No video :(

Tailgate Antenna Mount Install and Wiring to Radio Mounted on a Jeep JL Wrangler CB BAR

Подписаться 220 тыс.

Просмотров 68 тыс.

50% 1

Hard mounting a full size CB Radio, HAM, GMRS or race radio along with a tall exterior antenna, is the best way to get good reception and have the greatest range. Fortunately, installing a radio inside a Jeep JL Wrangler is a piece of cake or at least, if you use one of my CB BARs and it can be just as easy to install an antenna on the tailgate, especially if you use one of my stainless steel mounts. In this video, you'll get to see how it's done as well as how to get the cable inside your Jeep and routed cleanly to your radio.
NOTE : This will work on a JK Wrangler as well but you will need to remove the tailgate hinge cover.
SUPPORTING VIDEOS
CB BAR & Aux Switch Installation Video: • Jeep JL Wrangler JT Gl...
CB BAR Installation Video: • Jeep JL Wrangler JT Gl...
WHAT YOU WILL NEED
CB BAR: www.wayalife.c...
CB BAR Switch Mount: www.wayalife.c...
JL Tailgate Antenna Mount: www.wayalife.c...
Antenna Stud Mount: amzn.to/3Pnyb1a
Coax Cable: amzn.to/3QqaxCz
60" Ground Strap: amzn.to/3K05BSz
M10-1.5x25 Bolt
M10-1.5 Nut
CB Radio Firestik II 3' Antenna: amzn.to/3c04MMV
or
VHF No Ground Plane Antenna amzn.to/3plTaah
NMO Style Base (adapter plate needed): amzn.to/3QsnDzi
TOOLS YOU WILL NEED
Torx T-25, T-40, T-55 Bit
15, 16mm Socket
5/16, 5/8" Socket & Wrench
Ratchet
1/4" Drill Bit
Hand Drill
Plastic Trim Pry Tool
Flathead Screwdriver
Wire Cutters
Pliers
Utility Knife
Pick Tool
Zip Ties
RECOMMENDED BUYS
Milwaukee 3/8 Electric Impact: amzn.to/3dxW48Y
Milwaukee Ratchet: amzn.to/2RaT7MT
Milwaukee Drill: amzn.to/3JTdetT
Tekton Bit Set: amzn.to/3TurMVg
Plastic Trim Tool Set: amzn.to/3gj1DnF
Pick Tool Set: amzn.to/3SPGQwn
Retractable Mic Holder: amzn.to/3SPEKwv
WAYALIFE SWAG STORE: www.bonfire.co...
Come visit us at: WAYALIFE.com
* Please note that the Amazon links posted are associate links and WAYALIFE does earn a small kickback for purchases made through them.
#antennamount #cbradio #jeepjl #installation #wiring #jeep #wranglerjl #jeepwrangler #jlwrangler #wranglerjl #wrangler #jljeep #wayalife #cbbar #pippi #pippiproject

Опубликовано:

24 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 221

@StormbornJKU 2 года назад

It always amazes me how I watch your entire video even though I don’t own a JL or a CB bar or anything even really related to the video haha The videos are just so relaxing to watch with how in depth and clean you make these installs look. Very relaxing honestly.

@wayalife 2 года назад

LOL - now that's funny but humbled to hear you say as much. Thank you.

@Coyote5555 2 года назад

Some of the best made videos on YT. I honestly wish they were longer sometimes, but excellent job overall. I do not have a need for a CB radio, but man now i know more than before.

@wayalife 2 года назад

LOL - humbled that you would say as much. Thank you.

@naterucker 2 года назад

@@wayalife Tis true@ The Wayalife videos are top notch!

@rodhester2166 2 года назад

Very well done and easy to follow for all the jeepers out there. It is so important to have alternate ways to communicate not only on the trial but even as a group heading to a destination.

@wayalife 2 года назад

Glad you found the video to be helpful to others.

@chellisdodge 2 года назад

I love my CB Bar, been using it for a year now. Works perfect. Thanks Eddie

@wayalife 2 года назад

Awesome! Glad to hear it 👍

@colonel_bobmontgomery1367 5 месяцев назад

Thanks so much for the info! I just ordered one of the Wilson Cables, they look so much easier than building my own which I have for years. Unfortunately the ground strap is out of stock so I will be making one of those. I am running the Wilson coax and a second control cable for my antenna out so I will be sealing that little plug after I reinstall to make sure no water gets in. Thanks!

