The 1/32 scale 1965 Mustang Fastback is starting to look good!! 

This is the time of the year to have your sinuses drive you crazy. Just get some rest. I’ve found it is best just to sleep when you are sick, because you are not miserable when you are asleep. Nice work getting the wheels and tires “sized down” for the 1/32 scale build. With the chrome paint, I have found that masking works really well. I have Tamiya tape and Meng tape. Both of them are very nice to use. The isopropyl alcohol is great to use to clean up mistakes with the chrome paint. I was using 90%, but a friend advised me to switch to 99%. So I bought some from Amazon, and I had to buy a gallon. So now I have a lifetime supply. Thanks for sharing.

Get well, Thank you for this video on painting the wheels and tires. they look awesome.

Coming together nicely, feel better soon!

Thanks for the tutorial. You do a lot to help the modeling community

Looking good thank u for sharing keep on building

Awesome video !! No apologies for your camera, your build video's are made at all kinds of angles, so it will need to focus. BUT! That's why you are the top model builder on YT ! In my opinion any way. Working, even building models being sick sucks! Thanks Matthew!

Great video Matthew! Sorry to hear you're not feeling well. Tis' the season for allergies and sinus infections. Your little Mustang is looking great so far. I gave up on foil wrap a long time ago. I accepted that I lack the skill to use it. For me, it's much easier to paint the trim with a lot of masking and patience. My dad taught me the toothpick painting technique when I was a kid. He did a lot of HO scale builds. I really like the tires and rims you printed and your take on painting them is top notch. I'm sure a lot of less experienced builders don't know the techniques to using Mr Surfacer, (my personal favorite) as both a primer and tire "paint". The Mr Surfacer 1500 gives a very smooth finish as a primer so 99% of the time I never need to light sand between priming and the actual finished painting. Also, big thanks for showing the proper way to use the Green Stuff World chrome. I wish someone had shown me that a few years ago when I first started using it. By the way, my Hobby Nut order is arriving today, 2 days ahead of the estimated ETA. Feel better my friend. 👍👍

Especially for belt moldings, I've had really great results with kitchen foil. A good foil adhesive such as that used for gold leafing or Bare Metal Foil Adhesive from Microscale works well. Before trimming it can be polished with mag polish, etc.

Good looking stang! I always love your paint jobs!

Nice. Looking pretty good 😊

Looks good. Hope you feel better.

Mustang is coming out great Matt. I too use alcohol to remove Molotow and Sharpie mistakes. The 3D printed cragar mags and tires look outstanding. Thanks for sharing and feel better. In had the same sinus issue last month. Enjoy your weekend.

VEry nice video on how you paint wheels and tires. Rally nice Mustang.

Persistence pays off! And if you think MCW Paints are really nice, which they are, you should see what Gia Notes from Japan can do. Sadly, they are rather difficult to get here in the US, but they bring your modeling projects up to a professional level. If only there was a way to more easily obtain them. Happy modeling anyway!

Love build videos. Great job like always.

Yes get well, The video on the tires and wheels look great! Answered a question on Chrome Airbrushing as well. The paint on the car must be pretty hard and resilient to handling. thanks great vid!

Looking great

You may want to try rounding off the end of the pointy toothpick. That way the bubble of paint stays at the end of the pick.

Hope you feel better soon! Spring colds and allergies just suck! Try putting some baby powder in your gloves to absorb moisture. I feel your struggles with BMF!

Nice video an thanks for sharing

This kit is coming together nicely - smaller scale kits present some interesting challenges, don't they? Within the last couple of years I've been using a silver Sharpie to do my chrome trim and that has worked well for me. I haven't found a replacement for it yet, so for my last project, which is the smallest car I have ever built (43rd scale E-Type Jag) I had to go "old school" and use silver paint and a fine brush. It wasn't the best but I can live with the end result.

Hi Mathew.. Love your 3d parts. great service too. If you get around to printing Mopar wheels could you do them in 15"s. i would buy several.. that little mustang looks great. I like that scale.

Nice ❤❤

Try Micro Metal Foil Adhesive by Microscale. Works great.

Never liked Molatov.The pen I got looked good on the first things I tried them on but a few months later I used it and it looked like old Testors chrome silver paint . Glad it works for you. I'd be interested in those 1/32 wheels and tires if you are going to sell them.

Matthew I use a mechanical pencil for using molotwl chrome pen when hand painting the lead in the pencil is small enough for fine detailing.

You might have old or the bad batch of BMF. The new stuff which have the adhesive issues solved, comes in a zip lock bag. And white package is booklet. That stuff will stick well. I have all ready foiled 2 cars with their fixed stuff. And be sure to use the "New Improved!! Chrome". That is the most chromiest foil.

If you polished the body, you should wash it off with mild dish soap, then try the bmf.

Have you ever tried that silver tape that looks like crome that is used on ductwork in homes? It would be much cheaper.

I did not see anyone else mention this but I did not read every comment. When working with resin, be sure to wear a mask. That stuff gets nasty and you do not want it in your lungs. I have done enough damage to myself over the years.

Do you print any 70s style dualies, for pickup trucks? I’d definitely be interested in getting a set or two

Hey awesome job !!! Just quick question I’m working on a 70 roadrunner and bought a set of iceman slot wheels and tires. Do you know what the best way of mounting them on a revel kit would be ?

I have never understand the 1/32 scale!

Have you ever tried the Zoet chrome pens? I think they’re even better than the Molotow ones