Survey Stakes and Markers

Подписаться 1,4 млн

Просмотров 342 тыс.

50% 1

I was a little unclear at 2:47 when I say this is 'about' 5 ft away from the wall. No - that pin is EXACTLY 5ft. from where the face of the wall should be.
This is the first video of the storage project Nate is building in Arizona. Nate is EC's son, and the guy who produces the Essential Craftsman videos. We mentioned this project briefly in this video • Why Our Spec House Is ...
As soon as this project is completed (including all videos) we will pick back up on our spec house series. If you are enjoying these videos will you please share with your family and friends!
Amazon Links: (affiliate)
Whiskers amzn.to/2Mloj8Y
Spencer Loggers Tape amzn.to/2t8bKFs
(very handy for layout)
Free Starter Blacksmithing Tool List bit.ly/blacksmithingtools
Free Guide - 100 Tools Every Craftsman Must Have bit.ly/EC100tools
Enjoy EC? Join Essential Craftsman Academy!
essentialcraftsman.com/academy
This is the best way to support Essential Craftsman and you get a LOT of perks as a bonus!
Did you know we have a podcast?
Spotify spoti.fi/39ezy3d
Apple apple.co/33dbrJQ
Stitcher bit.ly/3NWy8sY
RU-vid bit.ly/2n4HCLG
Buy a knife from Cy Swan here: greenvalleyforge.com/
Second Channel (Podcast video, family, misc content) bit.ly/2n4HCLG
If you are going to hire a contractor for a big project PLEASE read our ebook first!
amzn.to/2v6qZ6j
T Shirts, Hoodies, and other Merch: bit.ly/2C7JFRv
Instagram / essentialcr. .
Twitter / ecnatwad
Facebook / essentialcra. .
Like the music? Spotify Playlist Here spoti.fi/3NzAnTg
Amazon Affiliate Links:
Amazon Store amzn.to/2pcUk8G
Makita 18v Impact amzn.to/2R9uamN
4 ft level amzn.to/389qsQa
Utility Knife amzn.to/2RjVRJL
Palm Nailer amzn.to/2LhvTTd
Spencer Tape amzn.to/2EQWxPy
Carpenter Bags amzn.to/2XeBaC1
Belt bit.ly/3MsdijV
Hammer amzn.to/31y4q66
Tape Measure amzn.to/2WYg23Q
Skil Saw amzn.to/2UcQyLi
Video Equipment and Misc.
Main Camera amzn.to/2WG9qSC
Secondary Camera amzn.to/32tS2Vx
Microphone (for narration from office) amzn.to/2WquPnM
Wireless Microphone amzn.to/2IGpNto
Other Wireless Microphone amzn.to/397VmxJ
Tripod amzn.to/2XOJcOd
GoPro amzn.to/3znHgTA
GoPro Tripod amzn.to/3aL8pFH
Battery Bucket amzn.to/3GVR9cV
ActionPacker amzn.to/2l7Msqv
Learn more about Essential Craftsman
essentialcraftsman.com/
Thank you, be safe, and be grateful.

Опубликовано:

11 июн 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 302

@andrewv5104 6 лет назад

If your a surveyor and ever get lost doing a survey. Just pound some lath in the ground and a contractor will show up to knock them over.

@pais4957 2 года назад

This is very accurate man

@ringonor4298 3 месяца назад

😅 so true

@Jesse__H 6 лет назад

Woohoo it begins once again!

@Neii234 6 лет назад

The quality of your content is amazing. Thank you

@Dan4052 Год назад

Wow, is this man well spoken. You don't find a guy like that every day in the field. And knowledgeable. Really appreciated this video. Very helpful. Thank you.

@maxkonta6284 Год назад

You helped me to solve a problem when I'm marking the center of the plumbing fitting with the whiskers, really appreciated Sir.

@herbertreano7951 4 года назад

Cant stop watching this man.. Hes great.. I love it..

@suckerfree23 6 лет назад

I can say that I'm as excited if not more to see this series. I'm a law student, so studying land law was a bit of an abstract subject. It's great to be given a chance to follow real issues in construction, explained by an expert.

@huggy2 6 лет назад

Have a dozer that wont run? Drive a grade stake within 10ft of it and I guarantee it will fire right up just to be able to get the chance to run that stake over!

@jamess662 6 лет назад

Also works for old dump truck drivers...

