Tekno RC ET410.2 - 1/10 Truggy! First Race = First Win! 

Can't believe the fun I was missing! The class was starting to die but hopefully I can get more friends into it. Thanks for watching, I appreciate the support :)

Thank you! I appreciate your support!

Thanks for the support brother! It's exciting to see the views and subs go up! I plan to keep posting videos and always looking for something interesting to talk about. Hmmm, comparison video? Lol!

​@in4bliss hey bud what what count on pinion tooth you using?

Thank you! I appreciate it very much!

Thanks! I'm using the stock spur gear and 18T pinion.

Thank you

Front TKR7044: www.amainhobbies.com/tekno-rc-50mm-front-shock-spring-set-orange-2-5.75lbin-tkr7044/p1245056?gad_source=1&gclid=Cj0KCQjwn7mwBhCiARIsAGoxjaLBVLeXT1b9uM8AxCseRpWN0J_Vx9ljUX-OsK4YsILWYx3MsS1o_RAaAh8aEALw_wcB Rear TKR7246: www.amainhobbies.com/tekno-rc-63mm-rear-shock-spring-set-1.3x9.375-orange-3.01lb-in-tkr7246/p788353

Thank you, I really appreciate it! If your shocks are too soft and the chassis slaps the face of the jump on entry (especially the rear), this usually bucks the rear end and you're going to nose dive most of the time. I'm running some pretty heavy shock oil and that helps 500fr 450rr. One other thing is letting off the throttle too soon. I'm on enough throttle to clear the jump and I don't let off until my rear tires leave the face of the jump. At this point I'm always ready to smash the throttle again in case it starts to nose down too soon. There's a small chance it's the jump itself but usually it's throttle control. If you're nose diving all the time, stay on throttle all the way through the jump and only let off just before you land. Hope that helps!

I wanted to add, as an example of how much throttle usage there is in a jump, at the beginning of the video, there's a small clip of me clearing the triple. I was on full throttle at entry, then immediately was on half throttle through the air. Held mid throttle and then at the last second, I tapped the brake to downside it. The audio is there and you can hear the rev of my motor and can even hear when I let off.

@@in4bliss cheers! yeah you can totally see where your hammering it, easing off then you can hear the brake. Its my first build but am loving it. Guess i just need more laps to get it dialed in. Thanks again buddy and good luck !

Here's all the info from one of my other videos: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-X3aNHcTYy34.htmlsi=bjWWhC5CFtgNu16d

Also, the ball ends I used are the stock ones from the kit.