The Ancient Invisible Fastening Pins of The Antikythera Mechanism

Подписаться 102 тыс.

Просмотров 68 тыс.

50% 1

Taken from " #antikythera Fragment #10 - #ancient Tool Technology - The Workshop" • Antikythera Fragment #...
You can also help me make these videos by purchasing via the following Amazon Affiliate links:
Cameras:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Books:
"Solidworks 2013 Bible": amzn.to/2FObS1D
"Machinery's handbook": amzn.to/2pi7XE5
"Lathework: A Complete Course (Workshop Practice Series)" - amzn.to/3Zt1DJM
"Drills, Taps and Dies", Tubal Cain: amzn.to/3wUFNA7
"Hardening, Tempering & Heat Treatment", Tubal Cain: amzn.to/2IdTQLw
Tools & Shop Products:
Sherline Lathe: amzn.to/2pnXM19
Sherline WW collets: amzn.to/2FYZ7F8
Optivisor Headband Magnifier: amzn.to/2HFg1FU
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: amzn.to/2tTEPb0
Digital Caliper 6 inch/150 mm Electronic Vernier Calipers: amzn.to/2EArNRU
Interapid Dial Test Indicator: amzn.to/2FPInwH
Saint Gobain (Norton) - 4 Arkansas Stones + case: amzn.to/2HCOAMX
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: amzn.to/2DR5fdb
Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: amzn.to/2ITfeTa
Heavy Duty Arbor Press: - amzn.to/46HdTZV
YG1 NC Spotting Drill 8% Cobalt HSS 1/8 to 1/2" 120 Degree 5 Pc Set CNC Machine: amzn.to/2G7ylv6
Magnetic Base Adjustable Metal Test Indicator Holder Digital Level 14" - Tool Stand: amzn.to/2PkyoTV
Proxxon 37172 Micro Band Saw MBS/E: amzn.to/2ONORR1
Anytime Tools Angle Block Set 1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30° Precision +/- 20 Seconds, Machinist Tool, 10 Piece Set: amzn.to/2QFqM2Y
Consumables:
Dykem 80300 Steel Blue Layout Fluid: amzn.to/3LvNAO8
Bergeon Professional Cleaning Rodico: amzn.to/3LyKKb3
Blue Matador Abrasive Paper: amzn.to/3PRnQhJ
Moebius Multi-Purpose Lubricating High Grade Swiss Oil: amzn.to/3PNNK5M
General Purpose Latex Finger Cots: amzn.to/3ZsYrhi
Proxxon 28174 Band saw blade for MBS/E Swedish steel, fine (24 TPI), Silver|Silver metallic: amzn.to/3RzIV1l

Опубликовано:

23 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 125

@christopherbrand5360 10 месяцев назад

Absolutely riveting!

@notfeedynotlazy 10 месяцев назад

You nailed the pun

@brackpin 10 месяцев назад

You were fastened on that one.

@TheChzoronzon 10 месяцев назад

This should be Pinned

@rallymax2 9 месяцев назад

I don’t see the point.

@LittleAussieRockets 9 месяцев назад

Had me glued to my screen

@dimachok 10 месяцев назад

5 minutes of cozy video = 3242739238473284 hours of work

@salamisalesexpress 9 месяцев назад

I noticed the leather washer to protect the drilled item from the chuck when it breaks through. Great tip!

@Malakawaka 9 месяцев назад

How I've missed your Antikithera videos. I love them always

@WreckDiver99 10 месяцев назад

How many times when he touched that bracket/bar/strap did it move on him? If it was me? EVERY SINGLE TIME. The patience you show Chris is nothing short of amazing.

@StefanAxelsson 10 месяцев назад

For me, it would move. And probably the one time it didn't I'd get so happy I'd jump in my seat...and move it. Also, found myself holding my breath not to disturb that bracket. :)

@JO-ch3el 9 месяцев назад

This is so amazing I hope to one day see the mechanism completed!

@jimgoodwin6440 10 месяцев назад

Happy to see you're still working on this project. It's amazing as is your work.

