Hope this will make your project go little smoother. Thanks for watching and please subscribe to help my channel grow. Good luck and keep on doing your own work !!!
I don’t know if it is said in the reactions but the leaking of gasoline out of the hose is a problem of the fuel stop/tap. These tend to break and is easy to change. There are revision sets for that.
Thanks a lot. This was exactly what I needed. My carburetor rinses gasoline into the engine. So I want to check the needle valve and o-rings. (for sure I also need to replace my fuel tap which is broken)
Never use steel wire inside carbs and jets, you will get marks in this micro tubes that will disturb gasflow, it's very important they are smooth inside
Thanks for the vid 👍Did you find the over fueling problem was from the fuel pump/petcock being faulty (which is why you had to put a bolt in the fuel hose @ 3:38)?
I don't know why. I take out carburetor on my gsxr 750 97 and I see gasoline inside in valve. Same body can help me. The bike was parking for 3 or 4 years.
Most likely the reason why you see gasoline inside the intake manifold is because the carburetors flooded. On some motorcycles when carburetors flood the fuel is running out to the ground on some motorcycles it floods inside the engine... many times you have to change the oil because it has gasoline inside it and sometimes the engine won't even turn over until you take the spark plugs out because the fuel is stopping the Piston from moving up ... once you rebuild your carburetors change the oil and spark plugs you should be okay... Thank you for watching my video and please subscribe it will help me out 😊