The Amazing Festool HK-85 / Beam Housing Joint Done!

Подписаться 58 тыс.

Просмотров 33 тыс.

50% 1

Beam Housing Joint, Made another mistake and Using the VN-HK 85 properly for the first time
A New way to support the channel. Send a donation direct to me via my Website - bradshawjoinery.co.uk/shop/se...
If you’d like to support the channel so we can make more videos please consider becoming one of our Patrons or sending a one off donation Via PayPal or Give Back to the channel using Super Thanks via the thanks button above.
PayPal Donation - paypal.me/OliverBradshaw
Patreon is a simple way for people to support the channel with a minimal monthly subscription.
If you'd like to support us go to our Patreon page here - / bradshawjoinery
Or you can buy me a beer here - BuyMeACoffee.com/BRADSHAWJOINERY
Help support the channel when shopping on Amazon, if you click this link below before buying anything on amazon, I will receive a small percentage of the sale price. It will not cost you any more, so please help me out if you can.
UK: amazon.co.uk/?tag=bradshawjoi...
US: amazon.com/?tag=bradshawjoi0c-21
INSTAGRAM ► / bradshawjoinery
FACEBOOK ► / bradshawjoinery
WEBSITE ► BradshawJoinery.co.uk
#Joinery #Woodworking

Хобби

Опубликовано:

27 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 52

@simonh73 10 месяцев назад

Mafell mised a trick of a great sponsorship deal with this series :)

@denty32 10 месяцев назад

It’s a privilege to watch you work 👏👏

@BradshawJoinery 10 месяцев назад

Thankyou mate

@MariaMavridoglou 10 месяцев назад

Really enjoying your RU-vid content, particularly when you voice your thought processes and decisions.

@bobx2387 10 месяцев назад

Really enjoy all you do... Just wedge it. There is something magical about finding "where the bloke made good". I found that on a big house I worked on and it was probably done in about 1908 and I know it is there (wish I'd taken a photo) but probably it will not be found for another generation. Bob (Weston super Mare)

@PaulWoodJatobaFilms 10 месяцев назад

Id add a wedge as well in that gap, you probably won’t see it unless you’re looking for it. Great content, Oliver, really enjoying it! Thanks!

@Ianf1x 10 месяцев назад

Put a fill in peace with your initials on . I am really enjoying this build showing top notch problem solving.😀

@MA.Joinery 10 месяцев назад

absolutely loving this series 👍

@CreativeCarpentry 10 месяцев назад

A great plug for Festool hk85 . I reckon cut and rejoin the last section to hide the “ Bradshaw character “ but leave 90% of the half lap ? Think that keeps the strength and the aesthetic , one of many ways 😊

@gaynorjasonjack 10 месяцев назад

Great Vid. Thanks a mill.

@dougsaunders8109 10 месяцев назад

I would go with the Bradshaw character. Having seen you match stuff up, only you will know! Plus you you tube watchers of course HK is a beast

@spitNsawdust 10 месяцев назад

Decorative wedge for the gap maybe, the kind you used to see in kitchen table lower horizontal braces ✌️

@sp2032 10 месяцев назад

continue the mortise width as a groove to the end and disguise as the throat of the mythical monsteer you will no doubt be carving as decoration for the end !

@jimbartley9125 10 месяцев назад

Another great video. I think a wedge matching the grain will work best. Looking forward to seeing you put it all in place. Cheers. Jim

@michaelplays2449 10 месяцев назад

Fantastic work !!! Great video..........thank you !!

@BradshawJoinery 10 месяцев назад

Thankyou as always Michael

@simonvanellis2945 10 месяцев назад

To be perfectly honest, I think anyone making anything will have an internal desire to be absolutely perfect 100% in everything we make and do, however in this case I would have cut a block to fill the gap and if the client then noticed, make an apology and offer to take it all down again and recut it. I would bet that 99 out of 100 clients wouldn’t either care or notice. There is always another way of compromise, just don’t bring attention to something that is aesthetic and not structural. Loving your work. I’ll be hiring my chain morticer, having seen they are £1700

@ruaraidhmaccormick4677 10 месяцев назад

A drop of glue and sawdust mixture 🤓🫣😂

@lwilton 10 месяцев назад

Hole patch: How about trim the tenon back 15 mm, then make a plug that is 10 or 12 mm plus the width of the extra mortise, and most of the depth of the mortise. Glue and maybe a pocket nail or screw (or dowel) to hold it in place. That gives you a plug and a nice solid edge to the mortise to resist any chance of the post wanting to tip.