@wayalife 5 месяцев назад

Happy to hear our video was helpful to you.

@JendellOverland 2 года назад

I used to have a CB, but we have switched over to GMRS. Same CB Bar, but do not have to use the antenna. plus the range is sooooo much better than CB. Great install video as always my friend.

@wayalife 2 года назад

Yup, a lot of folks are making the move.

@Verb130 2 месяца назад

Excellent grounding strap install.

@wayalife 2 месяца назад

Glad you found it to be helpful 😎

@nelen_co 2 года назад

For those of us with no one to talk to, the CB bar is handy for all sorts of things, from switches, to remotes, flashlight holders, etc.

@wayalife 2 года назад

Thank you for sharing as much. I've had a LOT of people tell me as much and I'm happy to hear it can serve multiple purposes.

@nelen_co 2 года назад

@@wayalife It's a good size for weapon rails to mount all sorts of quick-release accessories. I'll say no more :)

@tym3kill3r33 2 года назад

Great video! I’ve got to say you guys do a great job editing and producing your videos. They are always enjoyable to watch.

@wayalife 2 года назад

Thank you. We're truly flattered that you would say as much and glad to know you enjoy our videos.

@leavesthe9984 2 года назад

I have the CB bar also and absolutely love it. I did make one slight change and mounted my radio on top of the bar. My head hit the radio a couple of times so I flipped the radio to the top side. Everything still works great with it on top, freedom tops and sunrider soft top also.

@wayalife 2 года назад

Nice! Glad to hear you were able to get the radio to work on top of the CB BAR.

@zachpeters7096 Год назад

A MUCH needed Jeep accessory! Awesome solution, thank you!

@alessandroconcas 2 года назад

Great video, the only things I've do different are: for the fme terminal make a hole in the center of rubber plug and the ground strap invented the small terminal in the tailgate and sand the paint but all of this for my "obsession", the vid was already 100% perfect

@donmontalvo1 2 года назад

Another awesome video. I’ve got Ham, GMRS, and CB. The beauty of this video is that it applies to all types of radios. I will buy some Wilson cables, to make routing easier. Keep up the great work!

@wayalife 2 года назад

Glad it was helpful!

@erikstrieter4233 2 года назад

Awesome video. I used a cable with the normal end attached and had to run it thru the one way vents behind the spare. I mounted my radio by the shifter and it used every bit of that 18’ cable. I didn’t even think about running a ground, but will now.

@BennyTygohome 2 года назад

I really love the 2dr base model jl you've been using for these vids. very good simple to follow instructions. I used to take my jeeps to cb shop and wait for an hour or so for install. Now i think i can do this myself.

@wayalife 2 года назад

Awesome! Glad to hear we could be of help :)

@Burke_Motorsports 2 года назад

LOL. Having done it for years in big trucks, got my CB in my TJ. Then everyone in my area switched to GMRS. Had the coax mapped out for the CB so just followed that routing.

@zacwhitehead8053 2 года назад

Ok let’s call a spade a spade ♠️! This is the best Jeep channel !

@wayalife 2 года назад

Truly humbled and flattered that you would say as much, thank you.

@RunE076 2 года назад

Please never stop!

@wayalife 2 года назад

Making videos? If so, we'll do our best :)

@RunE076 2 года назад

@@wayalife your videos get me through hard times. Thank you

@dennisr7452 2 года назад

Another great instructional video. What I really enjoy is that you have a very neat, complete installation no matter what the project. You show what tools to use, tell us the sizes, torque specs, etc, very complete. I do have a question. Will the excess length of coax on a 2 door fit inside the plastic cover on the tailgate? Great video, thanks for posting. 👍

@wayalife 2 года назад

As a matter of fact, it will and that would be a good place to put it. Glad you found our video to be useful.

@boldrbangr9834 2 года назад

Great job & helpful info. I'm in the process of putting a CB in my JLUR & was concerned about getting a good ground. Looks like I fund the solution. Thanks!

