table saw sled/table saw upgrades/테이블 톱 확장 썰매 /망치소리 

재 업로드 영상입니다. 6:47초에 쏘스탑 사고영상/주의 사항등이 있습니다. 혹시 따라만드실 분은 같은 실수 없으시길바랍니다. 꼭 확인하시기 바랍니다. This is a re-uploaded video. At 6:47 seconds, there is a saw-stop accident video/cautions. If you are going to follow along, please do not make the same mistake. Please check.

Best table saw sled I’ve seen made on any channel yet.

Out of all the table saw sleds I've seen, this is without no doubt the best one.

The. Most elegant design I have seen so far on RU-vid.

대박 영상입니다!! 공유해 주셔서 감사합니다^^

Its a piece of art, thank you for leaving the hishap in the video. Well done great job.

AWESOME build. The parts where you setup the measuring tape was genius.

영상 잘 보았습니다. 정말 좋은 팁을 배우고 갑니다.

와우~ 망치소리님 대박 아이템 만드셨군요.. 아이디어 정말 좋습니다. 저도 아이디어 훔쳐가서 만들어야 겠습니다. 즐거운 하루 되세요 ^^

That fence is genius, great build..

감사합니다 믿고 보는 영상

That may be the coolest crosscut sled I've ever seen. Tamar (3x3 Customs) has a really cool one but you may have her beat. I dunno. I'd vote for you just because you had the guts to screw your fence in final position without the 5 cut method or even a single test cut. That's confidence!

Amazing job!!! Great video. Very inspiring.

A rather costly mistake not disabling the Sawstop mechanism prior to cutting the aluminum track. I made that same mistake when cutting a mirrored acrylic sheet. It only takes once in having to buy another safety mechanism and you won’t forget again. Your sled though is very well planned and an awesome build. I have flagged and saved your video so that I can reference when building my new sled. Thank You for sharing...👏🏽👍🏽

Wonderful video and awesome build. Keep up the good work 🤙

Unique design. Nice work! Thanks for sharing! Cheers 🍻👍🏻😊

I saw that coming saw stop never fails, slead looks amazing, thanks for also sharing the mistake

너무 유익해서 이건 뭐 유료시청해야해도 볼거같습니다!! 정말 창의적이고 실용적이고 와우 감탄만 하다보고갑니다👍

Большое спасибо дорогой друг!!! Замечательная работа! Посмотрел на одном дыхании

I really like your design for this sled. Your SawStop table saw has a key on the right side of the power switch that allows you to override the safety device for when you are cutting metal pieces, or when you are cutting wet lumber. The replacement brakes and blades can be very expensive, using this will save you a bunch of money.

Watching your video is a real pleasure. Highest accuracy and quality of work (anyway excessing many times a common DIY enthusiast need).

Great sled. I like it.

Super travail, je cherchais moi-même un tel système pour ma scie sur table. Grand merci pour ce partage. Cordialement.

a melhor mesa para serra de bancada que eu j´vi no youtube...parabens!!!!

6:45 sometimes..we learn lot from mistakes, great job with the table sled Sir

Wowzers. That is a great sled. If only I had a little more free time...

Well! Sawstop works! Got that test out of the way.

너무 감사합니다! 솜씨가 정말 좋으세요 !! 그리고 역시 쏘스탑 b ㅋㅋ

Спасибо! Отлично!

Отличная идея! Отличная работа!

Best sled I've seen since my last winter in the Adirondacks. Well Done!! I will make one. Do not run with those scissors.

Very nice! Nice design, nice workmanship! Hope to see more.

I guess you got a sawstop in case your gloves get caught while using the table saw? 🤦‍♂️

Great design! Thanks for sharing, it inspiring :)

My brother I enjoy watching your videos so much that it makes no difference what tour making. I mean dude you have a gift, you are Blessed with so much talent and design, it really blows my mind how perfect the joints are and how everything fits together I am a sign artist and do a lot of hand lettering, I've been doing it for 35 years and I am decent, but when it comes to building things I get a F. I can design something that will work, in my head, but transporting that to my hands? I'm all thumbs. Great videos, I would thanking God everyday if I could do what you do. God bless Everyone

Great design!!!

