Suspension Change on Benelli Imperiale 400 

Absolutely, I'm deadset on changing the shocks after the bike refusing to lean on a busy highway, glad I did!

Thanks bud, checked the slacks and it was fine.

@@littlebigadventure3076 👍

whats a chain slack

@@soren5801 The looseness or tightness of the drive chain. The same happens when you change sprocket size.

It looks great but I won't recommend, its 5.00 size and its so big its rubbing the fender.

Hi bro , it’s no brand I ordered from taobao, if you really want a brand , you can look for JSMT suspension. It’s quite a bit of upgrade compare to stock , preload and rebound adjustable

It's bolted onto the rear frame and the rear fender, use a hex screw to remove all the bolts and you'll slide it off.

Hello, the name is really OEM, called ISMT, its 315mm and has adjustable rebound.

Hey there, its 5.00 x 18inch , its wayyy to big for this suspension. Rubbing fenders makes me sad.

Just standard "medium" height handlebar I got from online.

Hello, the name is called ISMT, very China, its 315mm and has adjustable rebound.

Hey, the shocks are 310mm, original is 345mm, my last shock as shown in the video are about 315mm, it's dead due to the weight of the bike, it's not fit for duty.

@@littlebigadventure3076 Right. Thank you very much.

Use your hips to jack up the bike from side position, don't try to use your arm to straighten the bike from the handlebar, I twisted my wrist that way.

@@littlebigadventure3076 hey sorry i meant using the "Center stand".. my bad haha

Haha , use your body weight to stand on the stand peg, then jack it while pulling the bike from the rear handlebar, not the front handlebar.

@@littlebigadventure3076 yes, still my 60kg body couldnt lift it hahaha

Just have some practice, it's more about the technique than brute force , remember to make sure both the peg is on the ground, if it's only 1 peg touching, it's going to be extra hard to lift it.

Hey there, just a black handlebar I got that is higher than the stock one. Its quite easy to install so try it out!

Hey there, its xinqi retro , works ok , not very confident on the bends, but looks real good. Will change to proper tyre on next change.

Hi bro , it’s no brand I ordered from taobao, if you really want a brand , you can look for JSMT suspension. It’s quite a bit of upgrade compare to stock , preload and rebound adjustable

amortyzatory zmienił ponieważ były zepsute, nie amortyzowały.

It's a universal exhaust pipe, "megaphone" if you need the keyword.

Thanks bud, it also shave like 4kg from stock, good upgrade for anyone. The stock pea shooter while looks nice its too big for the sleek looking bike. Yuck

It's a chinese tyre, not recommended as its too thick and eats the fender.