@jeffsmith2144 10 месяцев назад

Keep them coming mate 😊

@pauljackson5482 10 месяцев назад

Go for the character look. Or make a cornice type detail for all of them. 😢😂

@charlesjessop2238 10 месяцев назад

Remember to wear steel toe caped boots Green oak will do a lot of damage

@bigal6789 10 месяцев назад

Why not make the Bradshaw Character into a time capsule, put the video footage on to a micro sd card of way a patch is there, put the sd card inside and then add the wedge, who knows who'll find it. Great vlogs.

@Dazza19746 10 месяцев назад

I’m almost thinking a sort of small stepped ‘bracket’ to ‘support’ that overhang…..😜 But there’s nothing else like it🤔 might have to run with the ‘character’ and do the awkward cut wedge. Edit: actually I might be onto something, try a little piece that mirrors the space left between curved brace and corner and see how it looks, and try a stepped version of same ( 25 mm from End steps down, goes in, steps down… get it? Take those two and the wedge to job and ask customer what they want ( if your fessing up, which you’re going to have to with bloody video!) That’s your Persian flaw mate! Tell them only god can create perfection, so to stay humble we need to add a flaw like the Persians did in their rugs ( I’m not having a pop at your brother going on about rugs btw!! Weh hey!😜😂. ( I’m as bald as a baby’s bum too!)

@ColinDH12345 10 месяцев назад

Whatever you add to that gap, add the same thing to the corresponding beam coming in at 90 degrees. Maybe a wedge or a simple corbel. As long as it's duplicated it will look totally planned. Only at the ends of the beams... not at every post. Great job but I know the only thing you will focus on is that gap. I'm just the same ;-)

@mjcooperman 10 месяцев назад

Yeah, folding wedge. Only you will know, just don’t point it out! Cracking job, lad.

@stanley626 10 месяцев назад

Add a corbel type piece that continues from the decorative end cut to the beam?? Just an idea

@kevinbowden1155 10 месяцев назад

Great man glitter episode 👌

@BradshawJoinery 10 месяцев назад

👌🤣💪

@moomastico 10 месяцев назад

put in a covering moulding detail like an oak leaf or something.

@dorob.7601 10 месяцев назад

👍

@canalboating 10 месяцев назад

coming along nicely, was wondering how you would lift them in place on site and presume that's in the next video

@BradshawJoinery 10 месяцев назад

👍 yeah George's idea will see if it works tomorrow... video probably Wednesday

@frankmatibs8076 10 месяцев назад

I think you can turn the fence over and it sits fly’s flush with bottom of saw But I may be wrong

@frankmatibs8076 10 месяцев назад

Flys shouldn’t be there

@AndyCarnegie 4 месяца назад

You ever tried a cross grain chain Morticer like the Maffel or the Swisspro?

@BradshawJoinery 4 месяца назад

No, i havent to be fair!

@frankblack1481 10 месяцев назад

Harry’s Farm is also good

@BradshawJoinery 10 месяцев назад

Yeah! He's great how he opens up expenses etc. I also watch Olly blogs and George Saunders a bit

@ridgmont61 10 месяцев назад

I would knock and glue a wedge in of the same grain then trim it flush, it will never be noticed.

@BradshawJoinery 10 месяцев назад

I think it might be best to disguise while apart yeah👍 I have a really good backup plan if not!

@derekrobertson1548 10 месяцев назад

When doing the install, are you going to let the customer knock the last peg into place. I am sure I read somewhere that's what used to happen when an oak frame house was getting built. Was meant to bring good luck or something like that.

@derbyshirebirdwatcher6054 10 месяцев назад

Why not carve some small insignia (like Mouseman’s mouse) and use it to cover your unwanted gap?

@thomasnourse7506 10 месяцев назад

Slide a wedge in and flush cut it

@mrnormski9005 10 месяцев назад

So you have a machine for the installation, how dissappointing😢 i'd had visions of a massive wooden tripod & block & tackle, thick hemp rope & your brother pulling his guts out & you shouting heave, right a bit, left a bit, well it worked for the Egyptians on the pyamids😅 ive got to say tho ive really enjoyed how youve presented this project with the bite size videos

@vanzipper6486 10 месяцев назад

😂👍

@raydriver7300 10 месяцев назад

I know I like shorts as they match my attention span but I was disappointed when this post finished so quickly. I’d put a small wedge in that hole myself but who am I to give you advice? Also…. I was thinking of a carpenter’s pun but nothing woodwork. 🌞

@BradshawJoinery 10 месяцев назад

Haha 😂, there was a lot of footage in this one I don't know how it ended up so short!

@UKRussellSmith 10 месяцев назад

Definitely a wegde. If it was 100mm I'd say different but for 10mm a wedge will be fine. If you hadn't put it on RU-vid no one would have ever noticed it anyway.