Teltonika FMB Immobilizer Scenario 

Hello, Thank you for your comment! As every vehicle might have a specific connection with the relay, we would advise you to contact the nearest Teltonika office to help you resolve this enquiry. Find all Teltonika offices here: teltonika-gps.com/about-us/contacts

but the relay is the only way to start the starter since the starter control cable is cut off.

@@DedeVezis So the relay has to be hidden somewhere ?

@Kopsir well it certainly should be out of eyesight

Sure, you can control the DOUT with SMS/GPRS command. Please check the user manual for "setdigout" command.

Hello, you can control immobilizer relay by simply activating DOUT via SMS/GPRS command "setdigout". For the syntex, please refer to our wiki: wiki.teltonika-gps.com/view/FMB_setdigout

Hello! Thank you for your question. While the FMC920 has functionalities for various scenarios, it does not directly turn off the vehicle remotely via a platform using the Immobilizer. For your requirement, you might want to consider using the SECO (secure vehicle disabling) functionality. This allows you to remotely disable the vehicle under certain conditions. You can read more about this functionality on our wiki page: wiki.teltonika-gps.com/view/Secure_vehicle_disabling

Hello! Thank you for your question! Yes, it is possible. The relay must work according to the voltage of the vehicle (12 or 24 voltage).

Hello Nancy, relay connection logic is the same for all of our trackers with digital output. In case you need more info, please contact the salesperson.

Dear Ousmane Noah Traoré, This can be achieved using relay and Digital Output to stop fuel pump in the vehicle. For a detailed answer please contact Teltonika sales representative via Contact us button in our page - teltonika-gps.com/ or find the information in our community forum - community.teltonika.lt/