Building a JEEP XJ Rear bumper Tire Carrier

Jeep Cherokee XJ / Overland Storage / DIY Drawers & Gullwing Windows

Сергей Бондарчук: разговор мамы с сыном

The clown broke the wings of the white angel and gave the wings to Harley Quinn!#cosplay

Проведал Маму Самвела В Больнице!Прогулялись ! Все Под Контролем ! Идет На Поправку ❤️‍🩹

THE POLICE TAKES ME! feat @PANDAGIRLOFFICIAL #shorts

Swing Arm Wrap Around Tire Carrier Build / Jeep Cherokee XJ

Workshop to Wilderness

Подписаться 39 тыс.

Просмотров 14 тыс.

50% 1

Видео Поделиться Скачать Добавить в

In this video I build a swing arm tire carrier bumper for my Jeep Cherokee XJ. Its a short arm design with a rotating head that keeps the tire compact to the Jeep. This build incorporates the original tire carrier mechanism I used previously but this new design combines the bumper and tire carrier into one unit and shaves off 20kg.
Thanks for watching.
/ @workshoptowilderness
Support me on Patreon - / workshoptowilderness
Check out Jim's Overland Gear at GRABmeGEAR , Discount Code is MIKE10 - www.grabmegear.com/
Affiliate Link to EcofProducts - uk.ecoflow.com/pages/portable...
My Amazon Affiliate Store - www.amazon.com/shop/mcqbushcraft
Follow me on Instagram - / workshopwildernessadve...
Follow me on Facebook - / workshop-wilderness-ad...
Contact RJ at - rjsdesertspeedshop@gmail.com
Check out RJs Instagram - / lil_rjs_jeep_crisis
Useful Links
Offroading in Sweden - www.swedishepa.se/Enjoying-nat...
Road, Trail and Terrain Laws - www.svmc.se/smc/SMCs-arbete--...
Driving Private Roads Sweden - www.swedishepa.se/Enjoying-nat...
Wikiloc Trails - www.wikiloc.com/trails/offroa...
Road Map - nvdb2012.trafikverket.se/SeTr...
Jeep Spec:
1999 Jeep Cherokee XJ 2.5TD RHD.
Summer Tire - 35x12.50r15 BFG KM3's with 15x8 3.75" backspacing (-19 offset).
Winter Tire - Cooper Discoverer ST MAXX Por Studded 35x12.50r15 BFG KM3's with 15x8 3.75" backspacing (-19 offset).
Lift Front - RC 4.5" Coils and N2 Shocks (3" Coil Spacer).
Front Shock Bar Pin Eliminator.
Dana 30 High Pinion with Artec Industries Lower Control Arm Mounts with modified upper mount and modified Track Bar mount.
Front RC Control Arm Drop Bracket.
Ruff Stuff Short Arm Single Himes.
RC Extended Sway Bar Links.
Dana 30 Rock Crusher Diff Cover.
Ruff Stuff One Ton OTK Steering.
6" Lift Drop Pitman Arm.
Ruff Stuff Front and Center Frame Stiffeners.
Rear DIY Frame Stiffener and Rear Frame Tie in Kit.
6" x 2" Box Rocker replacement with Tube Slider.
Modified Factory Bumper with Side Sliders.
Rear Tow Hitch Tire Carrier that bolts into Rear Frame Tie in Kit.
Modified upper Shock Crossmember for Rear Shocks
Rear Axle Chrysler 8.25 29 Spline with modified High Clearance Shock Mounts.
Rear Shocks 6.5" Trailmasters.
Rear Leaf Springs 5.5" Rubicon Express
Rear RC Shackle Relocation Bracket.
Stainless Steel Braided Brake Lines front and back.
Warrior 9500lb Winch.
Front Bumper - Ebay Custom Made.

Авто/Мото

Опубликовано:

22 апр 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 115

@mtbmaniac25 Год назад

Yes! Another vid in the workshop!

@93muller 10 месяцев назад

I am so glad I found your new channel. I used to watch mcq bushcraft religiously. Keep it up!

@WorkshoptoWilderness 10 месяцев назад

Thanks for watching!

