Tamiya TT-02 Rally Conversion - Complete Review and Tutorial

Подписаться 2,6 тыс.

Просмотров 10 тыс.

50% 1

Welcome to this Tamiya TT-02 Chassis Rally Conversion Guide, where I'm going to show you how to Convert this chiassis into a proper Rc Rally Car, without spending a lot of money.
With this mods you are going to increase the handling and the performances of this Rc Car in any surface: Onroad, Offroad, gravel, grass and sand.
Adding some Hop-Up and modifying the steering system using a top deck you are going to increasing the steering angle, meanwhile adding a new pair of shock towers, cvds and modifying the suspension arms will allow you to increase the ground clearence.
Other "Rc Rally Car" reviews:
-Tamiya XV-01
• Tamiya XV-01 | Everyth...
-Tamiya XV-02
• Modified Tamiya XV-02 ...
-Xray T3 Rally Conversion
• This is an EFFECTIVE R...
-Xray XB4 Rally Conversion
• Xray XB4 Rc Rally Conv...
_What you Need:
Tamiya 54874 TT-02 Adjustable Upper Arm Set
Front/Rear CVD at least 38mm
Front/Rear differential Cup Joint
Wheels with offset
Shock Towers
Top deck made by carbon - 3D Printed - aluminium
Instagram
/ dariorcgarage
• How to Rc Rally? How t...
• How to make a Rc Rally...
------------------------------
Track: I Am OK - Vishmak
[Audio Library Release]
Music provided by Audio Library
PlusWatch: • I Am OK - Vishmak...
------------------------------

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 54

@buffalodiehard 8 месяцев назад

i love that you are covering all these different rally chassis thank you Dario

@dariorcgarage 8 месяцев назад

Welcome! More to come in the future

@Tmman1997 8 месяцев назад

Hey Dario I've just buy a tt02 to complete my RC builds with the xv01. What a perfect timing. Thanks for the video Dario!

@dariorcgarage 8 месяцев назад

Nice to know! Enjoy your TT-02

@christophblack9390 8 месяцев назад

Hi Dario. I'm glad your back to Tamiya.

@dariorcgarage 8 месяцев назад

I'll keep making video related to Tamiya cars, they are amazing!

@christophblack9390 8 месяцев назад

What do think about Tamiya's new XM01 chassis?@@dariorcgarage

@buschi3530 4 месяца назад

Hallo Darius, vielen vielen Dank für die ausführlichen Vorstellung mit den dazugehörigen Maßen. Mega gut. 😊❤ LG

@fotoprojekts 7 месяцев назад

I havn't tried my tt02 outdoors jet, but I have achieved 35-36 cm u-turn diameter. Hope that weather here in Latvia soon will be fine to test it outdoors.

@dariorcgarage 7 месяцев назад

Congratulations! Happy to know that this video helped you

@metoo1980 5 месяцев назад

Great built, great video! Thank you for the detail explantation. Can you please give an estimate for the length of the steering rods?

@dariorcgarage 5 месяцев назад

Thank you! I'll try let you know, but of course are a bit longer than the stock ones. If I remember correctly 3cm

@somedudewithakeyboard 6 месяцев назад

Great overview of TT-02 rally conversion. Thanks.

@marksmithdiecast001 8 месяцев назад

36 likes! That is a very cool RC ride! I enjoyed the video! New sub here!

@dariorcgarage 8 месяцев назад

Welcome! Enjoy my RU-vid Channel 🙂

@maxm1417 8 месяцев назад

Thank you dario! The video i was waiting for!! 🎉

@dariorcgarage 8 месяцев назад

Welcome! Happy to know that

@theoagrc 8 месяцев назад

Great video Dario 👍🏻

@dariorcgarage 8 месяцев назад

Thanks!

@elvo_racing 6 месяцев назад

Do you have the stl or dxf files for the upper deck?

@shindisingh1165 8 месяцев назад

8:15 - this rear carbon shock tower looks like an XV-01 long damper stay 👌 10:04 - i think they're the same on the outside, i dont see the difference, it looks like youre holding 1 of them the wrong way round 🧐🤔

@dariorcgarage 8 месяцев назад

Hi! Yes that's a shock tower from XV-01 Long Damper, but the idea of the video is to "give the freedom" to adapt what you have around in order to obtain this result. Thanks for pointing it out, my mistake while filming. The outer part has been trimmed a bit too by my friend, thought was important to share this detail too

@shindisingh1165 8 месяцев назад

@@dariorcgaragethanks Dario, I'm going to look into the XV long damper stays!