@SauronsEye 10 месяцев назад

The patience and perseverance of this bloke to do all of those rivets to that level can't be overstated and I have some perspective on this. I made an all metal screw driver in High School metal work. It was made of two main parts, the handle and the shaft. I connected them with a straight rivet in a hole that was counter sunk on both ends. I peened over the end of one end of the rivet and inserted the rivet into the hole, clipped off the excess on the non peened end and then peened that end as well. Continued to peen the ends till they fully filled the counter sunk holes and proceeded to spend hours filing down the rivet heads till they, "disappeared", into the surrounding metal. As you get closer to the rivet, "disappearing", the slower you need to go to not ruin your work and my effort was for just one rivet and I've never done it again and probably don't want to but this bloke...wow, so many rivets. I expect he'd be a lot faster than I ever was with my High School effort but I'm sure there were a few hours of work here. FOOTNOTE: I always wondered why we didn't just make the screw driver from one piece of metal on a lathe but my teacher wasn't very good at explaining what I figured out for myself many years later that the reason for making a two part screw driver and then making it look like it's one piece of metal was to learn skills of measuring precisely the diameter of the shaft and the hole it was to go into and then demonstrate our riveting skills.

@KenFullman 9 месяцев назад

It's a lot easier with smaller rivits and a lot easier still when they're made from brass (instead of steal).

@532bluepeter1 9 месяцев назад

The blade of a screwdriver also needs to be of a heat treatable steel unlike the handle.

@deshazo_henry 10 месяцев назад

I really enjoy how you use the visual and audio effects as a sort narration tool to move the story along in your videos.

@JaenEngineering 10 месяцев назад

One thing that stirkes me is the number of different methods used. This could have achieved using solf solder (which we know they had) with much less effort yet they went this route instead. Its almost as if this whole thing is less about the mechanism itself and more about practicing skills. A bit like how modern day apprentices are required to submit pieces to demonstrate they understand a technique.

@vizionthing 10 месяцев назад

Imagine one day we invent a time machine only to find out this was some high-schoolers homework!

@PetesGuide 10 месяцев назад

What is “solf solder”? I’m not sure if it’s a typo for “soft solder” or something distinct; Wikipedia makes no mention of it and I see it used on machinist forums but never see it defined.

@Galerak1 10 месяцев назад

Maybe they realised that the localised heat needed to melt the solder would distort the spiral out of shape beyond tolerance. That's my guess anyway.

@Halinspark 10 месяцев назад

Solder joints would stand out on brass. Something this elaborate is going to be expensive, and the people who can afford one are going to want it to look good. Especially considering it's purpose is pretty niche, so the people who even have a use for it are probably going to want people to know they have a nice, good quality one.

@asicdathens 10 месяцев назад

@@HalinsparkExactly. This is the ultimate gadget for the gentleman of the Hellenistic period, like an expensive Swiss watch. Do you like blemishes on your $10000 watch?. Even back then luxury items were well sought. Jewelry from the antiquity is also exquisite

@markdoyle9642 10 месяцев назад

Stunning, Beautiful machine Landscapes and soundtrack, RESPECT! Thank You, Chris for doing such artistic work!

@AIM54A 10 месяцев назад

Amazing how well those pins just vanish.

@vizionthing 10 месяцев назад

When your work is so perfect the shot looks like a 3D render! (4:35)

@ChristopherHallett 10 месяцев назад

"OMG how is all of your work SO amazing?!?" Because Chris spends more time, care, and effort riveting a few brackets on than most people put into their ENTIRE project from start to finish.

@matthewsykes4814 4 месяца назад

I am still in awe of your skills mate. I love watching you hide the pins in every build. I know it'a little thing but it looks amazing.

@scotthutson736 10 месяцев назад

It almost seems magical watching those pins disappear. Nice video, Chris!

@meeponinthbit3466 10 месяцев назад

It is magic.... This dude is a friggin wizard. I'll never be convinced he's a mere mortal like the rest of us.

@Danger_mouse 10 месяцев назад

There's 'next level' attention to detail, and then there's Chris at Click spring above that!

@michaeldimmitt2188 10 месяцев назад

Beautiful to watch. I love seeing something done well.

@rimmersbryggeri 10 месяцев назад

This riveting technique is so elegant.