@GMac2776 Год назад

Never knew you had this channel, followed your old one and seen your post about this channel. Glad you are still making videos👍

@JackFalltrades Год назад

You needed a helper, or at least a spotter for removing that tire carrier! It looked like it nearly pinned you to the floor! 😀

@GrizzlyPath Год назад

I know you said the actual DIY was a drag, but I enjoyed the video! Love the fab stuff.

@WorkshoptoWilderness Год назад

Thanks for watching. I think if I had a bigger workshop or I was working outside it would have been nicer. It's the dust.

@JackFalltrades Год назад

@@WorkshoptoWilderness Good to see you're using a respirator.

@WorkshoptoWilderness Год назад

@@JackFalltrades yeah its a good one too. A gas filter but I open the doors regularly and flush the place out also.

@JackFalltrades Год назад

@@WorkshoptoWilderness Hearing protection is important too. I'm at an age where I'm starting to have issues, though I was usually protective of my hearing. My Subie is louder than I'd like, and eventually I will try to deaden the road noise like you did in your Jeep. I have too many other projects going, though! 😀

@jamesa7506 Год назад

Hahaha! You know you love it! And we love watching you do it just as much as Jimmy does! 😁👍

@JonathanBaileyn2u Год назад

You so stole Megs scale.. 🤫 and a cutting board from the counter. Loved it! Congrats on the new fabrication.

@maximazur4854 Год назад

Cheer up Mike! We definitely enjoyed it 🙂

@WorkshoptoWilderness Год назад

Thanks, glad you enjoyed it and thanks for watching!

@chipchaffee2416 3 месяца назад

Very impressive fabrication work with limited resources. Just found your new channel last weekend . Must say I’m finding it very enjoyable. Keep it up mike . I think your new channel is going to be a big success.

@WorkshoptoWilderness 3 месяца назад

Thanks for tuning in! Appreciate you watching and glad your enjoying the content!

@JackFalltrades Год назад

Actually, I did enjoy the video. I think I know how you feel. After a long, difficult project, I usually don't as much feel satisfaction as I do relief that it's finally over! 😀

@WorkshoptoWilderness Год назад

Yeah that's it basically! It's over....almost

@JackFalltrades Год назад

@@WorkshoptoWilderness Yes, you mentioned a few more things to take care of. I presume you needed to reduce weight for fuel consumption, and that it will all be worthwhile.

@WorkshoptoWilderness Год назад

@@JackFalltrades Fuel consumption probably wont change without a drastic weight reduction. Its more just to try and move the Jeep in the right direction. Less weight, less stress on the components when its working hard. I will swap the seats soon which will shave off another 10kg. I've managed to take out about 18kg of unnecessary camp gear and 7kg of frame work I made for a shock tower. Also a synthetic winch line. So far its about 45kg down which is pretty significant. It can be more but I would have to swap back to my titanium cooking set and ditch the cast iron skottle. I'm not sure I can do that because its really enjoyable to cook on. I don't think there is anything else I can do to lighten it, no spare tire would mean 50kg down but again its a risk. Maybe for the summer no spare would work.... I will have to think about it all.

@JackFalltrades Год назад

@@WorkshoptoWilderness Your starting to sound like a minimalist backpacker! 😀 Soon you'll be drilling holes in your toothbrush. 😄 Can any of that steel be replaced with aluminum, fiberglass, or composites?

@WorkshoptoWilderness Год назад

Hahaha. Drilling holes....... I didn't think of that! I might start doing that on some things

@TLOverlander Год назад

You are a good fabricator, Mike. I'm a big proponent of light weight rigs...

@chopperchuck Год назад

as a welder with 40 + years of experience , well done Mike

@JackFalltrades Год назад

Welding is a skill I never learned, and I may be around your age. What kind of welding was Mike doing? Is it difficult to learn?

@chopperchuck Год назад

@@JackFalltrades mig or metal inert gas welding

@JackFalltrades Год назад

@@chopperchuck Thanks 😊 Difficult to learn?

@chopperchuck Год назад

@@JackFalltrades that depends for the type of fabrication that Mike is doing no it's not For welding pipe and boilers and ships together it is

@classic.cherokee Год назад

Great work Mike!

@long-jeep Год назад

Nicely done even if it was a pain in the ass. 😆 I appreciate your sense of humor as well.