@wayalife 2 года назад

Awesome, glad we could be of help.

@FourLowAdventures 11 месяцев назад

Your videos help me immensely. Just want to say thanks!

@wayalife 11 месяцев назад

Really happy to hear it, thanks!

@techitout-xy1xg Год назад

Finally had the time to install the wiring for the CB radio. Your instructional videos really helped and went pretty well. The only part I was not able to do was install the grounding strap to the tailgate. I used your tailgate mount and hardware and I seem to have same amount of thread like you had in your video but cannot get the nut to bite. Since I didn't have a longer bolt I installed the ground to the tailgate hinge door check. While it may not be the best direct ground for the antenna I'm wondering if it will be good enough. If not I may be getting a longer bolt and try that.

@wayalife Год назад

I'd be willing to bet it's good enough. And, very odd that you weren't able to get the nut to grab. First I've heard of it.

@roedere 2 года назад

The first mount I did on my 2021 4Xe was using existing hole in the heavy duty tire carrier (near hinge). Worked great until I opened my rear glass without opening the rear hatch fully and a snapped antenna right off. Not sure if your design easily clears the glass when opening or closes glass when gate not fully opened, but I had to do a custom metal mount that fits antenna directly in the center of spar. Now no issue with glass. Love your creativity!

@wayalife 2 года назад

Can't say it's been a problem for me but then, I don't think I've tried opening the glass without the tailgate fully open. Thanks for the tip though.

@richardlindgren2241 Год назад

How did you ground?

@roymichael851 2 года назад

So glad you post these videos, super helpful, thanks for taking the time to do them!!

@wayalife 2 года назад

Happy to hear you enjoy them and find them to be useful.

@sacredshogun6325 Год назад

Dang, that is an easy and clean installation. 👍

@wayalife Год назад

Glad you like what you see :)

@everrolmalcolm2933 Год назад

Great job installing the Cb cable..

@wayalife Год назад

Thanks! Glad to hear you approve 😎

@Shane7son Год назад

I love your videos. Can’t wait till you come out with a new one.

@wayalife Год назад

We're happy to hear you enjoy our videos and hope to have new ones up soon.

@fm71450 2 года назад

As always, excellent video. I also have the CB Bar, it installed perfectly and has been used for my GMRS radio. I like your rear antenna mount. Maybe time for 2nd (CB) radio! Thanks again.

@wayalife 2 года назад

Awesome! Glad to hear you're liking your CB BAR

@Mck499 2 года назад

Great video! I'm looking for my first Wrangler, I'll have to add this to the mod list when I get it 😆

@wayalife 2 года назад

Awesome! Glad that we could be of help.

@stephen6ipa 8 месяцев назад

One of the best video on youtube!

@wayalife 8 месяцев назад

Flattered to hear you say as much, thank you :)

@chuckzechman1497 2 года назад

Nice video. Always interested in comms for the Jeep. For my installed mobile I've gone with a TYT9800 amateur quad band radio (programed to receive GMRS, FRS, and MURS as well as my licensed VHF and UHF transmit frequencies). I also have portable GMRS/FRS (licensed), MURS and CB radios in addition to my county P25 radio for HazMat and Fire response (if you ask my wife she'll tell you I have a problem). Safe Travels and God Bless!

@wayalife 2 года назад

Nice!

@ricardosantiago7694 Год назад

Very clean job

@wayalife Год назад

Thanks 👍

@utahyork3338 Год назад

Hope things are OK, Eddie? I enjoy your videos.

@wayalife Год назад

We're happy to hear you enjoy our videos and apologize for the lack of them lately. We're okay but do have a lot going on right now. We hope to get back to them again soon. We appreciate your concern and support.

@shanehanson1268 Год назад

Very well done thank you! 🤘

@wayalife Год назад

Glad you liked it!

@gearlist 2 года назад

Great tutorial! Thanks, will be doing something similar on our rig!

@wayalife 2 года назад

Glad it was helpful!

@woof3598 2 года назад

nothing like working on a new Jeep. hit up 4 different dealers today, lot of trucks no Wranglers

@wayalife 2 года назад

Supply is really scarce these days.

