test in some Days. Look really fast. Nice.

@TheClackShack Год назад

It will surprise you.. cuts good too

@Graeme758 7 месяцев назад

Just bought one of these and running material tests with your settings. 3mm mdf on a test grid 3mm/s -10mm/s 80%-100%, all cut through cleanly. 3.6mm Ash face ply, 7.7mm/s at 80% up all cut cleanly, 8.4mm/s cut cleanly at 90% upwards. This will be replacing my K40 for most jobs, so easy to set up and only a little slower. Just use the K40 for acrylic or fast cutting blanks. At £350 it's a steal. (New they are £380, I got one from a You Tube reviewer used just for his review. When the 40w diodes start dropping in price next year I will grab one.

@TheClackShack 7 месяцев назад

It is a good machine for the cost for sure.

@davidanthonybatten9150 6 месяцев назад

Do these machines come with the perforated bed?

@TheClackShack 6 месяцев назад

This one came with a honey comb but not all do

@davidanthonybatten9150 6 месяцев назад

@@TheClackShack Thanks

@davidanthonybatten9150 6 месяцев назад

@@TheClackShack Are they for sale in the UK off the Brand dealer or is it ok to buy elswhere other than direct off them?

@chrisgallaher3899 Год назад

Dave there is an imposter out there posing as you, the give away was he did a test WITHOUT burning your logo LOL

@TheClackShack Год назад

Tryin to mix it up..

@epestela 9 месяцев назад

Hi, thanks for the review. How do you compare the 20w module performance to others like neje e80?

@TheClackShack 9 месяцев назад

Very similar

@epestela 9 месяцев назад

@@TheClackShack thanks. Now I have to decide between a neje with a 10w (for workspace) and this for power. Both for about the same budget (little more if max 4 without chain, little less if max 3). I'm moving up from a small neje 2 with a 3.5w laser (input) to be able to do some cutting and make some toys for my kids ;) Not sure if I need the extra room but the z of the max4 looks interesting ;)

@savvasavva8395 Год назад

The speed is ridiculous. Also, consistent! Amazing, keep up the good work that you do!

@TheClackShack Год назад

Yea, it was surprisingly fast and maintained consistently well

@TheFpc20 Год назад

Wao it is really fast compared to the tt-5.5s that I have, what size can be cut on the included honeycomb? I want to buy this machine next week possible

@TheClackShack Год назад

The usable work are is about 360x360 on the honeycomb

@TheFpc20 Год назад

@TheClackShack excellent, I think that in that case I would have to buy a biggest honeycomb since I would need to use the complete work area that the laser provide, thank you so much!

@dalecarr7881 11 месяцев назад

I see that you home to rhe back left instead of the front left. As i also work in a home-made enclosure, did you have to relocate the end stop to the back? If so, what did you need to do it? Thank you for your time.

@TheClackShack 11 месяцев назад

I set my machines to go to back left after job completion.

@dalecarr7881 11 месяцев назад

@@TheClackShackI never thought of that, so it makes things easier. Thank you.

@AndrewMartynets Год назад

Hi, can it engrave on steel, for example knife blade?

@TheClackShack Год назад

You can mark stainless with or without marking spray. Other metals only with marking spray. You cannot engrave

@warp103 Год назад

lol Funny thing is My video on the tts55. I felt the same way you did at the beginning. After having another 5 watt. The power and speed for the cost had me sold.

@TheClackShack Год назад

Yea, Two trees also sent me a code for $120 off. Unreal..

@warp103 Год назад

@@TheClackShack wow

@rebelmarshall3632 Год назад

Oh, I never thought to use the plastic clips for cars.

@TheClackShack Год назад

Lots of folks using them.. They work

@danielthomas3236 Год назад

If I wanted to mount this to a piece of MDF, about how big would it need to be?

@TheClackShack Год назад

26 inches deep and 24 wide would work and allow about a half inch extra around it.

@danielthomas3236 Год назад

@@TheClackShack Thanks.

@Shawn494949 4 месяца назад

Great video, thanks

@TheClackShack 4 месяца назад

Glad you liked it!

@isaiahgillett2573 Год назад

How robust is the assembly for x and y axis movement?

@TheClackShack Год назад

It is surprisingly sturdy for the weight of the module. No issues even at high speeds.

@warp103 Год назад

if it anything like the 5.5 great and the legs can be 3d printed and there is are extender for the legs

@mariadiflavis7612 8 месяцев назад

How did you get your machine to home?

@TheClackShack 8 месяцев назад

I use lightburn and just hit the home button. Make sure you have the origin set correctly

@arthurtotherow8208 Год назад

Have you ever engraved a pool ball?

@TheClackShack Год назад

I haven’t,, Yet..lol

@JustPlainRob Год назад

Another review dropped today and the guy was getting full cuts on 20mm birch plywood up to 15-20mm/s running a 50%-100% range. I wonder if your original no-air tests sooted the lens and reduced its power going forward? Might be better to test WITH air first, then without air.

@TheClackShack Год назад

If the lens got that dirty, that fast, the machine has big issues. To cut 20mm, it would need multiple passes. It is a good machine but I would need to witness (in person) it cutting 20mm plywood in a single pass at speeds over 15mm. 36 watt machines can't do that.

@shanefoster. 10 месяцев назад

Hey, buddy, I have a question about a 160 round patches off. Amazon, for hats, what is the best way to alarm the tts 20 pro so I can hit the patch every time

@TheClackShack 10 месяцев назад

A jig.. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KVb7spW8_KQ.html

@haleybel Год назад

Hi, I’ve got one of these but I’m not used to lightburn. I’m so used to a co2 it has me confused. How do I do those tests please?

@TheClackShack Год назад

This should help.. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8FGEEacHYkQ.html

@PortlandIn 11 месяцев назад

To install the sd card in the laser should it be on or off? This my first laser.

@TheClackShack 11 месяцев назад

Off is best

@qapla Год назад

For the price, this looks impressive. Are you using Windows with your Lightburn - if not, have you used the Windows recommended software (LaserGRBL)?

@TheClackShack Год назад

Lightburn is a more versatile version of GRBL. I only run lightburn

@qapla Год назад

@@TheClackShack Thanks - are you using it on Windows?

@TerryGuilliams 10 месяцев назад

Would you go with the TS-20 or the TTS-20 Pro?

@TheClackShack 10 месяцев назад

I like the TS20 better, it actually has a usable z-axis. The TTS is cheaper though and is still a good machine.

@mcm0619 9 месяцев назад

hi i’m new to this im looking to buy one of these machines can you please help me with a couple questions? first do you use just a regular lap top to connect to the machine to cut? if not what do you need to get to create your projects on?

@TheClackShack 9 месяцев назад

The lasers require a very basic machine. You will need a windows 10 or so system.

@mcm0619 9 месяцев назад

@@TheClackShackbut a lap top would work??? and is it wireless with bluetooth or do you have to hook the laptop up with a cord???

@TheClackShack 9 месяцев назад

Plan on using USB if you run lightburn@@mcm0619