@dantheman7719 Год назад

That's a tight fit.....ooooh matron About a cigarette paper clearance on the roof.. I guess you can always lower the tyre pressures... Good bit of welding mate...love the customizing..and the modding...you need a sub woofer...a few televisions..and a games console installed buddy.😉 Love it...👍

@WorkshoptoWilderness Год назад

The roof clearance vanished once I took off the bumpers and tires. Juts shows what 130kg does on the back end. Haha, nooo mate I don't want to go down that road. Maybe a Pizza hut Ice-cream machine in the back curling out some treats. Thanks for watching.

@wildlandcamplife6532 Год назад

Dude it’s so funny watching your videos. You just have this subtle humor. You’re very proper in the videos, you narrate very well but out of nowhere you’ll drop a cuss word in a funny sentence. It’s only as funny as it is because it’s so rare. The end, “the work shop is an absolute fucking mess” just got me.

@phillims1 Год назад

I love your fabrication. It gives me inspiration that I might actually be able to make some things. It’s sometimes disheartening to watch guys with benders and plasma and 20,000ft2 shops.

@WorkshoptoWilderness Год назад

I know what you mean. I often look for DIY garage videos when I'm making something because that's my level. I do like watching the big shops at work, I just can't quite get there the same way lol. Thanks for watching.

@officialWWM Год назад

I agree! I love that he does all this incredible work in a tiny garage with not much more than a Mig welder, a grinder and some clever thinking!

@forgedfromfreedom Год назад

Hey Mike. Always great content from your channel. Keep it up. 👍👍

@jeffaguiar8970 Год назад

Been waiting for this

@kingturd35 Год назад

Structural welder here mike, 2 things you could save weight by just stitch welding (10mm or so at a time skip 10mm) also over here in the states it’s pretty common and easier if you make your rear recovery point the trailer hitch mount. On my xj I just use the mount and slip a strap in and use just the hitch pin as it saves more weight

@WorkshoptoWilderness Год назад

Last night I ordered a weld in square hitch and a recovery d shackle hitch. Makes the whole thing much easier! Thanks for the idea. I always have this paranoia of stitch welding and not being able to paint in the gaps. I guess its way lighter though. Thanks for watching

@officialWWM Год назад

@@WorkshoptoWilderness you can just use seam sealer in the gaps :)

@JeffreySchellenberg 8 месяцев назад

I don't even have an XJ, I have a ZJ. Why did I watch this? Anyways, great work. Looks phenomenal.

@seanharris2125 Год назад

Mike, get yourself a cheap fire blanket from the hardware store to use as a welding shield for delicate cover of car. Towel can still catch fire bud.

@WorkshoptoWilderness Год назад

I should really do that. Thanks 👍

@JackFalltrades Год назад

Can't watch video now. Heading for the beach. It's 18° C now. Should be 32° later. 😊

@TimRoyalPastortim Год назад

Great job as always Mike... the XJ gets more incredible (and lighter) again! Just finished fabbing my winch bumper for my 95 XJ... I had buddies helping which always made the job more enjoyable for me. I've already rescued 4 people with the winch. Our snow looked like yours (live at about 6000 feet - 1830 meters) in the NE Nevada, USA Ruby, and Independence mountains. If you ever get to the Western inland USA you will have some unforgettable Overlanding opportunities, and I'm sure plenty of us following you would enjoy guiding you to some great places.

@WorkshoptoWilderness Год назад

Sounds like a beautiful place, I would love to visit the US and travel around. It wont be for a while though If we can. My wife still wants to get back to Canada to vist her family, I image that will happen first but they are close lol so maybe a road trip. Ah nice, winches and snow go hand in hand. Thanks for watching!

@JackFalltrades Год назад

Mr Arcs and Sparks! 😀

@imaley Год назад

Well I enjoyed it, good work

@pauldoherty5589 Год назад

Great video Mike

@forestroadexplorer Год назад

Good work, and great video, it gives me inspiration to continue building on my own stuff.

@kermitshatley1903 Год назад

Excellent job as always , you are always a joy and fun to watch,yea and that knowledgeable part to. Thank you

@timetoxplore Год назад

Great vid, gives me a few ideas for the Explorer rear bumper build. Like you, I need a lighter setup.

