Testing Raspberry Pi Camera Module v3

Подписаться 46 тыс.

Просмотров 28 тыс.

50% 1

💳
My first steps with Raspberry Pi Camera Module V3 - how does it fare against other modules, Octoprint and getting started
🔗 Extra info: notenoughtech.com/raspberry-p...
🛒 ThePiHut : thepihut.com/products/raspber...
=============================
Table of Contents:
=============================
00:00 - Intro
00:30 - what's new in Camera Module v3?
01:30 - Camera Module v3 vs other modules
02:49 - getting everything ready
04:19 - first impressions of Camera Module v3
05:00 - picture showcase Camera Module v1.3, v2.1, HQ, v3, Arducam and mobile phone
07:45 - more about autofocus
08:20 - Camera Module v3 vs Arducam 16MP AF
10:00 - video performance of Camera Module v3
11:25 - Camera Module v3 and octoprint
13:00 - conclusions
Corrections:
01:10 - Sony IMX708, not Sony IMX477 which is present on the HQ camera modules
=============================
Social Media & Business Contact:
=============================
2nd YT channel: / @techovertime
Twitter: / notenoughtech
Facebook: / notenoughtech
Instagram: / notenoughtech
Reddit: / not_enough_tech
Business Contact: notenoughtech.com/contact-bus...
=============================
Patreon & PayPal:
=============================
If you wish to support the channel monetarily, check the options here:
notenoughtech.com/about-me/
Created thanks to the support of the Patrons:
oolara, Alan C A, Arya, Dane M, Daniel, G, David G, David M, DoomedSardines, Herik A, Jack C, Leroxy, Natasha W, Nis L, Noodle, Sandra I, Tony L, Art, Enric, Faith E
With extra support in November from:
Mladen Ivanov,
=============================
Gear Used to Make This Video:
=============================
Camera: amzn.to/3ItOkQ2
Secondary Camera: amzn.to/3spHqWr
Microphone: amzn.to/35A9fm8
Secondary Mic: amzn.to/3HuYoae
B-Roll kit:
Slider, Pan & Tilt: s.click.aliexpress.com/e/_ANtWM5
DSLR Gimbal: s.click.aliexpress.com/e/_AkOYap
Action, Vlog Kit:
Phone: www.banggood.com/custlink/3mm...
360 Camera: www.banggood.com/custlink/vD3...
Action Camera: www.banggood.com/custlink/DDK...
Mobile Gimbal: amzn.to/3vk2Yph
Drone: www.banggood.com/custlink/G33...
Sound Recorder: amzn.to/3M2wgip
Streaming Kit:
Webcam: amzn.to/3MhEKkJ
Microphone: amzn.to/3vnGofu
HDMI capture card: amzn.to/3IqCVkc
=============================
Music:
=============================
Hip Jazz by Benjamin Tissot - www.bensound.com
==========================================================
Product affiliation, sponsorships and affiliate links
==========================================================
More information: notenoughtech.com/review-disc...
Transparency Legend:
💳 - I paid for the item with my own money
🆓 - I was interested in the item, received free of charge
📈 - I used links that bring me affiliate payments
💵 - content commissioned, I retain 100% creative and critical control
💰 - ad/ sponsored content possibly vetted by the sponsor
=============================
#raspberrypi #Camera

Наука

Опубликовано:

28 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 49

@woolfy02 Год назад

Very cool! I just ordered both the standard and wide versions. Now I just have to figure out a project to use them for. haha

@chuxxsss Год назад

Good work, mate .

@eprohoda Год назад

Omg. amazing view. )

@OriruBastard 11 месяцев назад

v3 camera looks really good.

@ronm6585 Год назад

Thanks Mat.

@789rdx Год назад

I am interesting to operate the new camera by means of the mmal lib. What is your expiriences with it. Thanks

@notenoughtech Год назад

Next to zero I'm afraid :~)

@legalpredator5217 Год назад

thanks for the good video/information 🤖

@zied.lahiani Год назад

Thanks for the Video ! about the sensor model, i think you wanted to say IMX708 , instead of 477 :)

@notenoughtech Год назад

Yes, you are right

@-Ricochet- Год назад

Great and straight to the point comparison. Have you succeeded configuring V3 for Octoprint / Octolapse yet? I've had nothing but issues with v2 when going past 720p. 1080p works for a little while and then stalls. And the picture is either of poor quality or zoomed in, depending on the usb / raspi parameter. It produces a ton of data and a cinsiderable load on the network as well. I was really hoping that perhaps V3 could finally be usable at FHD res.

@notenoughtech Год назад

I know that support for v3 for octoptint is in the works with release imminent. So hopefully we we'll see some improvements there. I haven't come across any issues with my octolapse if I'm honest. The only problems initially was to figure out what configuration schema rpi uses vs usb in the config file. Both were responding to different entries (covered in octolapse video on pi camera). Be sure to avoid auto setting

@janj5163 Год назад

Great news. Let's hope they solve the stability issues some of us are having. And add more options. For some reason 1080p just doesn't work here. Even sending remote move commands to the printer takes 5 seconds in that mode.

@john_hind 11 месяцев назад

@@notenoughtech Sadly 'imminent' can be a long time in Octoprint land! There is a special version in Raspberry Pi Imager now, but I found it unreliable and I kept having to reboot to restart the camera feed. Also a special OS image does not really suit my way of working since I want to put other stuff on the Pi as well. I do not really need Octolapse (though it would be nice), just the camera feed on the web UI. This ought to be straight forward since it is just putting a web stream in a frame on a web page. Any further insights on this would be very welcome!