@storytrailing 2 года назад

Same!!! I’m just gonna order one and wait at this point.

@Mck499 2 года назад

If your from Pittsburgh area check out Charper. They've got a number of JL's JLU's & JT's

@woof3598 Год назад

@@storytrailing thought about that, December ?????

@johngrant1337 2 года назад

Great Video, a product that is simple and works Thanks

@wayalife 2 года назад

Glad to hear you like what you see :)

@agentofspecter1 2 года назад

You need a TJ or LJ in your corral. The JL is by far my favorite Wrangler, but The Tj was my first wrangler, and man, i loved that truck. Off topic, but I was admiring your cover pic.

@wayalife 2 года назад

Had a TJ for 10 years and would love to have another again. People just want way too much money for them these days and I'm not paying that much for an old Jeep.

@agentofspecter1 2 года назад

@@wayalife you're not wrong about that. I was actually looking for an older TJ Rubicon for my wife, but the prices are crazy. Might as well just buy her a jk. Thanks for always responding, my friend. Huge fan of your channel

@BashamOffroad 2 года назад

Great video! Looks like an S-Pod up there also.. did we miss something?! 🤣

@wayalife 2 года назад

Switch Pros and you can see a previous install of it here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Qi79fJoUqSw.html

@chrislarsen1033 2 года назад

Great how to video brother. As always please say hi to Cindy

@wayalife 2 года назад

Thank you my friend. Will do and hope you and your family are doing well.

@terryderush2657 2 года назад

Great 👍 job but I already beat you on this one. Thanks again for the CB bar.

@wayalife 2 года назад

Awesome 👍

@davidbishop4015 2 года назад

Nicely done. Stay safe.

@wayalife 2 года назад

Thanks, you too!

@movingtonashville 2 года назад

thank you! I'm getting ready to do this exact thing, I was going to do the front mount but I think I'll do rear after watching the video. About how long will this take to do?

@wayalife 2 года назад

Sorry for not responding sooner. You can do the whole install in about 1/2 an hour or so.

@ryannewazada2102 2 года назад

Aloha and good 👍 afternoon 🔅 Eddie. This is a fantastic mod that you completed with ease and simplicity. Nice installation indeed.🤙👌🤲👐🙌🌟🔅🔍📼👍🐕😎🤠🤓💫💥👉🏼👈🏿🎓🏡💰💃

@wayalife 2 года назад

Thank you :)

@subsonnicphotography8028 2 года назад

Great site, great info! Do you foresee any problem installing the mount to the lower hinge plate? For longer antennas?

@wayalife 2 года назад

Nope, no problem in doing that and lots of people do.

@keon8625 2 года назад

What gear do you keep in that cubby? It looks pretty well packed! Also, the beat of the music matching the electric ratchet is pretty clever.

@wayalife 2 года назад

Glad you liked our editing. Typically, I carry a strap, tire repair kit and tire deflator in the cubby.

@tym3kill3r33 Год назад

Where have you been? We miss you…

@wayalife Год назад

We apologize for being MIA. Just have a lot going on right now but hope to get back at the videos soon.

@johnanthony6141 Год назад

Thought GMRS was the new thing? CB sure is nice when traveling and being able to listen to the truckers. Wonder if they’re gong this route yet?

@wayalife Год назад

GMRS is the new thing but I don't think trucks are using them because you technically need a licenses to operate one.

@Roberto68n 2 года назад

Tekton bit set link not working. That’s what you used with the Milwaukee ratchet? That’s exactly what I need!

@wayalife 2 года назад

I appreciate the heads up. I updated it with this amzn.to/3TurMVg

@josephgarza467 Год назад

I had problems getting a ground bound between the Mopar HD tailgate mounting screws and your NMO adapter plate. In fact, on my 2023 Extreme Recon Wrangler, there is no continuity between the upper hinge, the original hardware and the chassis. I had to run ground braid in parallel to the antenna cable, through the drain plug, through the tailgate and followed your video's recommendations for grounding to the chassis. Has anyone experienced this?

@wayalife Год назад

If you're running an NMO style antenna, I would recommend that you install a no ground plane antenna.

@andrassampar8670 Месяц назад

How is the SWR? Did you measure?