@officialWWM Год назад

I’ve always really liked your tyre carrier. I’ve never been able to find one so I built one similar. It’s not as good but it works :) And I really enjoyed your video!

@samrowan Год назад

Ha I really enjoyed, you crack me up. ace work

@jcricket-vr5xr Год назад

Your welding and fabrication skills are amazing Mike nice job

@ekbanjosworld4926 7 месяцев назад

Yes, I agree! I enjoy the designing and building stages, but detest all the cutting and grinding!

@aztecahernandez6539 7 месяцев назад

Great Job Mate. Cheers.

@explore_off_road Год назад

I really dig those tie in brackets. Beefy! And I like Overkill at times ... and that is a good time. Nice work.

@kevinzimmerman2304 Год назад

Nice job on the bumper! I'd like to build one for my jeep someday..

@robertwimmer6528 Год назад

Nice job!

@JackFalltrades Год назад

Good to see you again, Mike. 😊

@051biohaz Год назад

Another cool project on the Jeep, I like how you are always making things work better for you. Just like back in the day when you changed your pack and gear around…thanks for the upload..:)

@WorkshoptoWilderness Год назад

My LK35 hasn't changed much over the last couple of years. Just a new frame. That's normally how I know i've reached a design that's working. The Jeep has a way to go just yet but its pretty decent these days considering where it started. Thanks for watching.

@jimmyroberts7191 Год назад

Omg that ceiling clearance is on point!!!

@abcdefg7331 Год назад

Great work Mike! Have you ever considered to drive the Sweden offroad tour? Two weeks constant offroad new track every day.

@WorkshoptoWilderness Год назад

We have considered it as a summer trip for the family. It looks like a lot of fun and I miss the real offroad obstacles and mud that you don't get on roads. When my son is a bit older we will defiantly do it as a family, at the moment it might just be me. Thanks for watching.

@abcdefg7331 Год назад

@@WorkshoptoWilderness great. hope I see you on the trail then.

@Gunma_garage 9 месяцев назад

Helluva workout! Ive alwayw ised my legs when installing/removing and its so effective 😅🤣. Nice rig, i need to blueprint a decent spare carrier (and get a 5th K02 😂) so this was awesome info mate, cheers! Love the overland setup inside as well 🤘 Also, damned nice welds my guy

@WorkshoptoWilderness 9 месяцев назад

Yeah the legs definitely came in handy on this one. It was a pain to build but it's doing well and no rattles or problems yet, which is always nice. Thanks for watching and for the comment

@ekbanjosworld4926 7 месяцев назад

I'm installing a set of Ironman Fab's Shackle Relocation Brackets. Checking things out and the new Smittybilt XRC Rock Crawler/Tire Carrier Bumper. The bumper mounting brackets are long and it's pretty much a dedicated design that was intended to be used with the factory shackle pockets. I'm going to have to cut an area out of them to allow the Shackle Relocation Brackets to be mounted against the rail. I'll still be able to use 4 bolts on the bottom of each side and depending on the fit, probably welding the joints together? Love the way you designed the swing away and the wrap around on the bumper ends!

@andywilson1117 Год назад

Great video as always Mike, thanks

@nathanbarns3750 Год назад

Awesome video as always! This channel is completely underrated and I don't understand. I noticed your orange welder. Is that a Vulcan? How do you like it?

@WorkshoptoWilderness Год назад

Thanks for watching and the comment! I don't think it is a Vulcan, I will have to double check though. I Like the welder though, now i've worked with It a lot I know how to to set it up and get decent welds out of it. Mayne in time more people will check out the channel, its a competitive subject I think.

@insaynbcr Год назад

Man, you could use a plasma cutter for so many reasons.

@WorkshoptoWilderness Год назад

I have no experience with one. I could get one though. Would save all the dust and grinding in the garage. What's the price range of a alright one?

@insaynbcr Год назад

@@WorkshoptoWilderness No experience needed. It's the opposite of welding. Put the tip where you want to remove metal and pull the trigger. Used, a couple hundy to a grand. New, a grand to several grand. Absolutely worth every penny!!!! Your fabrication time will be greatly reduced as you can cut any shape quickly.