@kyallon1213 11 месяцев назад

Great video! I’m new to using Raspberry Pi but need a small camera for taking video recordings on a project I’m working on. Is there a noticeable difference in frame rate when using the camera on a raspberry pi 3 vs a pi 4? The pi 3 has been easier to find so if I’d rather use that if possible.

@notenoughtech 11 месяцев назад

No both should perform at the same specifications

@Gerald-iz7mv Год назад

hi nice video. can you connect the raspberry pi camera module 3 to Raspberry Pi Pico? if so what additional hardware i need?

@notenoughtech Год назад

RPI Pico isn't powerful enough to handle video output. You will need at least RPI Zero

@john_hind 11 месяцев назад

Anyone know of a GUI app to do this stuff without all this command line faffing? Even better a web app? I was quite surprised there was nothing in the base Raspberry Pi OS installation.

@Sahilkhan-jd5fz 5 месяцев назад

Module 3 wide lens is a strong contender

@BrittmyDog 11 месяцев назад

hi great cam .. but is the motioneyeos already working with this one .. or is there an other script that's works

@notenoughtech 10 месяцев назад

I'm not sure if I'm honest but RPI has great pdf with everything you need to know about the camera.

@devnull256 11 месяцев назад

Hi, I used to film fullhd 30fps capture with v2 camera for 2-4 min video clips requiring constant framerate. I could only achieve it with RPi4 with at least 4GB RAM with sufficient RAM dedicated to video memory (256 or 512MB), otherwise frame drop would start to develop after approx 1min of filming. I was wandering how you are filming with pi nano?

@notenoughtech 11 месяцев назад

It's pi zero 2. It's the same cpu as on rpi3 so it has more than enough to sustain it. Perhaps look into bitrate of your video? It's all about good compression and codec

@devnull256 11 месяцев назад

@@notenoughtech *zero of course, sorry for typo. CPU has little to do while capturing, it is videobuffer memory size I think. Was wandering if there are any tests of continuous fullhd video capture with zero 2, can it keep the framerate beyond 1-2 min of footage? I needed fairy high bitrate, captured with standard pi CLI tool to h264 file.

@MONTY-YTNOM Год назад

New to this. Bought one of the V3 to try it for astro photography and time lapse. But I've since been told it might not be any good for Astro. Oh well :) Main question is, is there an 'app' or program with a GUI that I can use to control the camera. ?

@notenoughtech Год назад

You could use it for that although HQ would be better suited as you can get adapters to connect to your telescope. You will need something to seat the camera properly and you will make it to work. Especially if you can 3d print an enclosure. As for gui I haven't checked yet but if you look for pi camera on Google I'm sure someone have done a basic interface already.

@MONTY-YTNOM Год назад

@@notenoughtech its not through a telescope .

@coffeegeek54 Год назад

Hello - what brand is your tripod and red camera mount and where did you purchase it? Great video !

@notenoughtech Год назад

The mount was a part of the Arducam. The tripod was something I dug out. The mini legs were part of the hohem gimbal. So you can't really buy it unless you get the whole thing. You can look online at mini tripods. Anything with a quarter inch adapter will work

@coffeegeek54 Год назад

@@notenoughtech thanks very much !

@iFiSiKz 8 месяцев назад

Hi! Can i know what was the main unit you used? Was it Raspberry Pi Z 2 W?

@notenoughtech 8 месяцев назад

Yes that's the one I used

@MARCOSULISESROSTRORAMOS 7 месяцев назад

amazing comparison, nice video. Do you know how to setup de v1.3 module for rasp 3b+? i have a problem when i try to open my camera module

@DustinGorman Год назад

I wanted to get the cam 3 for octoprint... :(

@notenoughtech Год назад

its in beta now so shouldnt be long before its supported

@PaulCaseyFan21 Год назад

Do you feel this camera works better than some MIPI camera alternatives?

@PaulCaseyFan21 Год назад

Like the IMX230 or IMX586 for example. The only downside being the zero does not offer MIPI connectivity so would have to opt for the rasberry pi 4. But interested in hearing your opinion. My use is for recording high speeding objects so would require a decent fps

@addictedconsumer Год назад

does the camera 3 support pi2 ?

@notenoughtech Год назад

Hello. I'm actually not sure. I'd like to say yes... but i think it's going to be down to the OS support - as hardware wise you should be fine

@ngkean9743 Год назад

Why is my camera video lagging ..

@GeekDetour Год назад

Thank you SO MUCH for your comparisons! I am still looking for a nice module to replace my Logitech C922 webcam on my motorised time lapses: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pMK1nL0LGG0.html I want to create a stand-alone solution, easy to set the initial and end position, make previews before actually printing, etc.

@notenoughtech Год назад

I have this compared in my time lapse video for printing

@kunanondiollengeater6367 Год назад

Is it work with klipper? I bought it to use with klipper but when open webcame its show “No Signal” Do you know how to fix it. Thank you🥲

@notenoughtech Год назад

I haven't used kilpper yet, I have a suspiction it manages the stream in a similar way to octoprint where a completely separate library handles the video stream and kipper just embeds the URL.