Switchable Smart Film Installation & Rear Projection from Smart Glass Technologies 

That is awesome! Please contact us on smartglasstech.us/

Yes, Realsmarttechnolagies has a few window companies that put in windows.

It can be front but the quality is not so good.

Glass can be installed by any licensed glazier contractor and electrician to connect, the smart film is more difficult. We have smart film certified installers in US and Canada.

Yes is possible. It’s depends of the projector, but you may loose the quality, you have to try first the projector.

I would like to follow up on this. Most any projector should be able to front or rear project. It is a simple image flip done within the projector. What caught me off guard is you stated you might lose quality.. Do you suggest that front projecting may lose quality? What would be the cause of this? Reflection from the glass? Thanks so much.

a22fc Ww ca-n trim at the job side, but before we taking a job like that we need to inspect and see all the details. Please send the pictures and more details at sales@smartglassmiami.com yes we have job in Huston next month.

@@yusherry8614 so professional that you reply one year later lol

Yes of course. You can use Lutron Caseta (smart switch)

Pedro Martell a rear projector

Yes of course. Anysize.

We need more details. Anyway most likely the wires will be visible. Or you can use a magnetic connection and use the transparency mode only when the windows are closed.

The PriWatt film is not clear as regular glass. Depends of the light contrast, you can have some reflection. I recommend it to use only if you really need privacy. Like bathrooms, berdooms, etc...

@@imobilexpert Damn....I Have a new house going in with 1200x 2400 x 20mm thick panes,,, 4 floors of total wrap around glass of a 10,000 sqft house.....

Sure. Please get in touch with NYC dealer at www.smartglassnewyork.com

You will either have to have wires that connect to the door and loop over to the wall, but the wire will have to have slack in it to be able to move with the door. For this method, put the wire on the door at the back top edge of the door and then loop it to a junction box halfway between the doors full travel distance. Use at least 16ga stranded copper wire (we call it “cab tire”). The other possible way would be to put 2 conductive roller contacts on the top of the door, and 2 strips of conductive copper under the track of the door while insulating them from the track. This way is cleaner, but more difficult to install. And the rolling contacts may not be as reliable and will be subject to marring wear and tear. Also, be careful to only put voltage to the window film, and not the whole door. 48V will sting a little, especially if you’re wet lol.

It’s case by case, you can trim the film on the job site, but have to use very sharp knife... for example we trim for door handles.

Corbin Buesch - the smart film is operated on 48V ( we have a UL certified transformer from 110>48V) - for 100-120 sqft we have 125Watts transformer - for 120-300 sqft we have 375Watts transformer - is a PDLC technology (polymer-dispersed liquid-crystal) Get more details here: www.smartglassmiami.com

Hello ! did you find the answer to your question? I also wanted to try to do this

Yes it can be done to vehicles

Yes. Please contact us at smartglasstech.us/

: )

90$

Good Question

contact an office closer to you at sgtglobal.co

Please access the website, chose the city close to you and contact us for a quote www.sgtglobal.co

is not really possible.. you have to install without babbles..

@@imobilexpert making fun of non-english speakers doesn't make you a better company.