@brentsecord3016 9 месяцев назад

Where are you getting into the passenger compartment with the coax?

@Vlogtv-vf7rg Год назад

Thanks waya

@wayalife Год назад

Glad we could be of help to you with this :)

@oliverleclere1829 2 года назад

That was clear enough!

@wayalife 2 года назад

Awesome

@mattwolfe1824 2 года назад

Great video! Have you ever considered making a bracket for the GMRS NMO antenna mount? I haven’t found any that attaches to the tailgate hinges yet.

@wayalife 2 года назад

So, I run a NMO antenna on my mount but made an adapter to make it work. If there is enough of a demand, I will try to make the adapter available for sale as well.

@osamaelhawat2766 2 года назад

Fabulous job ✨✨✨

@wayalife 2 года назад

Glad you liked what you saw :)

@chrishoiland7337 Год назад

Awesome video as always. I have the tailgate reinforcement on my jl with the mounting location that is provided. The problem is it's thicker than your mounting bracket for the antenna and I don't have enough threads to get the plastic washer and lock washer on. Do you know of an antenna coupler with longer threaded portion? Suggestions? Thanks in advance. Love your videos.

@wayalife Год назад

There are different types of mounts and ones that use a bolt like stud. I would recommend that as you can use a longer bolt if needed.

@dantewells8486 2 года назад

Do you make antenna mounts for the jeep gladiator JT (to locate in the gap between the tailgate and the cab)? If not what would you recommend? What antenna would you recommend? Lastly does the CB radio brand have to match the antenna? Thanks! Love your videos! So much help!

@wayalife 2 года назад

I'm working on it and hope to have something available soon. I personally like Firestik II antennas and have it linked in the description. also, they do not have to match.

@dantewells8486 2 года назад

@@wayalife Thanks!

@davidwheeler1449 2 года назад

Hey I might sound stupid but I’m looking to buy a jeep what is the best year to buy

@wayalife 2 года назад

I suppose that depends on if you're looking for an older JK or a newer JL. If older JK, I would say 2014-2018. If a newer JL, I would say 2019-up.

@twoj1220 2 года назад

Good job~👍

@wayalife 2 года назад

Thank you :)

@er89FAMOUS89er 2 года назад

Could the mount also be able to be mounted to the door brackets? I don't know why but i think that'd be pretty cool!!

@wayalife 2 года назад

Not with this bracket.

@willie6961 2 года назад

Hi, always great content videos, out of the line. A word about the 2.0 vs 3.6 both manual, about long term reliability. Just normal use 90% road. Any advice will be highly appreciated. Thank You...

@wayalife 2 года назад

Unfortunately, you cannot get the 2.0 with a manual, only the 3.6

@edmitch3557 Год назад

Watching your video you attached a ground strap. How long does it need to be

@wayalife Год назад

I have a link for it in the description but here it is now amzn.to/3K05BSz

@DDAVO7 7 месяцев назад

Eddie, do you make an antenna mount that will fit on the JL with the Xtreme Recon package? As you probably know, the spare is bigger and it is equipped with the Mopar tailgate reinforcement. Thanks, and I love your channel!

@wayalife 7 месяцев назад

The Mopar reinforced tire carrier already has a place for you to install an antenna ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ngr7HsSj_pQ.html

@DDAVO7 6 месяцев назад

Thanks so much!

@marcoramirez2703 2 года назад

Why is that you don’t have a TJ? 😅 I will love to watch one in your channel

@wayalife 2 года назад

We did for 10 years and then sold it due to lack of room (at the time). Now, people want stupid money for them.

@marcoramirez2703 2 года назад

@@wayalife yes that’s sad 😢 I hope you find one cheap for the channel 😃

@sensiblenomads 2 года назад

Curious why you didn’t drill the 1/4” hole in the rubber plug and run it directly through without making a slit on it? Would make for a better seal, although for the most part will still work pretty decent

@wayalife 2 года назад

The hole created is ultimately a LOT smaller than a 1/4" and trying to shove the mini end through it is near impossible. The hole is made so that it exists but still has a tight fit around the cable. The slit is completely sealed once reinstalled. But hey, feel free to do what you think is best on your Jeep 👍

@delbancroft9339 2 года назад

Why didn't you flip the bracket over and use the left bolt to hold a relief strap for the co-ax cable? Also protects the lower half of the base and raises the antenna a few inches for better ground plan.