@Kaptain13Gonzo 6 лет назад

You know it. It's like magic. No need for a mechanic.

@marshallmoneymaker8322 6 лет назад

Actually it's the other way around. Surveyors will watch a 100 dump trucks drive in and out of the same site ALL DAY LONG and put stakes directly in the roadway we are using!

@arkansas1336 6 лет назад

Huggy --- I found during site visits with all equipment operators, have them do 2-3 hours (manual labor) of assisting setting a 1/2 mile of staking which will cut down on "survey destruction". Cheaper than correcting mistakes and they hate having to redo their on work (staking).

@arkansas1336 6 лет назад

Marshall Moneymaker --- I've seen that several times also!

@pendulousphallus 6 лет назад

So happy to be back on site with you, boss. We're designing an industrial steel building in school next year. This sub-series with doubtlessly be instructive to me.

@marcogaray-chavez6512 3 года назад

this man is helping me become a real man

@pangsbricks8412 6 лет назад

Fantastic video! Always ready to see what you show next! Thank you for your awesome content!

@jakeconrad11 4 года назад

Hello Scott and Nate. I just entered the world of industrial carpentry a year and a half in SW Louisiana. Im 33 years old and had little experience in the trade. Thanks to your videos i was able to have the basic knowledge to at least gain the respect of my co workers right off the bat. I stared as a labor and last week i passed my nccer certifications test. I give a lot of the credit to what u guys do. So from the bottom of my heart thank you.

@essentialcraftsman 4 года назад

You are most welcome!!!

@nealneals6515 6 лет назад

Thanks for providing the info, great job in deep diving and explaining.

@4tatonka 6 лет назад

great vid - -- wonderful information for a layman like me. You guys rock! Thanks

@keelerdr 6 лет назад

Great content as always...looking forward to the mini series!

@danbarrett6113 6 лет назад

Just more great never talked about information. Thanks

@judahchadwick6577 6 лет назад

So cool! We have started a new zoo expansion project at the Ark, so survey markers are everywhere. Now I have a grasp of what they mean! I love building, whether it's a personal project, at work, or watching and learning from someone else's project.

@tko6196 9 месяцев назад

Man, I miss this kind of teaching.

@faustesq5854 4 года назад

Superb work. Thanks for sharing.

@aaronr3637 6 лет назад

Looking forward to the series!

@priceb713 6 лет назад

Loving the storage videos already! Give us lots instead of just a few!!!

@gentbar7296 5 лет назад

so glad added this series... greetings from glendale

@johnhunter273 6 лет назад

Great information! Thanks for sharing!

@michaelroberson2546 6 лет назад

Welcome back to Arizona!!! June/July is likely not the most welcoming weather to visit, but things gotta be built. Stay safe and hydrated my friend.

@SchmackyJoel 6 лет назад

We do our offset symbols a little differently at my survey company in Kansas, but otherwise it's all just about the same. Also, 0.75' is 9 inches, so going 9 inches off of F +0.72 will put you 3 eighths of an inch too high. Hundredths to eighths is close, but I recommend counting from quarters of a foot. I mean, 0.25, 0.5, and 0.75 are respectively 3, 6, and 9 inches then go up or down from there based on the hundredths shown on the survey stake.

@leerhill 4 года назад

SchmackyJoel you wouldn’t happen to work for the survey company in the burgundy Chevy trucks??

@franciscojavier4670 4 года назад

That’s what I was going to said

@kimberlygregory111 3 года назад

agreed

@pais4957 2 года назад

Happen to work for kaw Valley Engineering?

@paveldimov8971 2 года назад

@@jabaristevens388 I actually think he's right and it will be 3/8 high..

@sterlingsilver5937 4 года назад

Thank you! I think this video will help me and I seek to grow in the construction industry.

@martylts 6 лет назад

Fabulous video hoping to do a similar project in the future

@casycasy5199 6 лет назад

you did it again great video

@smartgorilla 6 лет назад

Great work. I wish I was out all day. Better than being stuck at my desk.

@davidskeeterskeeter1835 6 лет назад

Take care fella,,your a top top man,,all my respect all the way from England, 👍👍👍👌🇬🇧

@patrickhance7348 6 лет назад

Marker's are very important goodwan nate.pat from Belgium 🔨👊

@1320fastback 6 лет назад

They just surveyed my job for curbs and intersections to be poured. There must of been 30 stakes I had to navigate with 57' trusses hanging off my forklift. After two days I did not hit ONE! This morning the concrete company showed up to start setting curb forms and plowed 4 of them down just driving into the job.

