Suzuki Samurai Sidekick Tracker Differentials 101

Подписаться 6 тыс.

Просмотров 5 тыс.

50% 1

Click the link below to find our Super Cradle Giveaway Video!
• Video 🔗
Http://www.xtremezukso... sponsored this video
Richard Smith 1 (813) 610-7706
1986-1995 Suzuki Samurai ring and pinion 3:73 (yes I know I called them 3:57 by mistake)
Aftermarket aring and oinions made specific’lynfor Samurai carriers
4:57
5:38
1989.5-1990, 1991-1998, 1999-2004 Sidekick Tracker Suzuki built ring and pinions
4:30s from cars with auto trans
4:60s “ “ “ “
5:12s from cars with manyl trans
Various rear and front differential housings. Some front carriers can not be crossed drilled 1996+ To put in a 4 pin carrier use an earlier version of front ring gear carrier.
Link to pin retainer/spacer kit
www.zuksoffroa...
Link to SUMO differential rebuild kit
www.zuksoffroa...

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 43

@ken85225 10 месяцев назад

Hi Myron----This is ZUK....originally out of Chandler AZ and recently moved up here to Prescott (God's country). I had a 1990 Sami and became very familiar with it.....lots of modding was done to it....modding back in 1990 was basically a leaf over axle front with a shackle reversal, a little bigger tire, Nerf bars, and make some steel bumpers. That was modding :) The Toyota 8" ...swap the entire axle housing under the Sami....is probably the greatest mod for all around driveline strength👌👌👌👌👌

@rogerbutch783 10 месяцев назад

Yes Richard and Cody are great they are working on mine right now. I drove 8 hrs to get mine to them. And you are also awesome, I love your videos and you are very knowledgeable on these vehicals. Love it.

@Zuksoffroad 10 месяцев назад

Yes they are! Thank you

@ultra4suzukisamurai679 10 месяцев назад

I built my own hybrid front housing, fun project. I wish you could buy new knuckle balls.

@sjdnews1791 10 месяцев назад

Richard is awesome and so are you sir.

@heathkill4821 10 месяцев назад

I run a hybrd rear with a tracker/sidekick center with samurai axles tubes welded in and 5.12 gears so i dont blow rear ends as often, and i dont need two front, i can run a front and rear

@Zuksoffroad 10 месяцев назад

Yes sir, sounds like a discontinued hybrid axle from trailtough. We made some changes to stronger larger OD bearing cups and DOM tube. We call it the rock breaker. Zuksoffroad also makes a hybrid using a rear large sidekick differential offset steering axle, whew that’s a long sentence.

@heathkill4821 10 месяцев назад

@@Zuksoffroad we made the rear end years ago, i never thought about doing the front. We usually go toyota, but i wanted to keep this sami small and geared on propane so it doesnt break. Right now im running a set of 27 inch super swamper mtb and its like a rally car. I like to run 31’s usually unless i go yota. I love your videos, its nice to see others that really dive into these diamond in the rough😎🤘

@ridgwalkerg 4 месяца назад

Its stronger to use lower diff gears aswell, compared to lower case gears. Less stress is above the gears/diffs that are lowered.. something to mention my 6.5 gear case puts more stress on my ujoints then lower gears will

@ajfisher2136 4 месяца назад

Very good information, thank you. My front housing pinion did not come with a shim and my contact pattern shows that it needs more pinion depth. Bearings are all new. Backlash and preload are in spec (using solid pinion spacers)- any pointers on starting shim thickness? Also note I have the stock gearset. Thanks.

@Zuksoffroad 4 месяца назад

The shim you want is under the old pinion bearing. That’s gonna get you near perfect for your pattern.

@HomesteadOC 2 месяца назад

Does the carrier from the rear fit in the front axle on the 99+ tracker vitaras? Im going to the junk yard later this week and ive found a few v6 trackers and GVs i want to check out. Neither are 4x4, but from what im getting from the video is that I can use the rear carrier with the 3 pin set up inside the front?

@Zuksoffroad Месяц назад

No sir fronts are 7” rears are 7.5” I do make hybrid solid axles using rear dif housings so the pinions are bigger and stronger.

@copethehagen 10 месяцев назад

You were talking about samurai gears and running large 34+ inch tires. What is the largest size you are comfortable running on samurai axles?

@Zuksoffroad 10 месяцев назад

Stock front 22 spline front axle with 4:16 gears will go up to 235 tire Chromo front stock rears with gears in t-case OR even better stronger set up is 4s in t-case and axles up to 33” tire that’s for wheeling. For show only-never leave pavement 35” on stock axles is doable in only good weather conditions.

@johntorres6185 10 месяцев назад

Walk around on the red samurai in the back

@Zuksoffroad 10 месяцев назад

Thats Judds Sami. He is passionate about the Samurai and his shows. Here for engine freshen up after turbo attempt. I will have to ask him to show it off. Sans engine.

@CTMadModz 7 месяцев назад

That’s a lot of good info. My 16v swapped samurai has a 6.5 transfer case gear, with 4.30 gears and 35’s. I can currently run 62-65 mph down the highway at 4500 rpm’s but wish I could run 70 mph. What gear ratio combo would you recommend to get it a little better highway speed?

