Tacoma Bilstein 5100 front/rear shock install with Toytec Spring's+Add-A-Leaf 

That's exactly why I made this video I had the same problem as you. I happy it helped you.

I'm happy we could help

That’s it I am ordering a pair.

But be easy on that 1.5 aluminum floor jack on a truck.

They’re down the street

James McDaniel so your friend did it and not you..it dont count if u only do 95 percent of the job. If your friend didnt do it your truck would still be apart

Gsfbffx Pdhhdf wow you must be fun at parties

Gsfbffx Pdhhdf The Bitch in you runs strong,..obviously.

1-year later, any update on the lift you did?

@@TADDs101 gave me about 2.5” lift all around. rides great.

Did you upgrade your rear shocks?

Your gonna want to do the rear diff drop as well, it will keep your rear end from messing up in the future

05 is 15 year old springs. From what i read online you won't get the max lift with 5100 if your springs are not new. Because the shock uses the spring for lift

So, in order to run the 285’s you could stuff them in with a wheel spacer. You will rub the tire on a couple of points while turning, tho. In order to make it truly fit with full articulation, you will also need to perform a cab mount chop. Also, depending on your specific application, you MIGHT need aftermarket upper control arms. It’s really depends how far you want to go with this depending on how you use the truck. If wheeling, you’ll want to clear those tires. But not if you’re just wanting the look of the lift. But srsly, if that’s the case, it would be way more cost effective to just do a spacer lift.

no cab chop P265/70R16

I want to know too!

If you have a 4x4 trucks its a must if its only 2 wheel drive no need.

Where the hell did u hear that??....I just bought 5100's for a 2"-3"lift....

@@tadheath5856I was thinking the same thing

19:34, bottom clip setting

It's going to rub on turns in the the front. You will need to do the cab mount chop google it.

@@CARSONBOARD do you know of a shop in the Los Angeles area that can do the cab mount chop?

Yes 88 Rotors

I was wondering the same. Went back to see if I missed it in the beginning, no dice.

Nick Filipovic I haven’t had any issues yet

I had that problem also

Gotta do that diff drop the kit it’s like $30 bucks

Maybe with cutting front fenders.

They're stock sizes on 3rd gen Tacomas

Not much of a difference. A bit stiffer but I think thats because of the add a leaf.

I'm not sure

hey bro new uca's with help with alignment- caster, so tires don’t wear uneven.

but its ok too use the stock uppers but just rotate the tires every 3,000 miles.

Ok thanks for the info!

It's doing great I would recommend adjustable arms. My tires get a little of positive camber wear.

@@CARSONBOARD thanks for heads up, I’ll definitely buy a set before install.🙌🏽

Depo head lights and OEM sport grill I have a video on it.

I got the same headlights on my black '09 after I seen his headlight and grill swap video sometime ago. It was installed when the dealership changed the frame out.

I think thats only for 4 wheel drive trucks with a front diff. My truck is 2 wheel drive with locking diff.

ERAL BENISANO Not at all

Why was this question asked??....because of that spacer plate??

The vibration comes from the differential output shaft roller bearing on the drivers side. Look into east cost gear supply for the fix. It's a bushing which replaces the bearing. Easy model to do yourself and stops the vibration & chatter.

@@waynes.2983 isnt that about the same thing as the needle bearing.....cause that's what goes bad in the tacomas in the front diff. So if u have at least a 2" or great ....u need a diff drop kit cause without it, it destroys the needle bearing for some reason. To check when I starts to vibrate turn ur dial over to 4 high if it stops...needle bearing. If u dont have a diff drop dont put it in 4wd until u get one!!!

@@tadheath5856 actually my needle bearing was making noise but when I removed it, it showed no signs of wear.i installed the bushing replacement 4 years ago and it works perfectly.

2006

plz lemme know

On the top ring

@@CARSONBOARD thank you sir!!!!!!! Hows the ride??

@@CARSONBOARD I just priced toytec springs 2 1/2" coil....$164.00 for a pair....I'm doing the same thing u did with the deaver AAL....thanks for ur help!!!!!!!

No sir you should!

@@CARSONBOARD one last thing on the rear shock do you use the bushing that were on the old shock or do you get new ones?

If they’re not in bad shape you can reuse them

Hell yeah 🇺🇲🇺🇲

I know now!

Nathan RL I think he’s done with that for now 😭

@@panda-wt5pq thats the only reason i subscribed 😅

Same here lol

Right now I’m more in to filming how to video.

Nope the stock one works great.