@Outlawracing713 3 месяца назад

Love your videos! Quick question, what radio do you use? I’m new to the hobby and want to use all the same stuff as you

@dariorcgarage 3 месяца назад

Happy to know that you enjoy my videos! I used a Sanwa MX6, now I'm using a Sanwa MT-5

@Elmasviejo03 8 месяцев назад

Thank you for explaining it. It is very good. In another video they show the turning radius that the xv-01 wheels. And a this model, how much turning radius it has? To compare between models. Very thank's

@dariorcgarage 8 месяцев назад

That's the video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Ss4UML2_VDI.htmlsi=8bfzoRsHQ2pM-fRX 46cm for Tamiya XV-01

@冰是睡着的水-j8y 7 месяцев назад

hello. 4WD front damper hard, soft on the rear. Try a few times and you'll find the run you want. After 2WD drive, the rear shock absorber is hard, and the front shock absorber is soft. The front drive is hard on the front shock absorber. I hope it was helpful

@dariorcgarage 7 месяцев назад

Thank you for the advices

@Reindeer911 Месяц назад

OK, I'm not following why you need to create both the differential steering angles for a rally car, and why the extreme turning radius for the spindles. I understand the reasons why you would want to do that for a drift car as they need that in order to counter-steer while drifting. But why do that on a rally car unless drifting in the dirt is what you have in mind?

@dariorcgarage Месяц назад

Because in Rc Rally we race on tight courses with narrow corners, so for a good Rally setup you need a big steering angle. For bashing around it's just necessary to increase the ground clearance. Take a look at this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3gln8IqqyVA.htmlsi=6Ct-CWD1NSdm2e2y

@shouwnoosting6030 6 месяцев назад

Thanks Dario for the informative video. Do you think you need the top chassis brace if you use the Tamiya Hop-up hard chassis?

@dariorcgarage 6 месяцев назад

Hi, can you be more precise please? To which item are you referring:)

@shouwnoosting6030 5 месяцев назад

@@dariorcgarage I'm referring to the lower chassis. I have upgraded mine to the Hop Up Options hard chassis. Do you think an upper brace is still needed if you use the hard chassis option?

@AI_Shorts_Creations 4 месяца назад

where can i get the top deck print files

@farhanalsyafiq7508 5 месяцев назад

Do you have a link for the upper deck printing

@m0liee 5 месяцев назад

Picked up a 2nd TT01 SRX and want to make it a fun rally car. What shock towers did he use in this build and what sre the length of the shocks? Thank you.

@dariorcgarage 5 месяцев назад

The rear one it's from Tamiya XV-01 (hopup) the damper's should be 5-6cm if I remember correctly

@jorgmatuschek5362 Месяц назад

Where can I get this upper deck with all the steering parts? I am realy intertested in. Than you for a link or a contacr

@dariorcgarage Месяц назад

Currently the upper deck and the other parts related to the steering system are self made, if there will be something available I'll let you know

@jorgmatuschek5362 Месяц назад

@@dariorcgarage thank you, that would be great

@enricomiceli5517 8 месяцев назад

0er quanto apprezzi l'inventiva la macchina non performerà mai come la xv01, bella idea ma io a sto punto lascerei la tt02 al touring e comprerei una xv01.

@fupak 7 месяцев назад

The regular TT02 has a big problem. Even the width is 190mm same as type s, but actually the arms of TT02 is shorter only the wheel offset to reach 190mm. Check the TRF arms that come with type S, are much longer than the regular TT02 arm. The consequence is unstable as the actual wheel base is narrow

@dariorcgarage 7 месяцев назад

Good point! Some offset could also help

@fupak 6 месяцев назад

@dariorcgarage meaningless to tune camber, it just makes the steering only worse

@gsxrdave1974 2 месяца назад

xv02 pro chassis is a muchbetter designed chassis for a rally car otb

@dariorcgarage 2 месяца назад

Agree but if you want to go on budget tt02 it's the answer

@fotoprojekts 7 месяцев назад

Hi Dario! Whats is the diff setup on this tt02 chassis?

@dariorcgarage 7 месяцев назад

Hello! No diff oil, just grease

@ginolim02 7 месяцев назад

What is the front damper stay? the rear looks like from an xv01?

@dariorcgarage 7 месяцев назад

The rear is from XV-01, the front one I don't know since this chassis it's not mine. But you can try to adapt whatever you have

@SergeyZZZ1977 7 месяцев назад

I have a very bad experience using the TT-02 Rally. Low quality and reliability. There are a lot of breakdowns, a lot of wear and tear, and it requires a lot of spare parts and tuning. Fragile plastic in the cold. Now I only use HSP FF.