@wayalife 2 года назад

Maybe try watching the video and listen to why I installed the bracket the way I did 😎

@delbancroft9339 2 года назад

@@wayalife I watched the video, then asked the question

@wayalife 2 года назад

@@delbancroft9339 LOL - well, I did answer your question, at least part of it. Maybe watch again or better yet, do what you feel is best for your Jeep 👍🏻

@GaryGill786 Год назад

Hi sir , I have the antenna and flagpole bracket installed on my Jeep tailgate bracket…. From where I can buy the antenna and flagpole please

@wayalife Год назад

I guess it depends on what kind of antenna you're wanting to run but I'm sure you can buy both on Amazon or the like.

@rickywhite977 Год назад

I want 2 cb antenna and one antenna for a scanner

@tonywaters4896 2 года назад

CB Bar looks nice but I can't figure out why everyone think that the rear tailgate makes a great place to put an antenna? There is no flat ground plane to reflect the signal off of. If you want to transmit with any distance, you need to use a fender mount bracket so you get refection off the flat, horizontal hood's ground plane.

@wayalife 2 года назад

@Tony Waters It's where Mopar puts their mount on their reinforced tire carrier. And really, I've never found it to be a problem communicating with the friends I'm wheeling with. If they're really so far away that I need greater communication range, I'm not really wheeling with them. But hey, that's just me.

@droid683 2 года назад

Why not eliminate cutting the slit in the plug by just feeding the cable through the 1/4” hole you drilled? I feel like it would be more weather tight that way.

@wayalife 2 года назад

The hole created is ultimately a LOT smaller than a 1/4" and trying to shove the mini end through it is near impossible. The hole is made so that it exists but still has a very tight fit around the cable. Also, the plug is still difficult to put back in and that makes the slit completely sealed and weather tight once reinstalled. But hey, feel free to do what you think is best on your Jeep

@Laurel-503-drywall 2 года назад

La dirección

@mikeweber3441 2 года назад

So…dumb question alert. When modifying the tailgate plug to accept the cable, is there an advantage to drilling a hole and then cutting or can you just drill a hole and run the cable through? Just curious! As always, great content and thank you for walking through all the steps with such great info!

@wayalife 2 года назад

The end of the cable is bigger than the cable. You could drill a bigger hole to fit the end through it but then, the hole will most likely be too big and will let in dirt and debris in the tailgate.

@MRBIG-lg9zl Год назад

Will this setup clear a 35 inch spare on the factory mount? Thanks

@wayalife Год назад

I suppose it depends on what 35" tire you're running and what wheel you have it mounted on and how much back spacing it has.

@philbrennaman4572 2 года назад

Very nice.

@wayalife 2 года назад

Thank you! Cheers!

@borneorcfilm 2 года назад

great 👍🙏🏻🙏🏻

@wayalife 2 года назад

Thank you 👍

@smokeGR14 2 года назад

Please check the first 2 links..cb bar an mount..links don't work..only the amz links work..thanks

@wayalife 2 года назад

Thank you. I've had others inform me of that. Please try it now.

@RK-kj8di 2 года назад

Hey Eddie, what is your current recommendation for a CB radio?

@wayalife 2 года назад

I like the Uniden BEARCAT 980: amzn.to/3C6l0ij

@deidara7117 2 года назад

Eddi i’m ordering a jeep JL but have been reading about corrosion on door hinges in as little as 1-2yrs. Being as you own several and know more people who own them than me, I wanted to ask if it something you see often?. Should i be concerned.. the thought of canceling the order has begun to cros my mind… Ty

@wayalife 2 года назад

Honestly, I have not had this problem on any of the 4 JK's (1 I still have and it's a 2007) that I've owned, the 3 JL's (2 I still own) that I've owned or even the JT that I own. This goes for all my friends as well and over the last 20 years. I know there have been some instances where it has occurred but there are far fewer instances than the internet will have you believe.

@deidara7117 2 года назад

wow my lunch break isn’t over yet ty for the reply lol. The wait continues 😁

@josephrolando7842 2 года назад

Do you make a bracket with a NMO size hole?