@dansv1 10 месяцев назад

That answers the question I’ve had for a long time about the floppiness of the helixes.

@nateamus3920 9 месяцев назад

This short clip represents 14 hours per day for 14 days straight setting 18 brass rivets using ancient methods. Sisyphus chocks his boulder to applaud you, sir.

@curmudgeon1933 8 месяцев назад

I count 36 rivets...i think Sisyphus would have given up and gone home. lol

@nexpro6985 9 месяцев назад

The beauty of backlighting.

@leslieaustin151 10 месяцев назад

Always a touch of the wonderful seeing your work Chris. Thank you. Les in UK 🇬🇧

@JasonOvalles 10 месяцев назад

Brilliant montage! I feel like I knew what was happening without getting bogged down with details.

@YuriyKrivosheyev 10 месяцев назад

The most amazing thing is, thats about a backside! That “no one” will see ever. True Masterpiece approach. Thanks alot!

@KSCPMark6742 10 месяцев назад

Gorgeous as always. I was wondering if there have been any episodes demonstrating how the base material, such as sheets and rods was manufacturered?

@briancavanagh7048 9 месяцев назад

I was wondering exactly the same question.

@kristoferson_0423 9 месяцев назад

This is a clip channel. There are longer, narrated videos on the main channel about the Antikythera; The fragments playlist is more about the tools and materials that the original craftsmen may have had access to, while the main playlist is primarily about manufacturing each component and what methods the craftsmen may have known or used.

@LGJM83 10 месяцев назад

So clean it looked like a 3d render on that 3rd to last rotating shot. Your work is always so impressive!

@NV..V 10 месяцев назад

Antikythera Mechanism!!!!!! Yes - thank you.

@MyMiniHomeWorkshop 10 месяцев назад

You have the patience of a saint 👍

@yeahboiproductions7065 10 месяцев назад

Beautifully done again Chris :) 👏

@elfutbolphenom 10 месяцев назад

So good! I can’t wait for the next main channel upload!

@phatputer 10 месяцев назад

Well that was a lovely way to start the day, very relaxing.

@interstellarsurfer 10 месяцев назад

Beautiful work, as always. 👍

@theoutbackshed 10 месяцев назад

Nice and precise work as always.

@SmartToaster 9 месяцев назад

Absolutely stunning editing, I had no clue what I was looking at but went over to your main channel to follow along

@tomkemp7566 10 месяцев назад

Great stuff Chris 👍

@davelightfoot2913 9 месяцев назад

Love to see an update on the antikithern device.

@edgeblur 9 месяцев назад

Wish I could give this more than one 'Like'.

@Chr.U.Cas1622 10 месяцев назад

👍👌👏 again and as always. Best regards, luck and health in particular.

@Farmfield 10 месяцев назад

Just amazing. I wonder what more we lost to history, in regard to ancient clockworks. There's no way it was just used for this machine. Though surprising nothing like this has never been found in digs, like at Herculaneum...

@BSpinoza210 10 месяцев назад

Sadly, most of the tooling he uses is susceptible to rust, corrosion, or the elements. Copper and brass can break down quickly, and forget about finding wooden tools with metal inserts. Also, there are probably a ton of undiscovered sites around the Mediterranean that haven't even been uncovered, or were built over to make way for new stuff.

@fisharmor 10 месяцев назад

@@BSpinoza210 The mechanism he is reproducing was under salt water for 2200 years and was in good enough condition to figure out how it worked... I wouldn't call that breaking down quickly. The real culprit is the fact that the materials used have all been valuable since prehistory and remain valuable today. Saving things for historic reasons is a new concept, about a century old, and it's not even universal over the world - consider the Afghan Buddhas that were dynamited just recently, the effort to move Abu Simbel by literally rock-sawing ancient Egyptian statues in pieces in the 1960s, or the untold losses that happened as a result of the Three Gorges Dam. As another related example, if you study armor, you find that there are really few examples of extant armor prior to 1500 or so: so few that people who are into armor tend to know them individually. That's because the iron and the labor were both expensive, so anything roughly in the shape you wanted that was hopelessly out of fashion would have been sent to a smith to be made into a new piece. But as soon as armor stopped being militarily relevant, it stopped getting recycled into new armor and just sat around in armories for a while, and then it became more cost effective to just smelt new ore than to recycle it. But even as recently as WW1 people were hucking 16h century armor into the wagons that went through town during iron drives. The fact that the Antikythera mechanism was under salt water is likely the REASON we have it. If it wasn't lost then it would have ended up in someone's junk pile and less than a century later the owner would have noticed things weren't moving smoothly after so much use, thought "the calculation of the games isn't even right anymore, what a piece of junk" and sold it for scrap.