@bogilbert6265 6 лет назад

Every video you guys post is great this will be fun to watch but get it done ASAP, we have a home to build. Just playin love the content!!

@ia7277 2 года назад

Very well done

@tradedossier 2 года назад

Great information!

@will87463 6 лет назад

Great info as always. Also, if you want to sound official, the stakes are called lath! Looking forward to the spec house series!

@russellthomas9249 Год назад

lath is 4 foot stake is 2 foot

@RealLuckless 6 лет назад

A worse mistake than being a little off side from a property line that you can make as a contractor: Getting started on the entirely wrong lot... One of my father's friends hired a contractor in New Brunswick more than a decade ago to put up a pre-fab cabin kit for him. Customer comes back from being out of the country to go to their new vacation home, and find it was accidentally built on the wrong side of the road in a new lake front sub division. Needless to say there were some awkward conversations on how to fix things.

@user-qe4mg6gi1d 6 лет назад

Lol, I can imagine how hot the conservations must’ve been.

@jaxturner7288 6 лет назад

RealLuckless Jesus, you’d think with permits and inspectors, someone would of noticed even if the contractor was an idiot, anybody coming to the job site address could of easily figured out its the wrong side of a road. Kind of fishy tale honestly.

@OtherTheDave 6 лет назад

Jax Turner It happens from time to time. Google “house demolished by mistake” some time when you’re bored.

@RealLuckless 6 лет назад

Jax Turner the problem was apparently due to a mix up between the company that subdivided the large property and built the road, and the provincial governments address scheme. Guy's property was one of the lots in the middle of the road (in a very rural area. No idea if any inspection was really needed or done there. I'm rather vague on cabin regs back there at this point.) The guys who had the road built and parcelled up the land numbered the lots the opposite from the provincial standard at the time. This was corrected before the contractors came along, but not before the new land owner was told the old numbering scheme for his address... Contractors come along, "get help" from the guys who sold the property and failed to notice the missmatch, and two weeks later the lot has been thinned of trees and a spiffy new cabin is standing there on the wrong side of the road... Lots of back and forth eventually ended in the owner of the cabins property deciding they liked it, then paid the contractor to build a replacement cabin on the correct lot in exchange. And I assume everyone said sorry to each other an excessive amount, because this is Canada and we're weird like that.

@JerryWick 6 лет назад

Wow, just Wow. No other words lol

@montiraruba2831 2 года назад

I stumbled across this video. Great video. I am looking forward to following the next videos. I subscribed.

@ActiveAtom 6 лет назад

I have a whisker out front of my house they are installing sewage lines and I wondered what those are. Thank you for the video I know also know what some of the writing on the those stacks are telling the contractors.

@repairdrive 6 лет назад

Man I love this stuff 😊😊😊

@joeholmberg250 5 лет назад

Very interesting information.

@OldBrownDog 3 года назад

Same with planting trees and bushes it's good to be able to walk around them and still be on your property

@frostcb2 6 лет назад

I’m a Carpender and I set up survey for excavators and I use a linker survey rod. It’s great for getting compound slopes and it really easy once you have your laser set up. That Rod you also use tenths.

@russellthomas9249 Год назад

if you need to cut a slope at 1 1/2 to one down 25 feet to your toe of slope , I guess you have a LONG rod.

@justaguy427 6 лет назад

Welcome to Arizona!

@rwkayser 6 лет назад

Initially I guessed you were in your old stomping ground of Las Vegas.. Then, thought Palm Springs? But, alas... you were in Mesa. You do get around Obi Wan Scotty. Thanks again for the quick and educational brief.

@hugozavala33 6 лет назад

great info! tnx!

@thevikingcarpenter6721 6 лет назад

Great video also real nice hammer you have there.

@travisjicorcoran5870 6 лет назад

Had a surveyor in a week ago - first time I've ever employed one. Had him drive both pins and offset pins, then had an excavator pull some boulders from various places on my farm and drop them right atop the pins...then had surveyor come back (yesterday!) and use offset pins to locate and create final pins atop the boulders. Next step: rent a mini excavator to build a stone wall between the boulders that mark the inflection points in the zig zagging property lines. The whole process has been fascinating...and, yes each step looked IDENTICAL to the bits in this video. Excellent as always, thanks!

