The Best Adjustable Gas Block Ever - For Real the RifleSpeed AR15 Gas Block Delivers!

Подписаться 143 тыс.

Просмотров 65 тыс.

50% 1

We all know that adjustable gas blocks help regulate gas, make shooting suppressed better and so on. But they are a pain! Having to bring with tools, long hex keys. to get under the rail, all those days are gone. This is the best, most rugged way to approach the adjustable gas block that I've ever seen.
Be sure to check out our website for more.
www.gunsandtac...
Social Links:
- Instagram: bit.ly/3oelbin
- Facebook: bit.ly/2T9lP2c
- Twitter: bit.ly/34bAMXE
- Patreon: / gunsandtactics
- Note for RU-vid: The portions of this video featuring the firing of a firearm were conducted at a specified range facility in a controlled, safe environment under the direction of instructors or range safety officers. Any assembly or disassembly is for the purposes of showing safe and proper repair or maintenance. ALL OF OUR CONTENT IS IN COMPLIANCE WITH YOUR AD CERTIFICATION POLICY. THIS IS ALSO A LAWFULLY OWNED SILENCER MANUFACTURED AND POSSESSED BY FEDERAL LICENSE HOLDERS.
- The views and opinions expressed in this video are solely those of the original authors and contributors. These views and opinions do not necessarily represent those of Guns & Tactics, the administrative staff, and/or any/all contributors to this site.
- Affiliate Disclaimer: Guns and Tactics is reader/viewer supported. This post may contain affiliate links and we may earn a small commission when you click on the links at no additional cost to you. As an Amazon Affiliate I earn from qualifying purchases.

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 135

@woe2thet1m1d6 10 месяцев назад

I have 1100 rounds on my 18” SPR with the RifleSpeed gas block. I never clean it, just put two drops of oil on the plunger and rotate the ring twice after every range session. No issues and no plunger erosion with full power 556.

@masonallison6100 3 месяца назад

What length gas system, handguard, and selector do you have? I have a 18inch with rifle length and a 15 inch handguard. Thinking about choosing the 3.3 inch selector but I want to make sure it’ll be long enough.

@bretaschleman8289 2 месяца назад

I like the superlative arms adjustable gas blocks. Excess gas goes out the front of the block. Not into your action or suppressor. You do need a Allen to adjust but they're easy to tune and cheaper at around $85.00

@lyfandeth 11 месяцев назад

The other point, is that if you allow just enough gas for reliable ejection, you get more gas behind the bullet and more velocity. Which is why the FAL has one from the factory. FALs can also SHUT the gas completely, making the gun into a bolt action, but putting all the power behind the bullet. Nice that after 50 years, someone added a simple gas regulator for the AR.

@fastshuther 8 месяцев назад

Would love the bolt action adaption to the ar 15, would you be able to shut the gas completely with this regulator?

@mikelane2258 6 месяцев назад

I've seen test of rifles with the gas block fully open and also fully shut. The difference in velocity is negligible. As in less than 10 fps. It is kind of surprising, but it doesn't make much of a difference.

@MF-Rell 5 месяцев назад

Not really

@jjacres129 11 месяцев назад

I’ve put them on my last 3 builds I love them so easy to use

@DustyS5050 11 месяцев назад

I have that block with the 5 inch extension dial. Love it!

@derek3154 11 месяцев назад

I would consider these now that the price has came way down💰😉

@johnphillips222 11 месяцев назад

The intro was pure AR ASMR...

@ednogaski8806 11 месяцев назад

A very nice idea making gas adjustment easy and simple

@SoBaLaT 5 месяцев назад

🎯 Key Takeaways for quick navigation: 00:00 *🛠️ The RifleSpeed adjustable gas block is the speaker's new favorite for the AR platform.* 01:32 *🏆 RifleSpeed's gas block is hailed as a truly innovative product in the industry, offering significant improvements over traditional designs.* 03:23 *💡 The gas block features a unique control knob design, providing easy adjustments without the need for tools, with 12 levels of adjustment.* 04:05 *🎯 Adjusting the gas block allows fine-tuning for suppressed and unsuppressed shooting, optimizing reliability and reducing gas blowback.* 05:44 *🔄 Video demonstration showcases the gas block's effectiveness in adjusting gas flow, enhancing cyclic rate and ejection patterns.* 07:34 *⚙️ The gas block is designed to fit under the handguard, with different lengths available to accommodate various setups.* 09:37 *🧼 Maintenance is simplified with easy disassembly for cleaning, with instructions provided on the company's website.* 12:53 *💪 Installation options include pinning the gas block to the barrel for enhanced reliability.* 14:15 *💲 The RifleSpeed gas block is priced at just over $200, with various lengths and accessories available for customization.* 15:25 *🌟 The speaker praises the RifleSpeed gas block as a truly innovative and rugged product, offering unmatched adjustability and performance.* Made with HARPA AI