@teeanahera8949 10 месяцев назад

@@BSpinoza210Rust and corrosion are the elements, O2 at a guess…. 😊 some copper and or brass/bronze stuff still survives from 8,000 years or so ago (& yes I just looked this up) so I don’t think they’re so lost or unable to survive down through the ages as you portray. “A famous hoard of copper prestige goods comes from the Nahal Mishmar cave in Israel where more than 200 such items were carefully wrapped in reed mats and buried in the Chalcolithic period, perhaps in the 5th millennium BCE”

@Caldoric 9 месяцев назад

The devices could have been seized by conquerors or looters and destroyed/resold, respectively.

@ConanBagley 10 месяцев назад

The craftsmanship you exhibit is scarcely seen anymore.

@oldschool1993 10 месяцев назад

King of Greece- " Hey when is the next full moon?" Technician- " Give me 10 years and I'll tell you."

@jmumbauer 10 месяцев назад

The quality of your work as well as the video productions are incredible

@SeagullWaterPurifier 10 месяцев назад

Beautiful work and love to see it progress every time and anticipating the next video yay 🥳

@user-ve5ei2xe8h 10 месяцев назад

That's amazing! How did the old ones manage to get the cone taper on their drills and pins to match exactly?

@GoblinKnightLeo 10 месяцев назад

My first thought is to create the taper, then use it to create a tapered hole in a metal block, then use the block to make pins. Of course, if the pins are even slightly malleable then that level of precision is unnecessary.

@theselectiveluddite 10 месяцев назад

Using files (Chris demonstrated how the ancient Greeks would have been able to make them) and abrasive stones, it's quite straight forward making pins and broaches (the hand reamer with the little wooden handle Chris used to adjust the hole's shape). Old Horology books I've got cover filing up pins as a common task for holding various parts of old watches together. Only takes a few minutes per pin; less if it's something you've made 100's of :) Using similar methods I've made and sharpened broaches as well. It's amazing how basic a tool kit is needed to achieve fantastically precise work. Cheers

@ServantOfBoron 10 месяцев назад

I can't wait for the next proper episode of the Antikythera Mechanism construction

@TheBoatPirate 9 месяцев назад

Dudes gonna get richer by being the master machinist that perfected the antikythera mechanism for the masses. ❤

@tophe57 10 месяцев назад

Bonjour. Je suis sincèrement admiratif à chaque vidéo. Bravo

@jackalovski1 10 месяцев назад

Is that scotch-brite period accurate?

@Halinspark 10 месяцев назад

The Scots hadn't been invented yet, but greek-brite is super hard to find nowadays.

@EleanorPeterson 10 месяцев назад

I can imagine the original Antikythera Mechanism constructor - working away on invisible details that he knew would never be seen or appreciated - wishing that Prometheus hadn't just stolen fire from the gods, but had also picked up the blueprints for some kind of magical 'seeing-inside-things-with-special-rays' device which would give people a proper understanding of exactly what he'd been getting up to. [☢️ 👀]

@klausbrinck2137 10 месяцев назад

The "invisible details" that he knew would never be seen or appreciated, were very well seen and appreciated already back then, by many... People knew what to appreciate back then too, and this wasn´t an one-off, but just one of several identical mechanisms built... 2.300 yeard is a lonf time for other mechanisms to survive, let alone several of this same one...

@campbellwoodward3275 10 месяцев назад

So when are you able to upload more antikythera videos on the main channel

@heighRick 10 месяцев назад

Yes! ..sees Chris video, watches :)

@GROWBY82 10 месяцев назад

Sehr nett anzusehen

@ChazzC 10 месяцев назад

How can you give two thumbs-up??