@andrewalexander9492 6 лет назад

Hmm, sounds like you're placing half of your boulders on your neighbor's property. Do you have an agreement with your neighbors to do that?

@travisjicorcoran5870 6 лет назад

Andrew Alexander yes. Also, I believe that most New England states have laws re traditional style boundary walls. Finally, I'm in farm country, so no one gets upset when rocks take up 100 square feet of a 50 acre farm. 😉

@hugozavala33 6 лет назад

great info! thank you

@ricdenali4213 6 лет назад

Very interesting video.

@63256325N 6 лет назад

I talked with an older fellow years ago that used to lay out state highways. He constantly struggled with teenagers running over his grade stakes with their cars, so to combat that he'd balance a small rock on the stakes thus taking out the windshields of said offenders. Don't know just how true the story was but sitting around the fire swilling beer it made for a good laugh. Thanks for the videos and hope to see more of the Arizona project.

@russellthomas9249 Год назад

if kids ran over my grage stakes L would pound a 12-inch piece of rebar next to my stake and look for a guy changing a tire

@shawnbixby1 6 лет назад

Great content thanks!

@JerichoRally 4 года назад

Awesome! Thank you!

@kengamble8595 6 лет назад

"Going" to get hot !? This must have been made a few months ago, I live here and it was 110 today! 😊 Thanks for sharing and take care. 👍

@nothere7198 6 лет назад

But it's a dry heat ;-) (I'm guessing he shot the video a bit ago ?)

@kengamble8595 6 лет назад

Essential Craftsman I'm closer to Yuma, so we're a few degrees warmer most of the time. At least the nights are still cool, for a short time anyway ! 😊

@hunter3583 6 лет назад

every one likes to say "but it's a dry heat" they obviously haven't been here july through september it's nothing like the midwest but 110 with 60-80% humidity during the monsoons is hell

@jasonmohning1708 5 лет назад

hunter3583 - Gotta love that feeling of being in a pressure cooker while being pelted by palo verde beetles July- September. Regarding a dry heat, I like responding with "So is the surface of the sun."

@jackielinde7568 4 года назад

July and August are the hot months of the year. June is "just warming up" month. ;) Yah 120 Deg F Temps (~49 Deg C for you non-US People.)

@frostcb2 6 лет назад

Very important to follow the survey is the foundation for all the other trades that are coming in. Carpender’s build America

@CHIEFDIG 5 лет назад

Thank you 👍

@ibarbarian0 6 лет назад

When I was a little kid those stakes made great swords. Adult me wants to smack kids that were like me growing up.

@nothere7198 6 лет назад

Thumbs up for shared guilt... EN GARDE ! :-)

@rstewardson4164 6 лет назад

Many years ago my family moved into a housing tract still being developed. A surveyor working there called me over, took out a piece of lath and tied several pieces of surveying tape to it, giving it to me. Saying ‘that was for me and all those in the ground were his’.

@jonhare392 6 лет назад

When the 5 freeway was being built in my backyard my brother and cousins and I took out stakes and pounded them back in about ten feet off and lower. My Grandfather was a paving general superintendent and used to take us grandkids out to the job on Friday during the summer to ride the Barber Greene pavers and rollers. We knew that if you threw away the stake it was easily replaced. So when you pass the La Costa exit and hit a dip you'll know we were little assholes. If grandpa had found out he would have killed us.

@hea-libertyhawk3418 5 лет назад

Jon Hare - ok … now that was funny!!!!

@andrewvigil3313 3 года назад

Jon hare, if you used to play around the 52 that would explain a lot

@arkansas1336 6 лет назад

Great explanation, 'spot on!' ….13

@otherstuffbybob 6 лет назад

Thanks for the info

@treverroberts3751 Год назад

Good video thanks sir

@integritysurveyingltd1833 5 лет назад

great channel

@TheEarthwinders 6 лет назад

It might be helpful to revisit this issue when there are actually some cuts and fills taking place, so that we can look at the stakes and see the work that's been done, and the correlation between the two.

