In this video I show you how to remove the front face of the plastic case of the Tascam 244. This is something you will need to do in order to change VU meter bulbs, clean or repair the shuttle switches and plastic shuttle buttons, repair the power switch. It is also a helpful step if you have a very dirty or neglected unit which needs a deep clean.
EDIT jUNE 2020 - You'll see in the comments below several folks saying they can't get their face plate off without removing two heavy brass screws with long shanks located in between the record and playback circuit boards ( the two board orientated vertically in the centre of the unit). I thought the long shank brass screws screw into the metal chassis and not the plastic case beyond it , therefore they are mentioned in my video about removing the record/playback PCBs and not in this one... I don't know if i was just plain wrong about this all along, or whether there are slight variants on the contruction of these, but either way please be aware that it may be necessary to remove these two screws in addition to those pictured in the video. Thanks to everyone who commented about this.
___________________________________________________________________________________
TETRAKAN - Fix & Use Tape Recorders
Overviews; tear-downs; repair vlogs; techniques; tutorials; demo recordings...
...covering every cassette multitrack recorder ever made!*
*(eventually)
/ tetrakan
Paypal donations are gratefully accepted via my blog, which also features written articles and free downloads of service manuals;-
tetrakansupermonobloc.home.blog/
If you would like to make a regular donation check out my Patreon account;-
/ tetrakan
I prefer to answer questions in the youtube comments where my answers can help more than one person, but if you need to share photos etc, you can message me via facebook.
/ tetrakan
Tools and equipment I use when repairing portastudios;-
kit.co/Tetrakan
6 авг 2024