@wayalife 2 года назад

I do not as the mount is too thick for it. I have been working with making an adapter that can be bolted to it though and it works well. I hope to have it available soon.

@jmanlevan Год назад

Have any of your JL/JT jeeps had any issues with paint bubbling due to corrosion around the hinges of the doors, hood and tailgates? Are you aware of this seemingly widespread problem? I’m a huge fan of your videos, have always been a Toyota fan but am interested in jumping into the Jeep world, with a lot of that due to your videos. But as I do more research before pulling the trigger on buying a Wrangler, seems like a lot of people who own the current gen Jeeps seem pretty disappointed with the Jeep paint on their wranglers and gladiators in the areas I mentioned.

@wayalife Год назад

LOL - a few hyped up posts on the internet doesn't necessarily mean something is a "widespread" problem. NONE of my JL's or JT has this problem nor do any of the ones my friends have or members of my forum have it. Not saying it's never happened to anyone but with almost 1 million JL's out there, I think I would have seen or heard about a few more instances if it were truly a widespread problem.

@jmanlevan Год назад

@@wayalife thanks for the reply! Good to hear you and those you Jeep with haven’t had any issues! Thanks for putting out awesome content!

@emt270862 10 месяцев назад

I have a 2019 Rubicon and have this very issue. Very disappointed considering the cost. I still love it, but...

@JohnnyMcFLY100 Год назад

Hey there!! Big fan of your videos! I had a question about the issue you had with Moby’s manual trans before you opted to swap for the LS. I have a 07 manual trans as well with the same issue you had. Any idea what the issue was?

@wayalife Год назад

In the end, the real problem was with the ring and pinion on our PR60 rear axle. Didn't find it until after we were doing the swap.

@JohnnyMcFLY100 Год назад

@@wayalife Thanks a lot, I have a stock 44, I didn't even consider that the noise may be coming from the diff. I'm getting my clutch replaced as we speak. If I still hear the noise I will inspect that next. Thank you so much for sharing!

@JohnnyMcFLY100 Год назад

@@wayalife Update, I ended up having the exact same problem a broken ring and pinion :) Thank you so much for helping me out!!

@fuzzd0rk Год назад

Where else can I find that 60" ground strap? It's out of stock on Amazon, and the only others I can find are 15" - 24".

@wayalife Год назад

Hmm. Well, I see they still have a 48" amzn.to/3L8XmnQ This can be attached to the lower hinge bolts and it will work too.

@fuzzd0rk Год назад

@@wayalife Perfect thanks! Not sure why that wasn't coming up in my search. Will four feet be enough?

@wayalife Год назад

Like I said, if you connect it to the lower hinge bolts, it will. This, as opposed to the upper ones like I did. You just need to make sure to clean the threads of paint.

@fuzzd0rk Год назад

@@wayalife Thanks for your help.

@KILLER_BEAN_UNLEASHED_FOREVER 2 года назад

👌👍

@peterpankonin6993 2 года назад

Wondering if the paint on that tailgate hinge is insulating the ground strap somewhat?

@wayalife 2 года назад

The ground strap is attached directly to the new hinge bolt.

@peterpankonin6993 2 года назад

@@wayalife OK, yeah I see. Direct on it looked like the ring connector was only making contact with the red flat part and the nut, but you did pull it down to contact the bolt. Thanks.

@lucifer0001 2 года назад

Is your antenna bracket strong enough to hold an eight foot stainless whip? Can your CB radio mount hold more than 1 radio? I saw a splitter switch to feed 2 radios with one antenna . Also, can you put rear sway bar disconnects on the rear of your Rubi?

@wayalife Год назад

I would imagine so but I have not personally tested it so I can't say for sure. Regarding the CB BAR, yes, there are lots of guys who are running multiple radios on it. As far as sway bar disconnects go, you do NOT want or need to disconnect the rear. The factory sway bar is soft enough that it will not limit flex. The stability that it provides is something you should want.

@realbob6669 2 года назад

On my JL did same kind of installation and worked out with speaker wire as ground. My friend has a 4xe and unable to calibrate CB. Could it be speaker wire or batteries interfering?