@thoi412 6 лет назад

I wish this video existed 7 years ago... A trick I learned while flagging proposed gas lines, if the ground if too hard/frozen for your flag's wire to slide in, lay your flag on the ground so that an inch or so if the end of the wire is where you want the flag to end up. Then, using a dull large flat-head screwdriver and a mallet, pound the flag in striking the wire where you want the flag to stick up at. Do this enough times and your screwdriver will develop a divit in the center that helps with repeatability. Sincerely a former gas company engineer

@masteryoda8829 2 года назад

Smart advice

@mxcollin95 6 лет назад

Interesting! 👍

@grinddaily2582 2 года назад

So smart I'm jealous

@matthewhall5571 6 лет назад

Last time I was this early, I had to survey it myself with a laser measure!

@jaxturner7288 6 лет назад

Matthew Hall you surveyed with a laser level? Impressive

@aserta 6 лет назад

Did you set the bubble right?

@ozzy2753 6 лет назад

Must be awesome

@johnleven8907 2 года назад

Although I've come across quite a bunch of you good folks throughout my life, I've never set foot in the US. Still so, the American way of doing most anything has always sounded like the most sensible way of doing things to me. How you guys got stuck with the Imperial measuring system, however, is beyond me.

@lint2023 6 лет назад

So very interesting. I'll never look at a construction site the same. I might even wander through trying to interpret the language and possibly get run off because I'm there! Great stuff. I'm in PHX. Would love to see the project but I don't expect the location to be disclosed.

@russellthomas9249 Год назад

to see it done correct and fast find a union job

@operationhotshotinc.6887 4 года назад

Looking forward to move videos

@stevehansen5389 6 лет назад

When I saw those palms in the background my first thought was "South Oregon." When a block wall is built with one face on the property line does the footing extend into the neighbor's property?

@katdeskinner 10 месяцев назад

After reviewing your video on the markings of the stake, he said it was a 5 foot offset to the face of the wall. But everything is referenced from the street side so that would be the face from the street. Then you would subtract 8 inches to the back of the wall which would be closer to the stake.

@scruffy6151 6 лет назад

Thank you Scott always good information.

@beauwebb1143 6 лет назад

I was doing a farm survey. Papers said monument was a cut X in rock. We found a three pound rock with an X. Survey from a hundred years ago.

@jamesedwards1528 6 лет назад

Now that's all good things I did not know

@davidwaytwolong5369 6 лет назад

thanks awesome

@aBrotherMark 6 лет назад

Scott, seeing you seem to be make a bit more videos now if you don't mind me asking how is your mother? Praying for all of you. : )

@brianpearl7504 2 года назад

Poetic, every time he talks

@ringerson4x4 6 лет назад

Here in my town in southern Maine we have minimum setbacks from property lines, 50ft from front and sides and 75ft from the back. Our lot sizes are probably considerably larger than what you are dealing with in Arizona, 2.5 acres is minimum here so I had to get a variance from my town to build on my 2.37 acre parcel. Our setbacks make it pretty hard to build on someone else's property, but it still happens, usually when a land owner doesn't hire a surveyor.

@russellthomas9249 Год назад

if you build and don't know where your property corners are you are an idoit

@rogerbosman2126 6 лет назад

"The conversion is really easy" lmao

@nothere7198 6 лет назад

It's not too bad really, multiply by .12 (12 inches in a foot) for inches. Decimal inches of course ;-) Then if your tape isn't in decimal inches, convert to 1/8ths by... yeah, ok, so, look, it's close enough ! Go dig over there ! lol

@kimberlygregory111 3 года назад

tell that to the operaters

@trunkshvac3339 6 лет назад

Looking forward to seeing progress fellas! May have missed a video somewhere but what exactly is going up in AZ? Be well and to good guys.

@andyjohnson4641 5 лет назад

Pretty good video! Some of that is regional standards, but as a surveyor that’s staked out hundreds of buildings and uncounted miles of curb and road, I had no trouble following. And yes 9 inches is 0.75’. Just divide by 12. Surveyors use feet and decimals (to the 1/100 of a foot). Architects use fractions of an inch. Now that’s confusing!

@russellthomas9249 Год назад

so do operating engineers (union)

@ErikVonderscheer 10 месяцев назад

@@russellthomas9249union surveyors are in the operating engineers.