This is an absolutely masterpiece

Working on a saw in gloves is the same as putting out a fire with petrol :)

Wow very professional 👏

Nice work! 👍 👌

Good job, thanks for sharing

Просто Суппер!! Очень здорово!! Очень 👍👍👍👍👍

I thiam hle Mai,good work ,and beautiful aidea

Thank you for sharing video brother,,, like from indonesia

Very Nice Job👍

AWESOME WORK

Super idée 👍👍👍 et très bon travail bravo 👍👍

Wonderful 👏👏👏👏👏👏

Really nice work sir please keep it up

Bet you wish you had a do over on that alum channel and the gloves with holes in them ? It was a great video and a damn nice accessory. //ji

Well I thought I had seen great saw sleds before this one, It has to be the best ever.

Fantastic!

Love the sled! Sorry about Saw-Stop accident.

Karyanya sangat sempurna Ikut belajar gan🙏

Excellent, perfectly done

Muy buen trabajo

좋은채널 이네요. 구독합니다

Nice work sir

It kooks like your reaction was the same as mine when I hit my Incra miter Gauge with my Sawstop. "!!! What just happened??? !!...."ohhhhh. #@&%$*" "well there goes $125" Thanks for keeping it in there. Maybe it will keep others from making the same mistake. Nice sled! You do a great job at showing the steps. Very efficient working.

Please put the Arabic translation. I am a good follower of you and benefited from you very much ... Thank you, always with success and success.

About halfway through I was like "I wish I could get through a project like this without any problems...." oh shit.

Молодец, очень круто

Класс👍такой каретки своими руками ,я еще не видел

great idea

Very clever 👍👍👍👍👍

I did the same thing with my SawStop building face for my miter with aluminum extension.

I'm pretty sure I don't want a Saw-Stop. Just have a lot of respect for the blade, as I have for decades.

Thats a very nice system. But I'm into saving time, ill just use my radial arm saw. I may still make a crosscut sled. But honestly I dont need it.

Genius 👍

Very nice 👌🏻👌🏻👌🏻🙏

Greetings,, do you have a plan for this? To follow up correctly 🌹 I loved this slide,, it it the best that I have seen so far 😍

Amazing.

Oh, that 6:47 bit was heart breaking. A fraction of sec before it, I was thinking you must have engaged the safety over-ride. Nope, ouch to the back pocket. A good lesson to us all. Good to have spares ready. Without spares on the shelf (i have both, just in case I have a lapse of brain moment), it is considerable wait time on a new blade and cartridge.

와 쏘스탑에 쏘스탑성능 확실하네요 난 순간 뭔가 함 ㅋㅋㅋ

Nice. I will try to cross purpose this to help with finger joints on a router table or shaper. Thanks.

S ya se que subió este video hace mucho tiempo, pero es increíble la manera en que detecta este dispositivo la energía que le transmite al riel de aluminio, pero me sorprendio más la manera en la que sobrellevo la situación jajaja

impressive

Hi there, very nice , i've just discovered our job...but where could i get the plans, please?? Philip

очень грамотно!

Klasse 👍

Mantap...

👌

Respect мастеру👍!!!!! Russia 14.11.20

👍👍👍👏👏👏

Well thats an expensive oops....awesome sled though

Nice sled 👍🏻. I think you need new gloves 😅

Maravilloso. ,

Ooops. Forgot to hit the bypass button. I bought my backup just in case i did the same thing. I saw sparks fly from some staples and a few screws. Not sure if the saw being in a non humidity controlled storage for about a year affected it like it did the bolts rusting them out.

👍👍👍👍👍👍👍👍👍

Congratulations on the project, very interesting.👍👍 I have a question about the blocking system of the circular saw. Why mount it and then work with gloves that are insulating?

There is a bypass for the Sawstop, that will allow you to cut conductive materials

Good video, but words would help, even if it means subtitles!

mantap

Mantap my friend

아이고 아까워라 날 하나 버렸네ㅜㅜ

👍👍👍🖐

Круто, отбойник жалко =(

Old Chinese proverb, oh shit! Thats universal. Works in any languages.

Do you offer plans for your sled?

виртуозно 💪