No video :(

Tamiya CC02 Chassis Build Guide + Options Explained + Tips Part 1

Подписаться 14 тыс.

Просмотров 1 тыс.

50% 1

In this video I show how to build the first 13 steps of the Tamiya CC-02 off-road chassis. There are several options included in this build and I will explain what those options mean to the finished chassis and other build issues to watch out for.
I particular this guide covers the gear ratio options and the servo mounting options.
Although this CC-02 will eventually become a Ford Bronco, the guide will apply to all Tamiya CC-02 kits.
Many thanks again to ‪@RCJunky‬ for donating this fantastic kit to the channel.
I hope you find this video useful and if you have any questions please leave them in the comments below and I will endeavour to answer them.
Happy RC building! 😎👍

Опубликовано:

20 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 75

@bramskahoon4072 Месяц назад

Your build video instructions are awesome!...I ditched those ones that have time lapse and music. You're a legend Bryan!

@MarkBryanRC Месяц назад

Woah! That's high praise indeed and I thank you very much Sir! Yeah I don't prefer a time lapse build video myself. Thanks again and all the best! 😎👊👍

@AddamsPlayground Месяц назад

Gluing those nuts in place is key, it is a fiddly pain in the rear if you don't! Not that I learn things the hard way or anything LOL!! Great job on the build guide Mark, I am sure it will be helpful to others for sure!

@MarkBryanRC Месяц назад

Haha 😄 thanks mate, yeah you gotta make sure you get your nuts in the right place 😉 😜 same here though buddy, always learning the hard way! Thanks for the kind words, much appreciated Addam! I try to make these guides as helpful as I can. Cheers 🍻 😎👍

@MauzyrockRC Месяц назад

So much better than the CC-01 it seems. Thanks for the great info!

@MarkBryanRC Месяц назад

Thanks dude! Yep, this is a classy chassis, fiddly to build but fun all the same. Cheers bro! 🍻😎👍

@theoagrc Месяц назад

Hey Mark, great video as always mate. Nice watching a “build along with Mark” for us all to dream about future RCs buddy! I had one of these at one point but I was put off by the idea of all those glued washers!! Can’t wait to see what you do with that Bronco body fella!!

@MarkBryanRC Месяц назад

Haha 😄 that's awesome mate 👏 👌 I think I might rename these vids as "Build along with Mark" 🤣 Yeah the gluing is a pain in the bum! And I'm bricking it about doing the body mate, looks very complicated 😅 👍

@thecontractor365 Месяц назад

Ahh, so you're going for a gearing option to create a fast Bronco - you're a total speed demon bro, why am I not surprised..😂. It's good though that you have the option down the road to slow it down again. With the slower gear option, I wouldn't call this a crawler ( compared to an Axial ), but it's certainly a very competent trail runner. Excellent stuff Mark...👏👍🏻🙂.

@MarkBryanRC Месяц назад

Thanks mate! Hehe well you know me too well my friend 🤪 fast and furious!!! I also enjoy the left-field approach and going against the grain! No I wouldn't call this rig a crawler either but I'm sure it will have a go at a few tricky paths and provide some challenges that will be fun. Hope you are having a great Sunday, dude! 😎👊👍

@Paul__FC Месяц назад

First!!! Ya baby , yaaaaaay! How does he do it!

@MarkBryanRC Месяц назад

I gotta give it to ya dude, fast off the mark today! 😲👌

@aviano72 Месяц назад

this will be great to follow. Can't wait for you an McRob's CC02 speed competition

@MarkBryanRC Месяц назад

Thanks Are! It might be a while before that speed comp with McRob, but we will do it I promise! I have a lot of work ahead with the build and the filming - and that body is going to be a nightmare to do!!! 😵‍💫😅👍

@aviano72 Месяц назад

@@MarkBryanRC The bodywork i know will be amazing, as you always do a great job 👍

@MarkBryanRC Месяц назад

Thanks mate, but I'm still worried about that job! I'll do my best! 😎👍👍

@madsrcbuggy Месяц назад

It's a nice guide, Mark! I like the slightly higher pace in it, great editing! Yeah, important advice, check ahead and consider the options. I have to admit I have made a few mistakes by now, not paying attention to those. But as you said, can always go back and change again, he he...

@MarkBryanRC Месяц назад

Thanks Mads, yeah I tried to keep the pace up so you didn't fall asleep! As you know it takes bloody ages to edit a video like this. But yes, the beauty of building a kit is that you can always go back and make changes and there are quite a lot of options for this truck which makes it all the more interesting. Cheers mate! 😎👍

@RCBirds Месяц назад

Great video Mark. Would be nice, they'll do a shifting version for the gears. Keep the bushings aside. This'll be the only currency after the apocalypse😂😂😂 I like component chassis. They somehow look more professional than the bathtubs

@MarkBryanRC Месяц назад

Thanks Dirk! A shift gearbox would be a good option for this truck! Haha, I hope the bushings are worth loads after the apocalypse, I've got hundreds of them!!! 🤣🤣 All the best my good friend! 😎🤝👍