@Druforithe 10 месяцев назад

looks so good!

@herculesrockafeller 10 месяцев назад

Oooh! Antikythera content!

@mikebenza 10 месяцев назад

Why did you ream the holes in the plate and the supports separately? Wouldn't it have been a (barely) better fit to hold the pieces together, ream them, then fit the pin?

@elterga6224 10 месяцев назад

YEAH BUDDY!!!

@Nobilangelo 10 месяцев назад

The original designers and makers would be astonished beyond measure to see this. So would the captain of the ship that sank with it.

@chandradharkoneti 10 месяцев назад

Hello, Chris. Any reason why you didn't place that corrugated strap in place and braze/solder the two plates together??

@cest7343 10 месяцев назад

Haven't I seen this I wouldn't believe my own eyes 😂

@sdrc92126 10 месяцев назад

I can't wait for the free giveaway at the end. Right? Right?🤞😁

@strangeplanet8313 10 месяцев назад

What wonder is this? Not the Antikythera mechanism, that is well known, but a new video about it - even rarer.

@rodneyrouchy7130 10 месяцев назад

Surely more accuratly built than the original

@ilikemorestuff 9 месяцев назад

Geology is cool, man!

@ilikemorestuff 9 месяцев назад

ClickSpring was accepted into the Happy Tappers at the age of Yoda :D

@lanlantheman 10 месяцев назад

Amazing

@foadrightnow5725 10 месяцев назад

Hell, I would've just used some clear 2-part epoxy and called it a day! But not you...obviously! Outstanding work, as usual! How many man hours did this take? Cheers!

@peterestrada9420 10 месяцев назад

“I Can See!”, said the blind man…., when he hit the Pin😉😏 Love the Production’s & when do we get our: “Build Your Own”, kits⁉️🤨 For goodness sake, Take My Money, already 💵 🙏🤣

@eotwh 10 месяцев назад

You might spot face, if your pump drill can be rigidly located.

@John-to2ki 10 месяцев назад

Where do you get your brass pins and reamers from?

@GlutenEruption 10 месяцев назад

Is there a reason why the builders would have gone through all the extra effort of pinning those bridges to the dial plate as opposed to just soldering them (I’m pretty sure you’ve shown other parts of the mechanism that were soldered, right? So it’s not as if it wasn’t an option) It seems like soldering would bond those pieces together even more rigidly than the pins, and would take much less time and effort. The only thing I can come up with is solder might accidentally bridge the spiral? But soft lead could easily be filed away or removed with a scorper or something so I don’t understand the choice.

@EngineeringCommonsLLC 10 месяцев назад

Maybe distortion of the plate from the heating? If the spirals were cut later in construction that could risk misaligning previously installed parts

@notfeedynotlazy 10 месяцев назад

You must remember that, unlike today, it was MUCH easier to rivet than to solder.

@Halinspark 10 месяцев назад

Keep the design looking neat? Solder joints would stand out.

@cymeriandesigns 10 месяцев назад

My guess: it would have been difficult for the ancients to get heat only to the proper parts of the mechanism for soldering, and general heating would have risked distorting the larger structure. Or maybe riveting was just easier for them because maintaining precise position while soldering would be a pain.

@adrianwilliams763 10 месяцев назад

Perfick. As usual.

@VladekR 10 месяцев назад

Just magic 👍👍👍👍👍👍👍👍

@mmcconnell434 7 месяцев назад

Why do the pins need to vanish?

@doluggs 10 месяцев назад

Fascinating as ever. But it doesn't explain, how the old Greeks made the pins themselves. Sorry for reposting my question. Greetings from Switzerland - home of many beautiful mechanical toys.

@backi480 9 месяцев назад

or a simple Rivet

@Qfeys 10 месяцев назад

Does anyone know why the pins stay in place? Is it just mechanical stress, or is there some sort of cold welding going on?

@doluggs 10 месяцев назад

pure friction. The pins are slightly conical - as is the file to widen the hole as needed. You can see that somtimes it takes only two or three strikes to acheive a solid fitting. The hammering / finalizing pulls the two pieces together and solidifies the joint.