@WorkshoptoWilderness Год назад

Well you have inspired me. I will start hunting around and see what I can find. Thanks for the information 👍

@ekbanjosworld4926 7 месяцев назад

Well, I bought a cheap one! Doesn't really do that well for me on 110V! It cuts, it worked great cutting out the old shackle pockets, but it didn't impress me on the cleanliness of the cuts! The way it's working I'd have to cut outside of my lines and creep up with the grinder! I can cut it tighter on the first pass with the grinder! The model I bought is said to work better on 220! Less air pressure and amperage actually worked better 30/30...

@insaynbcr 7 месяцев назад

@@ekbanjosworld4926 Be sure to have your ground as close to your work as possible. If you have it too far away, or not actually grounded well it will negatively affect your cuts.

@rsvp6 Год назад

I did enjoy the video! I was looking forward to this one to see how how you were going to make it. I still debating on whether to carry a spare on the back or ditching the spare and going with tire repair kit. I found a great video on repairing sidewall damage so between that and the plugs I think I can get back home. I can use the extra space and the weight hanging off the back bothers me actually.

@WorkshoptoWilderness Год назад

Its such a lot of weight in the worst place. The old setup was near 130kkg just in bumpers and spare. Its nuts actually. It makes a bit difference given the jeep now touches the garage roof with it all removed. I took it to the wash station to get the dust off without the bumpers and spare tire and the difference in driving was really noticeable. I've contemplated not carrying a spare also. It saves bout 48kg in my case. I have a tire repair kit but there is a part of my that feels like swapping a tire is just far easier when the temps are horribly low. DO you have a link to that sidewall video? Thanks for watching!

@rsvp6 Год назад

@@WorkshoptoWilderness I did not think about changing a tire in the snow and really dont want to! I rarely have flat tires anymore since upgrading to more modern tires. This a link to the first video I watched and I have tested the glue , and it really works. I see now there are more videos out. I am only looking for repairs that last long enough to get me a point where I can get to a spare. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-JC_Kf7WSa1M.html&ab_channel=sixtyfiveford

@SebastianDaniec Год назад

Good video Mike! I think i wan't to try swinging tires. Mine is going to be attached to the tow-hook on my sissy SUV. Removable for city driving and put on during Överlanding season. I hope to meet you this year on overlanding expo at 59°6.595'N 16°58.068'E on the 13 May!

@WorkshoptoWilderness Год назад

Ah wow 13th of May! That's near. I will check those coordinates and see where it is. Would be great to come and meet you and others. A tire carrier on a tow hitch its certainly a good idea, it will be really strong and like you say removable. Thanks for watching

@shaunmccaw2911 Год назад

Cracking job mate but do you ever give your brain a rest 👍🏻🏴󠁧󠁢󠁳󠁣󠁴󠁿

@WorkshoptoWilderness Год назад

This video is segments of work spread over two weeks. In-between im with my family and friends and working. Life's pretty chilled to be honest but when I'm working I get stuck in. Thanks for watching

@seanmacdonald8476 Год назад

Damn i really like the short length of the actual swinging section, looks like it's only made possible by the swivel mechanism at the top that allows the tire to miss the vehicle and open 180*. I think you mentioned a long time ago they don't make it anymore do you remember the brand out of curiosity?

@WorkshoptoWilderness Год назад

I originally found the company and it had shut down many years ago. It was called wessex engineering from memory. Mine had number 246 and 1996 on it originally. It was partly assembled and damaged.

@seanmacdonald8476 Год назад

@@WorkshoptoWilderness Thanks, it's pretty cool, I imagine any DIY method I find to make something similar would likely create a jiggle point in the system that one seems stout. Back to the drawing board for me

@WorkshoptoWilderness Год назад

@@seanmacdonald8476 I have to take the mechanism apart and just check it over so I will show it in the next episode. Its fairly simple but I'm not sure if I could make it from scratch without some pre fabbed parts.

@blister4walken Год назад

Bringing sexy welding back. Oooooooh. 😅

@TheOpenboater Год назад

Good video. I'm not so fussed on the latch mechanisim sitting proud of the horizontal. Will it not be a nuisance when putting gear in and out of the boot?

