I did some pushups on one of my other videos, and someone challenged me to do 100. Challenge accepted. I kind of lost count but was able to get the total to 105, (I think). 😂. Let me know on the comments what you think. ✌️
00:00-00:11 Challenge
00:12 10 pushups
00:37 20 pushups
00:53 30 pushups
01:10 40 pushups
01:52 50 pushups
03:03 60 pushups
03:29 70 pushups
04:10 95 pushups
04:43 105 pushups
If you would like to start your own sealcoating business click here:
asphaltkingdom.teachable.com/...
The product we are using is: Asphalt Emulsion
What is an asphalt emulsion?
Asphalt emulsion is a combination of three basic ingredients; asphalt, water, and small amount of an emulsifying agent.
Why use asphalt emulsions?
Asphalt emulsion does not require a petroleum solvent to make it liquid and in most cases asphalt emulsions can be used without additional heat. Both of these factors contribute to energy savings. Additionally, asphalt emulsions offer great flexibility in their application since they offer the end-user a great variety of characteristics not found in other paving and maintenance materials. Asphalt emulsions are environmentally friendly. There are little or no hydrocarbon emissions created with their use.
-www.aema.org/page/basicsofasp...
What is SEALCOATING and why should I do it?
1. Sealcoating protects and prolongs the life expectancy of asphalt pavement by filling surface damage and providing a protective layer to keep out damaging UV rays, vehicle fluids, and water.
2. The low cost of regular sealcoating can save you money in the long run. A properly maintained and sealed asphalt surface has an extended lifetime and reduces long-term repair costs.
3. With exposure to the elements, asphalt pavement over time becomes faded in appearance. A fresh sealcoat application enhances the appearance of asphalt, making it look and wear like new.
4. Sealcoating is typically done using one of two application methods: spray or squeegee/brush.
5. Sealcoating accelerates the melting process of snow and ice on pavement surfaces. This helps to protect against water penetration, rain, frost and snow damage.
6. To correctly complete the sealcoating process, the air and pavement temperature is recommended to be at least 55 degrees Fahrenheit for the duration of the application and for eight hours following the application.
7. Prior to pavement sealing, the asphalt surface should be cleared of all dirt and debris. In addition, minor repairs, like potholes and cracks, should be filled and vehicle fluids, like oil, should be properly removed.
www.wolfpaving.com
#sealcoating #driveway #RU-vid #outdoors #diy #sealing #pennsylvania #oddlysatisfying #satisfying #drivewaysealing #paving #homeimprovement #homemaintenance #curbappeal
28 июн 2024