@opctje666 Месяц назад

Nice build Mark . I love the cc02

@MarkBryanRC Месяц назад

Many thanks Dennis! Glad you liked it my friend. I'm looking forward to the first run already. Cheers! 🍻😎👌👍

@glynjackson420 Месяц назад

Great video as usual well explained step by step thanks Mark

@MarkBryanRC Месяц назад

that's very kind of you to say, Glyn! Glad you enjoyed it pal. All the best! 😎👊👍

@RCJunky Месяц назад

Enjoy the build Mark

@MarkBryanRC Месяц назад

Thanks pal! Oh yes I'm really getting into the build, it's very different from any other Tamiya I've done. A bit fiddly in places but that just adds to it for me. I'm a bit slow getting going on it but I've had a few health and family issues, so this really is a wonderful distraction when I get some time to spend on it. This is going to be a cracking little trail truck! Cheers!

@barrycheesemore2928 16 дней назад

Brilliant stuff, I always love your build videos!!

@MarkBryanRC 16 дней назад

Thanks a ton Barry - great to hear! I was in my element building this cool Tamiya! Cheers! 🍻😎👌👍

@barrycheesemore2928 16 дней назад

@@MarkBryanRC Watching the videos has got me tempted to get a CC-02, but I can't really afford it, I spent waaaay too much on my Mega Clod Buster🤣🤣

@MarkBryanRC 16 дней назад

@@barrycheesemore2928 You can always get one later, this one ain't going out of production soon! That Clod sounds awesome though! 😎👌🤘

@UncleBobsRC Месяц назад

Last??? Super cool build Mark!!!!!!

@MarkBryanRC Месяц назад

Almost! You can't be last Bob - you would have to make a video wearing a pair of budgie smugglers!!! 🤣😬👍

@UncleBobsRC Месяц назад

@@MarkBryanRC I don't think they make them big enough!!!!!! 🤣🤣🤣🤣

@MarkBryanRC Месяц назад

@@UncleBobsRC 🤣🤣👍👍

@yodadarksideGreenHawksRC Месяц назад

I do enjoy a build class with Mr Bryan! This looks like quite a deep build matey, which is always a great experience. I'm not suprised that you are going with the fastest gearing..... I think I would have done the same mate! Regarding the meshing of the pinion, I always sandwich a piece of paper between the gears and rotate..... I find this creates the perfect mesh- not too tight, not too loose..... Just how we all like it! 😉 😂 Enjoying following along on this one fella, hope alls well up your way! 👍 👍 👍

@MarkBryanRC Месяц назад

Thanks for the awesome support and comments, James! It's a fiddly build for sure is this one but I'm really enjoying it, it makes a change from most other Tamiyas I've done so far. Gotta go for the high speed and SEND IT!!! I have used paper to set the mesh before but now I prefer to do it by eye and feel. Horses for courses! Hope all is good with you too mate - cheers! 🍻😎🦫👍

@PeteWylieRC Месяц назад

Hiya mate. Ah yes the master of the build video strikes again! This is a rather complicated kit and lots of top tips from you along the way. I think that this is more of a crawler chassis than the CC-01 so it's probably not going to be one for me but interesting to see how it goes together. I like that you've gone for the faster gear ratio so you might get a bit of decent speed. I look forward to seeing it all done. Really nice body shell on this one. Top work so far. Best wishes mate 😁👍👍

@MarkBryanRC Месяц назад

Hi there my mate Pete! You are being too kind mate but thanks all the same! Yeah I think this is definitely a step up from the CC01 in terms of quality and design but not sure it will crawl much better, hence the speed option, I may even put a faster motor in it and send it over a few jumps, just for the hell of it! That body is scaring me at the moment just sat in the box, looks super tricky to do properly. Fingers crossed. Hope your slobby day is going well, I'm joining you with a laid back Sunday. Beers coming up very soon... cheers! 🍻😎🦫👍

@catcancrunch7260 Месяц назад

Another great build on the way, thanks for your upload mate 👍🙏🐱

@MarkBryanRC Месяц назад

Oh yes Cat 🐈 this is a lovely kit to put together! Definitely different but cool 😎 Many thanks for watching my friend. Hope you're having a great Sunday 👍 👌 😊

@kimpestridge6668 Месяц назад

Another great video Mark 👍hope you have a lovely weekend 😊

@MarkBryanRC Месяц назад

Thanks as always Kim, you too, I hope you're having a wonderful Sunday! Cheers 🍻 😎👌👍

@poorboysrc Месяц назад

You're too fast, Paul! 😂 Have fun with the CC02, Mark! What a great rig!

@MarkBryanRC Месяц назад

Haha 😄 yeah Paul was quick off the mark!!! I'm already having fun building this kit mate, I know how much you enjoyed yours! Cheers 🍻 dude! 😎👍

@BigDumbMeRC Месяц назад

Love the build vids. Fun to experience the build by proxy lol

@MarkBryanRC Месяц назад

Hi Christian! Glad you enjoyed it, I certainly did! Haha - build by proxy - love it! 😁👊👍

@scaleworksRC Месяц назад

Complicated, but it looks like it should handle some tough trails! Nice one as usual, Mark!

