No video :(

Tamiya Rock Socker CR-01 Step 13 Steering Servo

Подписаться 737

50% 1

Hi RC Enthusiasts
Welcome to my channel and thank you for taking the time to view this video.
This is the Tamiya Rock Socker on Tamiya's answer to a crawler chassis. This awesome model comes as standard with a 540 size motor, a single speed centre gearbox, the ability to choose to have locked / unlocked front & rear axle differentials, front & rear barrel spring, with separate oil shock absorbers, metal chassis rails, four link front and rear chassis links, soft tires and detailed plastic bead lock wheels, the ability to choose to have the optional four wheel steering option, part ball bearing and part metal bearings and a highly detailed polycarbonate body.
If you would like to see the previous steps of the build, please visit:
1. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Chassis Unboxing
2. • Video - Tamiya Rock Socker CR-01 Chassis Introduction
3. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Link Mounts
4. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Step 2 Attaching the Link Mounts
5. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Step 3 Mechanism Deck
6. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Step 4 Ladder Frame
7. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Step 5 Differential Gear
8. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Step 6 Drive Shaft
9. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Step 7 Axle Housing
10. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Step 8 Attaching Suspension Mount
11. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Step 9 Coil Spring Mount
12. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Steps 10 and 11 Attaching Front and Rear Uprights
13. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Step 12 Checking the RC Equipment
If you liked my video, please do consider subscribing to my channel, this really helps my channel. I always appreciate the support of fellow RC enthusiasts. Keep well and all the best to you. See you again soon.

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 38

@swissrcvideo 6 месяцев назад

Hi John, as always, you gave precise and understandable instructions in this step for installing the steering servo. Thank you for sharing. Best wishes from Switzerland, Thomas.👍👍

@JF-RC 6 месяцев назад

Hi Thomas, thank yo7 for watching and leaving a very nice comment. Best wishes to you and the family 😉😊😎

@AdventureTimeRC 6 месяцев назад

Good step John your getting close to the end

@JF-RC 6 месяцев назад

Hi Brent, thank you for watching and commenting, I appreciate you stopping by. Best wishes 😊😉😊

@RCBirds 6 месяцев назад

Great job John. I like that you're going the crawler path without the saver.

@JF-RC 6 месяцев назад

Hi Dirk, thank you for watching and leaving a nice comment. Yeah changed my mind and took off that servo saver. 😉😎😉best wishes to you and the family 😉

@RCBirds 6 месяцев назад

@@JF-RC thanks and same to you my friend

@NANNIRC 6 месяцев назад

Hi john! Another little step to the finish line! well done! Ciao

@JF-RC 6 месяцев назад

Hi Nanni, thank you for watching and leaving me a nice comment. Best wishes, ciao 😎🖐️😎

@YOOPDLRC 6 месяцев назад

You are working on important servo-related parts. It's really great. 👍👍👍

@JF-RC 6 месяцев назад

Hi, thank you for watching and leaving a nice message. So right, I always want to make sure I’m as accurate as possible, so that I don’t need to adjust the trim on the radio. Best wishes 😎😉😊

@HaydadRC 6 месяцев назад

Nice work John, an important step completed! ✔️ Your builds are always so organized and tidy!👍😊

@JF-RC 6 месяцев назад

Hi Jeremy, thank you for watching and leaving me such a nice comment. I’m afraid I have to work tidy, as my hobby table is only 700mm x 600mm (2.5ft x 2ft), maybe when I’m older, the Mrs will allow me more hobby space 😂🤣😂Best wishes to you and the family 😎🖐️😎

@madmustangrc214 6 месяцев назад

Watching you work sometimes reminds me of watching a surgeon I keep waiting for you to yell out scalpel. You are always so proper and organized good job my friend. Hope you and the family are well. Until next time

@JF-RC 6 месяцев назад

Hi Kev, thank you for such a great comment, you’re too kind. 😎😉😊I have to work tidily because my hobby table is only approx 2ft square ☺️🧐, now where’s that scalpel and forceps! 😂🤣😂 I hope that you and the family are all keeping well, best wishes to you all 👍🖐️👍

@SevenWelt 6 месяцев назад

Hello, I really liked your video!👍 Greetings Seven🖖

@JF-RC 6 месяцев назад

Hi Seven, thank you for watching and leaving me a nice comment. Best wishes 😎🖐️😎

@maxmixrc 6 месяцев назад

Great build video my friend 💯👍😊

@JF-RC 6 месяцев назад

Hi Max, thank you for watching and leaving a nice message. Best wishes 😎😉😊

@rcplaytime 6 месяцев назад

Great step by step dude 👍👍😃

@JF-RC 6 месяцев назад

Hi, thank you for watching and leaving me a nice comment. Best wishes 😎🖐️😎

@sparetimerc 6 месяцев назад

Hi John, some serious measurements are going on with the servo👍👍. Closer to finishing up the build, another master build tidy and organize like always. Take care and best wishes to you and the family.

@JF-RC 6 месяцев назад

Hi Al, thank you for watching and leaving me a wonderful comment. Perhaps a bit OCD with the measurements ? Still that’s me, I want to always be as accurate as possible. Thank you so much for the kind compliments. Best wishes to you and the family 😎😉😊

@rc-dom-uk 6 месяцев назад

looking good mate 😊👍best wishes 👍

@JF-RC 6 месяцев назад

Hey Dom, thank you for watching and leaving me a comment. Best wishes 😎😉😊

@RallyandTrail 6 месяцев назад

Nice work as always mate 👍😎🏁

@JF-RC 6 месяцев назад

Hi, thank you for watching and leaving me a nice comment. Best wishes 😎🖐️😎

@tiborvon 6 месяцев назад

Coming on Jon, nice info video buddy

@JF-RC 6 месяцев назад

Hi Tibster, thank you for watching and leaving me a nice comment. Best wishes 😎🖐️😎

@BangForYourBuckRc 6 месяцев назад

Brother John! Very well done and explained step. Would you consider working for Tamiya producing tutorial videos for all of their new models if such a position were offered to you? You’d be great at it, that is for absolute certain! 🤗✌🏼cheers 🍻✨

@JF-RC 6 месяцев назад

Hi Robby, thank you so much for such a great comment. Oh wow yeah! Working for Tamiya would be a dream come true. But alias, for now, I’ll have to keep doing what I do for great gentleman like you 😉😎😉best wishes to you and the family 😎😉

@Rcloverofficial 6 месяцев назад

Nice 🎉

@JF-RC 6 месяцев назад

Hey, thank you for watching and leaving me a comment. Best wishes 😎😉😊

@Fortes_RC_Adv 6 месяцев назад

Nice😊

@JF-RC 6 месяцев назад

Hi, thank you for watching, I appreciate you stopping by. Best wishes 😎😉😊

@FastFreddyRC 6 месяцев назад

Those are some pretty long steering rods! Question…did you change the servo saver? In your last video you put on the servo saver from the kit but that looks different.

@JF-RC 6 месяцев назад

Hey Freddy, thank you for watching and you’re very sharp eyed! 😂👍🖐️yes, I changed out the servo saver, removing it and going with a direct servo horn. I’m not going too fast with this model, so thought the saver wasn’t too much of an issue. And I needed an extra saver saver for the 4WS 👍🖐️👍best wishes 😊

@FastFreddyRC 6 месяцев назад

Very good! I’ll we watching for the next video!