TEQOFFROAD Under Hood LED Mod + Install - Toyota 4Runner / Universal Fit

Подписаться 25 тыс.

Просмотров 8 тыс.

50% 1

► Buy me a coffee if I helped you with this video! www.buymeacoff...
► Support this channel by buying some 4Runner Merch! teespring.com/...
TEQ Offroad / Yota Nation sent me out this under hood led kit for my vehicle and I decided to make an install video for it. I'm super happy with it and stoked about this because it has many useful purposes.
Great lighting for working in the engine bay
Great lighting when offroading/camping
Eliminates the need for a shop light
Parts:
yotanation.com...
Install PDF:
teqoffroad.com...
Tools:
10mm Wrench
12mm Wrenches
Drill
5/16" drill bit
Center Punch
Painters Tape
Rubbing Alcohol
Disclaimer:
Due to factors beyond my control, I cannot guarantee against improper use or unauthorized modifications of this information. I assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond my control, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not me. Enjoy my videos.
As an Amazon Associate, I earn a small commission from qualifying purchases. This cost you nothing and helps support my channel! Thanks!

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 77

@TimmyTheToolman Год назад

Sic Mod Minh! I need something like this. It's interesting you have a link for people to buy you a coffee. We have a link for people to buy us a beer. Anyway, this mod is simple and satisfying just like the Spiker Engineering hood struts are.

@PhoRunner Год назад

Haha I don’t really like or drink beer ;) I might lose subscribers for saying that

@TimmyTheToolman Год назад

@PhoRunner Channel Here's a suggestion Minh. Make your "Buy me a coffee" the first line of every video description. When you do that, everyone will see it. Not everyone opens the video description. I've learned that by getting tons of questions that could have been answered if they bothered to expand the video description by clicking on "Show More ". We've gotten a good response so far. Our top beer donation has been $100. We've actually received several $100 donations. Most donations are small, but it's cool people are showing their appreciation for the content we offer.

@PhoRunner Год назад

Nice. $100 is wild haha think I most I’ve gotten was $20-30 :). I always feel bad asking so I stopped mentioning it in my videos and if people find it, cool. Maybe I’ll move it up lol

@TimmyTheToolman Год назад

@PhoRunner Channel Yeah, move it up. At first, I didn't like asking for money, but when I thought about how much money our videos save people, I didn't feel weird about it anymore.

@PhoRunner Год назад

Yeah lots of long hours filming and editing and researching and sometimes even damaging our vehicles. Sometimes I miss working on my truck in peace with no filming lol but the fans like it so I do it

@AntonioClaudioMichael Год назад

I can't wait to get mine I ordered 3 of them 2 for my 3rd gens and 1 for a 4th gen

@PhoRunner Год назад

You’ll love it!!

@AntonioClaudioMichael Год назад

@@PhoRunner going to be a life saver on tons of situation to easy of a mod not to do its like ditch lights for your engine

@AntonioClaudioMichael Год назад

Good install video bro very simple easy setup

@PhoRunner Год назад

Thx and yes very easy!

@AntonioClaudioMichael Год назад

@@PhoRunner always nice when mods are simple

@moed9874 Год назад

As with all your videos, an excellent how to.. Thank you and I need to get this mod!

@PhoRunner Год назад

It’s a great addition. Wish I had it before because I spent money on a hf light lol

@ultrazep Год назад

I’m getting one of these for sure. This is such a great mod! They are going to sell so many of these.

@PhoRunner Год назад

Wish I had it when I did my valve cover lol

@deluxe1030 Год назад

i got to look into those lights, cool

@PhoRunner Год назад

Works great for engine work!!!! I hope it lasts and doesn’t flicker!!! I’ve only had it for a day so time will tell. It looks sealed well though and quality!

@angeloubarcelo8969 Год назад

Ordered mine a month ago, have yet to install in my 1st gen Tacoma, will do so shortly, thanks for the video 🤙🏽

@PhoRunner Год назад

No problem!

@TrailRunn4r Год назад

Thanks for the install video, great timing since I got one of those in the mail!

@PhoRunner Год назад

Nice

@leonmoorenatureexperience Год назад

Amazing.. buying a pair as I just bought a 99 Toyota Prado Land Cruiser. So one for my 4runner and the other for the land cruiser 😊, I’ve always wanted something like this for my rig.. Excellent as always.

@PhoRunner Год назад

Wow nice!!

@sweendawg7274 Год назад

You need to add a hood strut kit!! Best decision i ever made!

@leonmoorenatureexperience Год назад

Man, I’ve been waiting to see this

@PhoRunner Год назад

It’s pretty awesome!!

@jameswatt4694 Год назад

I installed a very similar kit from Scarab a couple years ago. Just wanted to say that after a while I relocated the ground and bypassed the hood pin for stealth reasons. It also rattled loose a few times so I prefer to control it with the switch. You should really install Spiker high-lift hood struts! First mod I did to my 3rd gen and remains one of the most useful on a daily basis. Cheers.