@WorkshoptoWilderness Год назад

I don't think so, I can rest my nut sack on it while sorting my gear. Jokes aside it doesn't seem to be an issue. The whole thing sits in further than the previous setup so I don't really notice it. Its also higher so that's nicer than it being on your legs.

@TheOpenboater Год назад

@@WorkshoptoWilderness fair enough. I'm new to your new channel so I'll be catching up with a bit of binge watching.

@WorkshoptoWilderness Год назад

Thanks for watching and having a look around.

@JackFalltrades Год назад

Video coming on Monday? 😊

@WorkshoptoWilderness Год назад

It should be up today

@jeffkatzer Год назад

I enjoyed it, maybe more than you.

@hempseedaddict Год назад

So did ya want us to dislike the video then?🤪

@WorkshoptoWilderness Год назад

Haha I think I will lol. Thanks for watching.

@jannepallari4697 Год назад

🖐👌

@Oldblue110 Год назад

❤👍👍👍

@danielgotz1027 Год назад

Awsome as usual mike. But... i hate to be the wise dude. Sure your welds will support the tow wight of 2020 kgs ( 1 cm of good weld usulaly can suport 1000kgs if u dont cont the material its welded in) Often its not the welld that craks but the suraounding material. But i think this will hold upp nice. But as a former mot engineer and welder. What does the swedish mot says about welding in tow hithes... well its plenty strong to be abble to handle your towing weight no dougth. O god my swenglich realy needs som work... but that isent a problem the next mot . but still awsome. More modifying. Maby its time for a coil conversion and 4 link in the rear end.....

@WorkshoptoWilderness Год назад

Thanks mate. I made the front bumper frame mounting points and I've winched myself out of situations in heaps of snow at obscure angles that are well over that tow capacity. I've also had a head on collision with an Astra at 30mph with the same bumper and it just lost some paint. I'm not claiming to be an expert welder, but I've worked as a mechanic for a while and I've seen worse welds pass inspections done by people who think blinking when the guns on will protect their eyes. I guess i could be considered a wise dude too for wearing a mask. Sadly the one thing the inspector would not like is a 4 link conversion.... unfortunately the vehicle would require a new registration...

@danielgotz1027 Год назад

What is astra for animal? Yup you would need a new registration with the 4 link. If the mot enginner notice it... and ur welds ar plenty strong. I think those are the last thing that is gonna break on yr rig. And its realy wise of u to consider weight. Not only for traction and fuel. Its the mot thing again.... the sweeds are quite hard on changes on viecles.... atleast in the southern part. In the north its more common sence.

@danielgotz1027 Год назад

Ooo the tan u get from a real welding session. Or the eye scratch u get from ( im just gona tack those two things together) 😂😂😂

@danielgotz1027 Год назад

Well if not 4 link... i wounder if a set of portal axels from a volvo tgb would fit... the volvo axels isent that diffret compared to the dana 30.....

@WorkshoptoWilderness Год назад

@@danielgotz1027 haha, its a small car made by Vauxhall. It was in the UK. They were on the wrong side of the road coming around a bend. Nobody was injured but their car was written off.

@hondaman4423 Год назад

"then only I know it's shit" is a curse. Then you waste hours or days fixing something nobody even knows is wrong. I know that feeling well.

Далее

Building a JEEP XJ Rear bumper Tire Carrier

18:20

Building a JEEP XJ Rear bumper Tire Carrier

Просмотров 77 тыс.

Jeep Cherokee XJ / Overland Storage / DIY Drawers & Gullwing Windows

22:33

Jeep Cherokee XJ / Overland Storage / DIY Drawers & Gullwing Windows

Просмотров 25 тыс.

Сергей Бондарчук: разговор мамы с сыном

1:45:47

Сергей Бондарчук: разговор мамы с сыном

Просмотров 230 тыс.

The clown broke the wings of the white angel and gave the wings to Harley Quinn!#cosplay

00:33

The clown broke the wings of the white angel and gave the wings to Harley Quinn!#cosplay

Просмотров 11 млн

Проведал Маму Самвела В Больнице!Прогулялись ! Все Под Контролем ! Идет На Поправку ❤️‍🩹

30:47

Проведал Маму Самвела В Больнице!Прогулялись ! Все Под Контролем ! Идет На Поправку ❤️‍🩹

Просмотров 152 тыс.