@MarkBryanRC Месяц назад

It is a fiddly build, pal, but enjoyable all the same! Hopefully it will drive as well as it looks. Cheers 🍻 buddy 👍

@MadBeeRC Месяц назад

Late to the party Mark but l am here now! Hello mate, These are nice looking kits interesting build and love how they look! See you in the next episode my friend 😉👍

@MarkBryanRC Месяц назад

Fashionably late though James! I'm just glad that you watched and left a nice comment though mate! Yeah this is actually a great kit to build 👌 and the body is going to be more work than the chassis!!! Take care my good friend! 👍 🙌😎🤝

@broggsey Месяц назад

I haven’t built anything for a year or so kinda lost my motivation when I got to 10 or so cus it’s stressful enough keeping them all running right and remembering what’s going on. Never had anything like this tho, just buggies really so waiting to see if I get inspired by your build

@MarkBryanRC Месяц назад

Hi John, I hope the motivation returns for you! I know what you mean though, it's hard to keep a small fleet of RC's running well. Yeah, this kit really is a bit different, it's a fiddly build but I'm enjoying it all the same. All the best from Mark.. 😎👍

@BasBoyRC Месяц назад

Yes, build 🙂 with the gearing a CC02 speed challenge. Good you got rid of the two worse things is a Tamiya kit, bushings and pinion. Gluing bits so annoying, you used the glue I would use. But nice Tamiya complexity.

@MarkBryanRC Месяц назад

Thank you Mal! Yes it will be fun to have a go with the high gearing, I imagine a few roll overs are coming up! 😀 Those bushings and pinion are destined for the bin! I'm glad I got all the gluing done before the build, much less faffing about! All the best my friend! 😎👌👍

@BasBoyRC Месяц назад

@@MarkBryanRC Would have been a pain filming waiting for the glue to go off.

@MarkBryanRC Месяц назад

@@BasBoyRC Haha, yeah a video as interesting as watching paint dry!! 🤣🤣

@BasBoyRC Месяц назад

@@MarkBryanRC And what is wrong with watching paint dying 🤣🤣

@rc-dom-uk Месяц назад

i think mines low geared but its still quite quick . the nuts are annoying and its a shame the frames aren’t metal . but it’s a nice scale kit 👍

@MarkBryanRC Месяц назад

Hiya Dom! Yeah Tamiya seem to gear their trail rigs way too high! So I thought I'd have a bit of fun with it in high speed mode, I've never seen a CC02 jump yet!!! 🤣✌😅👍

@rc-dom-uk Месяц назад

@@MarkBryanRC why not 😂👍 i’ve got mine reasonably slow with a 35t . good trail speed snd got nice low torque feel

@MarkBryanRC Месяц назад

@@rc-dom-uk Thanks mate, I'll bear that in mind after I've sent it over the jump stumps! 🤣🤣👍👍

@cutterbacon Месяц назад

11:09 I dont like that at all. That shaft couldnt build it like that.

@MarkBryanRC Месяц назад

Hi there. Was that when I was setting the pinion and spur mesh? How would you do it, I'm open to any advice if you got it!

@cutterbacon Месяц назад

@@MarkBryanRC Mesh it how you fancy no issues but the motor shaft only going half way through the pinion i didnt like that.

@MarkBryanRC Месяц назад

@@cutterbacon Ahhh I see what you mean! No I didn't like that either but there is nothing I can do about it. For the end of the pinion to be set at 14mm from the motor to mesh correctly, that's how it is with the stock Mabuchi motor shaft. I'd need to find another motor with a longer shaft. Cheers and thanks for noticing!

@cutterbacon Месяц назад

@@MarkBryanRC Traxxas 550 have long shaft if 550 fits in chassis

@MarkBryanRC Месяц назад

@@cutterbacon Thanks for the info - yeah I think a 550 might just squeeze in there! 😎👍

@outbackrcaustralia4895 Месяц назад

G'day Cobber!🤠👧. Good to see you've got your nuts securely in place where they belong 🫢hehe. That's a really nice looking chassis mate👌. We hope you're having a fantastic weekend Cobber and g'day from Sheila and I👍🦘🇦🇺

@MarkBryanRC Месяц назад

G'day my awesome Aussie mate! Hope you and the lovely missus is doing OK! Haha, yeah you gotta make sure your nuts are secure, Mukka! It is a great chassis and I'm totally enjoying the build. My weekend was topper my friend, wishing you and Sheila a cracking week ahead! 😎👊🦫👍

@outbackrcaustralia4895 Месяц назад

@@MarkBryanRC Thanks our Mukka 👍, Sheila says hello Mark👩. Glad you're doing well mate.

@MarkBryanRC Месяц назад

@@outbackrcaustralia4895 😁😁🍻🍻🦫🦫👍👍