@paulkelly1702 6 лет назад

Well, hello Scott from Buckeye! 110 today - hotter will come :)

@reymurguia9798 5 лет назад

Right onn

@steveg5576 6 лет назад

Hope you will explain how the equip operator gets to the desired grade. Today I saw a vert bar attached to the bucket of a D10 I guess it was ? Then there is the small site level the operator uses ? How does all this work ? I took a 1 day surveying class mostly about transit level use and cut / fill. Any insight on the rest would be great.

@fleastomper 6 лет назад

Scott - Out of curiosity, how does contractor licensing work when you jump from Oregon to Arizona? I would assume that either you or Nate would have to have a license for any commercial work you do, but I am wondering if either Arizona has a reciprocation agreement for contractors or if, in the case of Nate's property, a license is needed at all? In the area of Texas where I live a property owner can get away with doing some work on their property without getting a licensed contractor/plumber/electrician, as long as they are doing the work personally. Although, given the scale of the project you are discussing, I don't think this job would quite meet those requirements. Also, when building retaining walls in Oregon or Arizona, what height requirement triggers the necessity of getting an engineer's design and stamp of approval. In my area anything over four feet must be an engineered wall - although given homeowners insurance here doesn't cover damage from retaining wall failures, we went ahead and got ours signed off on anyway.

@gentbar7296 5 лет назад

good take out in cali thats all we deal with.

@jeezusjr 6 лет назад

Neat! How about your tools? Did you drive the truck from Oregon to AZ? Can't imagine how much that would cost in fuel!

@tacocat8867 3 года назад

In most states, that corner on the fence cross beam is illegal, at the very least, no conforming to local statutes defined by minimum technical standards of monumentation. It should have been off set along the property line.

@sb2261 3 года назад

Yeah my thought as well. Do an O/S.

@grumpus1403 2 года назад

Ok, I’ve been enjoying your channel for some time now and I’ve got to wonder about your reasoning on the suspenders? I know if I’m looking for the “first sergeant” on a job site and I see the guy with the suspenders, chances are I’ve found him. Appreciate your channel. Yours and “See Jane Drill” are my favorites.

@johnwildermuth3136 6 лет назад

When I was rent-a-copping at a development in the very early stages, I found the owner's toddler pulling out surveyor's stakes while the owner was in an air conditioned tent, schmoozing with buyers.

@mlhm5 6 лет назад

A video about the need to hire a surveyor. Who wouldn't?

@SuperAWaC 6 лет назад

don't forget easements! utility companies (although more usually their subcontractors) will more than happily wreck anything they need to in order to get at their stuff, at your expense.

@willie9397 3 года назад

Anyone else think it would be funny to go move the stakes around after the surveyors go home, watched the whole video and no it wouldn't be that funny

@badger31738 3 месяца назад

When a surveyor places wooden stakes between corners of property. Do they place the underground markers between corners also?

@Enispecialist 6 лет назад

Wished there was some time lapse of you staking the property. Just watching a pro working is almost as interesting as the info sometimes.

@BrianBriCurInTheOC 6 лет назад

Let’s build a house!!! Wait that looks Like SoCalif Desert not Oregon... It’s worse, Az!

@pangsbricks8412 6 лет назад

Yeah it does! :D

@juliesotelo3771 6 лет назад

Maricopa county in the summer 🔥

@covenantcontracting3815 6 лет назад

Years ago before I was self employed a contractor I worked for built a cabin on a parcel of land that didn't belong to the customer. The parcels in question were very remote and all of the surrounding terrain looked the same. So the owner instructed where to build it and it was built. Later (several months) the rightful owner of the parcel shows up to see a beautiful cabin sitting on his property. The customer mistaked the neighbors parcel as his own. They eventually just traded parcels and the customer paid all the fees for the paperwork. It could have ended up worse. Fast forward a couple years and the same contractor built a new house on another parcel to find out that part of it was on the neighbors property. Fortunately the brother of the customer owned that parcel. So they made some kind of deal. From witnessing these mistakes I always pull county records on every project I build and verify myself that we are on the correct piece of land and have achieved proper offsets from property lines!

@richardmasters672 6 лет назад

Go to sleep! You have to build things tomorrow :)

@Tyler-mm9cj Месяц назад

So are those nails set at design grade with whiskers when the existing ground is already pretty close to existing grade? I know with some of the stakes I've seen the nail was set at existing grade so that the crews would have a clear datum to apply the cut or fill to. This was typically during rough grading.