THE POLICE TAKES ME! feat @PANDAGIRLOFFICIAL #shorts

00:31

THE POLICE TAKES ME! feat @PANDAGIRLOFFICIAL #shorts

Просмотров 1,5 млн

DIY Hitch Tire Carrier

8:15

DIY Hitch Tire Carrier

Просмотров 21 тыс.

Carpuride 7" HD Navigation Display / Installation Jeep XJ

18:05

Carpuride 7" HD Navigation Display / Installation Jeep XJ

Просмотров 6 тыс.

Building A Front Skid / Dana 30 Spider Gear Replacement / Jeep XJ

25:56

Building A Front Skid / Dana 30 Spider Gear Replacement / Jeep XJ

Просмотров 9 тыс.

This Is Why Your Jeep Gets BAD Gas Milage

11:43

This Is Why Your Jeep Gets BAD Gas Milage

Просмотров 31 тыс.

4x4 Econoline - Dual Swing Arm Rear Bumper

12:12

4x4 Econoline - Dual Swing Arm Rear Bumper

Просмотров 2,1 тыс.

Jeep Cherokee XJ Build - DIY 4.5” Suspension Lift kit Installation

29:53

Jeep Cherokee XJ Build - DIY 4.5” Suspension Lift kit Installation

Просмотров 60 тыс.

Jeep XJ Clutch Install and a Noisy AX15 and NP231

26:48

Jeep XJ Clutch Install and a Noisy AX15 and NP231

Просмотров 8 тыс.

JEEP XJ upgrade the Steering wheel for a more modern feel

18:25

JEEP XJ upgrade the Steering wheel for a more modern feel

Просмотров 14 тыс.

Jeep Cherokee XJ / Basic DIY Interior Mods

30:00

Jeep Cherokee XJ / Basic DIY Interior Mods

Просмотров 215 тыс.

Built My First DIY Jeep XJ Bumper! Turned Out GREAT

22:43

Built My First DIY Jeep XJ Bumper! Turned Out GREAT

Просмотров 8 тыс.

ЧЕРЕПА В МОГИЛЬНОМ ОЗЕРЕ!!! мы стали поисковиками и пожалели об этом .. 8 часть

47:25

ЧЕРЕПА В МОГИЛЬНОМ ОЗЕРЕ!!! мы стали поисковиками и пожалели об этом .. 8 часть

Просмотров 684 тыс.

Напугали,но конфетку дали 😅 Часть 2 #мотодевушка #moto #insta360 #мотопитер #мотобудни

0:21

Напугали,но конфетку дали 😅 Часть 2 #мотодевушка #moto #insta360 #мотопитер #мотобудни

Просмотров 6 млн

Какую машину купил Тимати?🤫 #jetcarru #shorts #youtubeshorts

0:48

Какую машину купил Тимати?🤫 #jetcarru #shorts #youtubeshorts

Просмотров 1,8 млн

Ахмеду стало ГРУСТНО! cls ПРОЩАЙ 🥲#wengallbi #mercedes #cls #1000hp

0:26

Ахмеду стало ГРУСТНО! cls ПРОЩАЙ 🥲#wengallbi #mercedes #cls #1000hp

Просмотров 874 тыс.

КОГДА ОЧЕНЬ ЖАРКО😊😂 #мотоТаня when it's very hot #motpTanya автомобилисты спасают мотоциклистов

0:15

КОГДА ОЧЕНЬ ЖАРКО😊😂 #мотоТаня when it's very hot #motpTanya автомобилисты спасают мотоциклистов

Просмотров 4,1 млн

А что выберешь ты? Питбайк или советский мотоцикл? #shorts

0:41

А что выберешь ты? Питбайк или советский мотоцикл? #shorts

Просмотров 2,2 млн

Будьте осторожны при выборе машины 😎🤪😂 #амбал #токио #сериалкопы

1:00

Будьте осторожны при выборе машины 😎🤪😂 #амбал #токио #сериалкопы

Просмотров 573 тыс.