The 1st Two Pressure Washing Jobs From My Van Wrap 

Thanks for the great tip. I will keep that in mind 👍

Thanks Duncan 👍

Nice one. It’s a bit different now. I haven’t eaten there myself but it’s supposed to be really good

Thanks Buddy 👍

Thanks Ian 👍

Thanks bud 👍

Thanks Jd 👍

Will do. Thanks 👍

Thanks Rich 👍

The way I work it out is to find the square meterage of the area then times it by the amount you want to charge per metre. It would be worth you finding out what that price should be for your area as it differs depending on area. It might be worth you looking at some of Smout Pressure Washing past live streams where he prices a job live. ru-vid.commMGii-f-1TM?si=t0peBgkYti6ldrar

That’s a beast of a machine 👍

Yes, I drop back when it's dry. It can be difficult getting back

HI. I use sodium hypochlorite which is a chlorine based chemical. If you aren't used to using it then its probably best if you don't as it can be very dangerous if used wrongly

@@squeakycleandave1 thank you for answering my question and for the advice, I have one more request for you, I have never used it for washing, would you like to explain to me how to use that detergent correctly--thank you for everything and stay healthy

I don't use any. it's all premixed

It’s a Dual Pumps pressure washer. Its the same one that Gutter Vacuum Systems sell

Hi Wayne It's an Evolution series 2 built by Dual Pumps. Its a 21LPM with a Honda GX390 engine

@@squeakycleandave1 thanks Dave 👍

I'm picking up loads of work from the van. Its nearly paid for itself already.

@@squeakycleandave1 have you ever leaflet dropped or do you use facebook ads

Hi Garry I've only used it once myself so far so still getting used to it. It may be a faulty unit or it may be doing something wrong so I would recommend contacting the supplier.

Hi Garry I have the same problem will not work on 21 lpm pressure washer please let me know if you have any ideas thank you

Do you have to turn down the pressure release valve to draw the hypo

All of my last step chem injectors have to be matched up to the GPM, or (LPM) on the pump. So its not the pressure as much as it is the volume. The unit works on the Bernoulli Principal where the flow is accelerated through a small tube and this acceleration causes a pressure drop sufficient to cause a vacuum pull on the soap. You will see a loss in fluid volume and that is the price we all pay for last step chemical injection USING SH without an LSCI Pump which SH would probably destroy...

Ive not used one of these but it looks like its the same as my snow gun to get it to work i have crack open the ball valve you open when starting the machine but only slightly this lowers the flow and allows it to draw

Hi Andy It’s a 20” FSC. It seems to make a lot of difference with the FSC but not so much with just the turbo nozzle

2% and 1.4% respectively at the nozzle

Yes Adam 👍

You do have to be careful what Hypo you use as well. It only becomes an issue if there is a problem then it needs to be label compliant

they used to say don't use it on sandstone but ive never had a problem @@squeakycleandave1

Depends on how you do it

@@squeakycleandave1 theres a video for you to make on how to power wash each project wall/decking etc

👍

It depends on the jobs and how you price them but as a rule yes you can