SwitchBlade™ ATV Snow Plow System Assembly and Installation - KolpinOutdoors 

Very easy to follow concise instructions, with no BS. Great job Sir, thank you.

I just wasted a lot of time building this plow by reading the terrible instructions book that first tells you to install something, and then when you go to the next step, you have to disassemble the thing you just did to add something else. I wish i found this video before i started. You made things so much easier by laying it out the way you did. Keep up the good work.

Love to see this put together as a 48” unit

In between cuts he's like, "Let's go ahead and give me that f*ckin impact driver. "

Video was way better then instructions!! Just put it all together with ease !! Thanks!!

You should make an updated version because this is completely different than the switchblade I bought yesterday

Glad i found this before trying the instructions 😂 instructions are only good for checking which bolts to use besides that this guy is way more easy to follow. Still took me like 2hrs start to finish lol

Thanks very much I'm putting on a 2014 Can-Am Outlander 1000 Max Limited the directions are kind of a pain in the ass I was able to get this done in about 45 minutes to an hour with your video thank you making it easier!

Thank you so much 🥰

the way you assemble this plow looks much faster and more efficient than the way the instructions that comes with the plow tell yo to do it. either way, this seems well built, very heavy duty materials. very easy to assemble

This guy here saving us all some BS hahah thanks guy

Honestly thank god for this video way easy to install watching this compared to reading the actual instructions 🤷🏻‍♂️🤦🏻‍♂️

Took me freaking 57 beers to put this together, throw the instructions in the wood stove

Between the video and the instructions it went well. The video is too simple and the manual is too technical but together they do fine. Finding a mounting place was kind of interesting but in the end it was fine. A good heavy duty product. I'd buy it again - but just know that it takes more than 1 hour to assemble.

I got the UTV switchblade it’s the same but adjustable 60” up to 74” . This year I’ve put it on my 2023 Honda pioneer 520 as a 60” setup without the push tube extensions. Last year I used it on a parking lot on an s10 Jimmy as 74” with the push tube extensions .

Hinge lever bracket needs to be shimmed in the back bolt so plow will pivot more easily. I installed it on the polaris 570 and the mounting bracket fits very good just ahead of the battery but you have to grind the metal battery box on the corner very little.. Very pleased

Clicked on the video for the part how to install mounting brackets on the bike it doesn’t even show ffs

Any videos on universal mount install? This video skips that whole Step..i know they vary per quad but would be nice to see it done once

Can you install the atv one on a polaris rzr trail premium 2023?

I called Yamaha for a new Warn plow mount for my 2021 grizzly and they said it would cost $252 plus tax, thought that was kinda steep for a metal plate so I did some research found this Koplin Switchblade. Box said 1hr. I had it together and on the bike in about 3hrs. I followed this video and ran into a few issues(tighten bolts then having to loosen them to do the next step) overall went together pretty easy. I had to remove 1 piece of my skid plate to mount the plow mount which isn't a big deal for the winter. 2 things I don't like, where the winch hooks up to the plow(to straight up/down, very little lift) and hooking it up to the mount was kinds of a pain in the a**. I ended up having to use a car jack to lift it into place. But for $359 cdn + taxes in can't complain, we'll see what it doesn't tomorrow when the storm hits.

Hope the mounts are better there your old ones.the old ones are bending the frame on my quad

If you tighten the bolt on the tube plate you can’t move the blade side to side correct?

Could I mount this to my American Landmaster L7 UTV? It is basically the same front end with the wrench like the ATV in your video. I just want to make sure it will work before I purchase one. Thanks

Push tubs are really short, very difficult to mount on a 2012 can am outlander 1000. Skid plate on can am makes it really hard to mount also. Need longer push tubes!