@wayalife 2 года назад

Hard to say for sure without seeing how he has everything setup. A lot of times, the nylon washer is installed wrong and that is the problem.

@realbob6669 2 года назад

@@wayalife What do you mean washer not installed correctly?

@wayalife 2 года назад

@@realbob6669 As I show in the video, the nylon washer NEEDS to be installed with the inner step sitting IN the hole of the mount. This isolates the threaded part of the stud. If you do not do this, you will have issues.

@getonss 2 года назад

Is your mounting bracket compatible with the Weboost OTR antenna? I’ve been trying figure out a mounting solution for a while!

@wayalife 2 года назад

Unfortunately, I don't know for sure but if you can cut a piece of steel and drill a hole in it, you can make an adapter and bolt it on to the mount to make it work. I've had people with different types of antennas do this.

@DUNEATV 2 года назад

Odd question sir….When you remove those painted bolts does it break up the paint on the bolts? I want to realigned my passenger door but I’m afraid to damage the paint on the bolts.

@wayalife 2 года назад

In the torx head, the paint will get marred a bit from the tool. The bolts will break free of the hinge clean and there is no paint in between the hinge and tailgate.

@DUNEATV 2 года назад

@@wayalife What about on the doors?

@wayalife 2 года назад

Same thing

@DUNEATV 2 года назад

@@wayalife Thank you so much! God bless you…

@raymondwinans978 2 года назад

Why a CB ? Why not and GMRS ?

@wayalife 2 года назад

CB's are affordable, can be found anywhere and easy to setup and use without a license. For any trail run with friends, it's all you really need. That said, I would always recommend that you use whatever your friends are running.

@alfredmartin4736 2 года назад

Tried to open site for mount and 401 error will not open

@wayalife 2 года назад

Please click on this link www.wayalife.com/store/proddetail.php?prod=PARTS-CB-ANTENNA-MOUNT

@royhale7283 Год назад

Eddy are your jk engines stock or are the modded

@wayalife Год назад

Our 2007 JK has a 6.2L LT under the hood.

@royhale7283 Год назад

@@wayalife OMG. I just bought my first Jeep 2013 unlimited Sahara. I just put 32/11.5/ 17s off a 2022 Gladiator, your videos are inspiring to what can be done. Love the videos of the places you go. Really like your rigs, I can’t wait to get a 2” lift on mine. Keep the videos coming.

@chillis28 2 года назад

👍👍

@francoisdionne1969 2 года назад

Where you have mount your antenan on your Gladiator ?

@wayalife 2 года назад

I made a bracket and have it mounted to the bed. I will try to make a video of it sometime.

@francoisdionne1969 2 года назад

@@wayalife Cool !!! Thank you very much !!!!!

@zeq.martinez 2 года назад

Did you guys end up selling your rubicon JLU?

@wayalife 2 года назад

We did but we did replace it with this ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-siJWI3ql9ZU.html

@zeq.martinez 2 года назад

@@wayalife oh I saw it already, I watch your vids ALL the time!

@zapman2100 2 года назад

This is the worst place to mount any antenna, if you want proper reception and antenna use it needs a flat plane near it for good signal, like a hood or flat roof.

@wayalife 2 года назад

Umm, this is a Jeep Wrangler. It has no roof. Mounting on the hood is an option but it looks lame. While this may not bet the 'best' location, I have no need to talk to strangers half way around the globe. For my purposes, I have found this location to work exceptionally well and have had no issues communicating with everyone that I'm wheeling with.

@rachelwhite4449 2 года назад

Perfect location. 👍🏻

@wayalife 2 года назад

@Rachel White Well, it's where Mopar puts it. 😁

@keon8625 2 года назад

For trail use, it's fine. You are rarely too far from those that you are communicating with. I get that in an emergency situation you want more range, but in my experience wheeling, the only people who are within the range of a few kilometers is the group you are wheeling with, and no one else.

@wayalife 2 года назад

@Keon exactly. Also, typically, I'm the guy people call on in an emergency as I typically have everything needed to help out. And, if I'm by myself and need help, I use my InReach satellite communications device. Other than that, there is no need to talk to anyone outside of my immediate group.