@Zuksoffroad 7 месяцев назад

4:9

@CTMadModz 7 месяцев назад

@@Zuksoffroad that’s exactly what I was thinking, thanks Myron

@HomesteadOC 2 месяца назад

Ive got a 39C code painted in big bold letters on my rear differential with a smaller 233 painted perpendicular and under the 39C. I was told the number is your ring gear count, but i dont know how to find out the ratio with that info.

@Zuksoffroad 2 месяца назад

I don’t have access to old dealer records. Pull it and count teeth is what everyone is gonna tell you to do.

@HomesteadOC 2 месяца назад

@@Zuksoffroad ⁠i actually think i just figured it out. 39 teeth on the ring gear divided by 8 on the pinion is a 4.875 ratio. Also confirmed by the HC8 code in the glovebox. So i think I have 4.875 gears instead of the 4.62 in my 2000 2dr soft top 4x4 2.0L tracker. Does this make sense? It was built in Canada by Cami Automotive in 6/00 if that makes a difference. Thanks for making this video, lots if great info here without any BS.

@Zuksoffroad 2 месяца назад

⁠I haven’t run into 4.8 ring and pinions in any of these cars yet. Anything is possible with Suzuki. They have been known to throw what they have into different models. Math doesn’t lie.

@HomesteadOC 2 месяца назад

@@ZuksoffroadI planned on doing the hybrid swap with a locker eventually for my front air actuated diff. I’ll definitely be counting them then just to make sure.

@braydenballantyne9309 Месяц назад

@@HomesteadOCyeah I found some 4.8s that was in a Suzuki grand Vitara. Which is the facelift 2000s model.

@JohnSmith-mk8hz 5 месяцев назад

I have a bone stock '88 Samurai. The rear diff has been slowly getting louder, to the point I'm not wanting to drive it. I won't have time to rebuild it for a couple months. Is it safe remove the rear drive shaft and drive in 4 high on the front axle? It would be easy street driving, rarely over 35mph and never over 45mph, maybe once or twice a week for about 20 miles or so per trip.

@Zuksoffroad 5 месяцев назад

No this car was not designed to do front wheel drive only for any speeds above 30mph. The car will shake and make strange noises

@braydenballantyne9309 Месяц назад

@@ZuksoffroadI drove 3 hours on front driveshaft and fwd at 100kmh 60mph in my sj70 tin top no noises vibrations at all and the driveshaft was very worn out with no grease. No damage either

@Zuksoffroad Месяц назад

@@braydenballantyne9309clarification stock models are better at fwd. highly modified Samurai not so much.

@garyking9908 10 месяцев назад

Good stuff! I want to upgrade my axles and toyotas arnt cheep

@Zuksoffroad 10 месяцев назад

Starts with tire size then gearing then front chromos then front Locker/Power steering. Tougher more capable samurai

@michaelantonio1367 9 месяцев назад

Almost more confused than before I watched. Just to be clear you prefer to do a rear diff swop to the front and run samurai components right? I have an 87 sami that at some point I will upgrade the suspension and would like to do axles and lockers as well. Trying to put a complete game plan together firstly.

@Zuksoffroad 8 месяцев назад

Almost got it. I prefer 26 spline side gears in a front samurai with chromo axles locker and ps. Makes for an almost unstoppable set up. Rear difs have been run every mile showing in the odometer. Fronts are always in better condition because they only run when engaged. The 22 spline front axles are just too weak for any serious size tire.

@michaelantonio1367 8 месяцев назад

Thanks for the response . I own two sami's one is Tuki a fully custom crawler its a beast running FJ front custom rear all toyo axles on 37". Then I have a mostly OG 88 with the 1.3 that needs a new suspension and lockers....I purchased Tuki already built by a guy named Rick but want to do the work on little Sami myself. just want to map out a plan. I'm only looking to run 32 or 33's I believe the OME YJ kit is what I want not sure on sring over or under yet . Thanks again for you videos. @@Zuksoffroad

@Zuksoffroad 8 месяцев назад

@@michaelantonio1367 OME makes springs NOT YJ kits. ARB is a good brand but all YJ springs have different weight to sag numbers. Get educated on the YJ kits. None of us make a SPUA that will clear 32-33” tires.

@michaelantonio1367 8 месяцев назад

Yes I was referring to the yj JP-eater kit from RR. They have one that used OME wrangler springs but it looks like it has way more lift than i need for 33's. The regular YJ springs sprung over look like the way for me. @@Zuksoffroad

@MrFinality69 3 месяца назад

I have a 1995 geo tracker. Do you know who makes a spool for the rear and what I can do to make the front stronger? Only going up to 32" tires at the very most.

@gmrocwater9922 9 месяцев назад

👍👍👍👍👍👍👍👍

@richardwest2505 10 месяцев назад

Hello Myron you said the fuel injected Samurai's had similar fronts to the sidekick. Did that start with the '91?

@Zuksoffroad 10 месяцев назад

I am not sure when single pin carriers started. Suzuki was no doubt using whatever they could find. The end of the samurai the end of OBD1. Beginning of OBD2 in sidekicks 96. Suzuki Japan embraced the suck and got thru it.

@MrFinality69 3 месяца назад

I have a 1995 geo tracker. Do you know who makes a rear spool and what I can do to make the front stronger? 32" tires at the very most.

@Zuksoffroad 3 месяца назад

Was on the road 2k miles missed replying. No 2wd reduction putting 32” tires on will make it very sluggish on pavement. A samuria spool fits inside a rear sidekick tracker carrier.