It took me a lot longer to install mine as well. I assembled it in my garage. I had it lifted up to get under easier. I cut the bolts underneath like it says to. Lowered the 4 wheeler drove out the garage and tore out the bottom plate that the door goes down to. So on my 4 wheeler it is too low to the ground after the plow is attached!!

at 4;48, he tells you to tighten the pivit bars up, don't tighten them, just snug them so the thing pivots. when it is caked full of snow and ice and your freezing your ass off outside trying to loosen the bolts, you will thank me

Those push tubes need to be about 6” longer I have a Honda 520 and the plow is two close to the front of the bike

What is the steel strap with the 6 holes in it for...I don't see it anywhere in your video

Has anyone else bought the utv set up and put it on a atv? I did,the only thing different is the size of the blade obviously and the mounting bracket is longer.

u didnt show mounting the mount?

Hey Guys, Just yesterday I put this blade together with a friend, it does only take about an hour, only on my 2021 Sportsman 570 the Mounting bracket just didn't line up with the photos in the directions or the pictures that Kolpin Emailed me after we started freezing our asses off trying to get it mounted. In the end we figured out a way to do it with 3 U bolds like required ( NO TIRE RUBBING, NO BORING HOLES IN THE FRAME. NO BENDING THE FRAME) as I've seen in some Comments and other videos, if you're bending the frame you're doing something wrong... In the end it works without issue. Best to line it up to the frame before hand and make the call yourself. Otherwise I've seen some long term reviews, seems to check out as far as durability goes. Just try to lift the box when you buy one lol, its heavy duty. Non the less it's a decent cheaper alternative as oppose to going with the factory one from Polaris. Happy Plowing.

Wont the seams where the 3 metal plates come together to form the blade make it more susceptible to rust?

at 3 minute mark of this video, do not tighten up the bottom bolts , you will have to loosenthem again to get the next step done

So can the blade be removed easily and quickly for when not needed

What’s the adjustment on the outside angle brackets with slots ?

I am trying to put the plow blade hinge pivot plate between the vertical supports and it does not fit. No idea what I have wrong. Any ideas?

Instead of plowing snow I'm gonna get some friends together and do a shot every time this guy says assemble

Will this fit a 1999 honda 300 fourtrax

the bolt holes did line up on the right side of the plow,after putting it together 3 times,worst thing i bought in a long time,i got mine a lowes,they took it back with no trouble

Looks like it's pretty thin gauge steel. Anyone like to add to this?

I didn't see a toque wrench in the video. Did you?

omg why didnt u sho0w the mount??

Even he doesn't fully follow the instructions to a T. Hahaha

go ahead and go ahead and go ahead and go ahead and go ahead and.. lol.. new drinking game.. take a drink of beer everytime he says "go ahead"

I put it together your way and it's rong for under my can am I broke bolts

Has any one put it on a EX Go Golf cart?

Your video was decent, you need to be more specific about which piece of hardware goes where. I had to jump back and forth between the video and the instructions because you didn’t tell me the exact nut or bolt that I needed.

How do you build the other blade

Missing how to take it off.

The instructions manual was hell. Fire whoever wrote it

First of all, both of our customers that bought these units gave up and brought them in for us to install. With over 200 pieces of hardware, lousy instructions, and a "universal" mount kit to deal with, they chose to pay us $60 per hour and negated any savings on the cost of the plows. The mount install included grinding, cutting, and repeatedly installing in different locations until the front tires didn't rub the mount at full lock. What a misleading piece of information you have provided.

This is the biggest piece of shit plow. Horrible fucking directions and all parts misnumbered. 6 hours later and still can’t get the damn thing mounted.

Not a clear instruction video

The written instructions are terrible. I should have looked at RU-vid first.

You get what you pay for.....cheap price, cheap plow with Chinese hardware and shotty mounting options. Do yourself a favor and Spend the extra $200.00 more for a quality moose or warn plow system that will last a lot longer.

You were doing great until you left out the information everyone is looking for concerning the mount to the atv. Ffs!!!

Worst instructions ever, none of the part numbers matched up