@PhoRunner Год назад

It’s on my todo list. Nice tip. I was think the grounding may need some sanding for better connection. I’ll monitor it.

@sosa739 Год назад

Woah that so cool I was thinking of doing this mod before this video came up! Time to do this to my 4runnah lol cool mod 👍

@PhoRunner Год назад

Cool! Yes it’s a nice add for sure

@pricelesst4r Год назад

Nice! I have one, really good kit.

@PhoRunner Год назад

I’m enjoying all the lighting!

@FrankHagenMusic Год назад

Man, I'm so happy I found your channel. You have almost all the mods that I've been wanting to do to my 4runner! Thank you so much! What's your take on regearing the rear dif for the bigger tires and lift for better MPG?

@eljefeslash Год назад

Heck yeah! This is awesome. I will be getting this for sure. How is the drain on the battery? Just thinking if I have it open for a long time to work under there, will it drain the battery after a while? Thanks!

@PhoRunner Год назад

It’ll be a while… the wire is very small and no relay suggests it draws very little power. The fuse is 5amps also so I suspect 2-3amp draw max.

@YotaNation Год назад

Great install video!

@PhoRunner Год назад

Thanks for an awesome product

@dprofeta1 Год назад

Bro, great video as always, but I feel like you are stalking me. First the Atoto, now this kit. I guess great minds mod alike.

@PhoRunner Год назад

Lol maybe…

@schlomoshekelstein908 Год назад

Bro why did you drill that hole at 6:00 when there's already a hole in the fender an inch away? Was there a reason? Cuz I bought this kit hoping to use that pre-existing hole and not have to drill anything. i'm pretty sure that pre existing hole would have worked, and there's another one closer up to the hood hinges that would keep it out of the way of getting caught on anything. i don't know why you drilled that LOL

@YotaNation Год назад

Hello! The hood is curved above that hole and would cause the pin to break after extended use. It also makes the pin switch visible from certain angles when the hood is closed through the gap between the hood and fender.

@PhoRunner Год назад

Yota nation did their homework designing this and I can confirm similar. I chose that flat spot to allow easy operation of that pin.

@mekkatrippz7954 Год назад

have you thought about hood struts for extra space instead of moving around the hood pole

@PhoRunner Год назад

I have but I worry it being another item lol

@mekkatrippz7954 Год назад

@@PhoRunner dont blame you 😂

@PhoRunner Год назад

I am researching an alternative cheaper option

@19thholegolf23 Год назад

Hey hope all is well, I just got the same bumper as you and winch and noticed the front end was dipping down a bit do you have a good solution for that? Thanks so much

@PhoRunner Год назад

Up the perch to the 2nd lowest if you got bilstein

@19thholegolf23 Год назад

@@PhoRunner I was thinking about that or adding spacers, would you not recommend spacers? Seems like it’s dipping down half an inch, gonna get everything measured on Monday.

@PhoRunner Год назад

I got a tiny 3/8” spacer on top of mine to fix lean. Mines on 2nd perch with 883 now since it settled quite a bit

@eurika7655 Год назад

Wife need underbody lights for her safety. Not mirror lighting. Is there a kit that works with her factory key fob ? When she uses the unlock button the lights come on ?

@PhoRunner Год назад

Hmm probably need a special device to wire such a thing. I’m not sure of any. But you’ll need to find a circuit that stays on when key is unlocked, don’t think the 4runner has anything

@eurika7655 Год назад

@@PhoRunner toyota has the kit. $1000

@19thholegolf23 Год назад

Two questions, I have a 97 4Runner and was thinking about going to km3s that were 32s does that fit on stock 4Runner and does that mean I have to regear as well? Second question can you just put a front locker on the stock 4Runner or have to change a bunch? Appreciate the answers and have a good one.

@PhoRunner Год назад

Should fit. Bfg run small. Lockers won’t require a bunch of change.

@19thholegolf23 Год назад

@@PhoRunner fire thanks so much, just Built sleeping drawers in back your video on it inspired me

@W--th5ub 8 месяцев назад

hey man, just wondering where did you get your hood insulation?, part number? thanks.

@PhoRunner 8 месяцев назад

It came with the vehicle. I’m not too sure

@JoBiatch 5 месяцев назад

Is there any concern that the LED strip might come off and get tangled in the drive belt while the vehicle is running?? That worries me.

@PhoRunner 5 месяцев назад

That’d be a bad day!!! I haven’t had issues yet and so far so good even in hot weather!

@michaelcarter1047 Год назад

Hello! Just got a 3rd gen, my lift kit is coming in tmmw. What other components do I need to upgrade. For example do I need to get my swat bar end links now. If so which ones?

@PhoRunner Год назад

Yeah. I would move the fronts to the rear and buy 2nd gen 4runner ones for the front. Think I got a link and details in my video description