@merdith6 8 месяцев назад

That's pretty cool I've had really good luck with my Aero Precision adjustable gas block I like it because it's really low profile and it doesn't get into the handguard as easily and has plenty of adjustments and doesnt lock up

@Hustler_state 7 месяцев назад

Same, and I have the old skeletonized . 625 on my faxon 16mid. I would love to have one like this where it's available at the end of the guard. I run suppressed and non essentially at 7clicks with similar ejection pattern and lock back

@rachel81962 8 месяцев назад

The install will be more than 95 percent of AR owners will be able to do.

@benjii7668 7 месяцев назад

That's why we have gunsmith

@Hustler_state 7 месяцев назад

Great idea. But 200$$ nope. I'll keep my aero adjutable and just carry a single 8" allen

@Maximusprimeatyahoo 28 дней назад

I bought 2 of them about 3 years ago, the beauty of them is the simplicity of them.

@Rossski 11 месяцев назад

I felt the need to double up on the wave springs since my dial had a little bit of play but over 500 rounds through it so far and it's been great

@hairydogstail 10 месяцев назад

I did the same thing..

@invertedpolarity6890 9 месяцев назад

I just added the RS gas block to two of my rifles. Immediately noticed the single spring just did not feel like it was enough for positive detents. And the block does indeed work great.

@noquartergiven7789 11 месяцев назад

What are the jigs you use to dimple and pin your blocks? Thanks for the great video.

@hairydogstail 10 месяцев назад

SLR

@fireyourrocketts 9 месяцев назад

Beautiful; I got one bad thing for you; PRICE, LOL and needing a straight gas tube helps a lot with prices as well, really nice technology and like all innovations out of the hand of some enthusiasts, so I will stick to Odin and AP Thanks for the video.

@MYDOGBUD 9 месяцев назад

I'm on my 3rd now..one on my 300blk, 350 legend and AR308..I highly recommend on suppressed and non supressed ARs...

@kentoncarter1103 3 дня назад

You damn near had to manufacture it. It better be good.

@mid305 10 месяцев назад

Does it work with 7.5 barrel and any handguard

@lucasblanchard47 11 месяцев назад

Wait…RU-vid wasn’t mad about that intro sequence?! That’s awesome! Also, was this a reupload from last year or what?

@GunsandTactics 11 месяцев назад

That’s why I had to re upload

@lucasblanchard47 11 месяцев назад

@@GunsandTactics ahhhh ok I see all of the info you added in the description.

@gratefulz6035 6 месяцев назад

Wow I love it, just the part I was looking for literally!

@B.T.32 8 месяцев назад

Cool idea and each their own however just creating a point of failure in my opinion. Another point you have to look. What happens when that spring gets weak from excessive heat?

@mattthebutcher3324 8 месяцев назад

That’s kind of what I thought. Better slightly over gassed with a fixed system than having another potential point of failure. It’s all relative though. Whatever makes sense to me and you won’t be what someone else wants.

@n0xxm3rcyxx 11 месяцев назад

the best... for realsies.

@feskymaloon1439 11 месяцев назад

Cool gas block. Unfortunately it doesn’t work for my SBR because I’m running a 7.5” barrel and a 7” hand guard. I have an ASR muzzle brake/suppressor mount. And there would be no way to adjust this gas block once installed. I went with an Aero Precision block with single tool click adjustment.

@SgtEaglefort 11 месяцев назад

could cut the handguard a bit.

@Big6Duke 10 месяцев назад

would it work on a 7.5" barrel ?

@benlastname6667 11 месяцев назад

Had mine for almost 2 years. It's great but you're behind the time

@GunsandTactics 11 месяцев назад

This is a re upload. Made this a long time ago but had to take it down over a policy issue. Been running them for around 2 years as well they are great

@benlastname6667 11 месяцев назад

@@GunsandTactics ah gotcha.

@Heikin-Ashi-Larry 11 месяцев назад

How do they hold up?

@GunsandTactics 11 месяцев назад

Awesome, I have some on my main suppressed guns and no issues. Every few thousand or so I wipe it down, clean the plunger.

@not-AI 10 месяцев назад

@@GunsandTactics is this better than a bootleg adjustable bcg or do they compliment each other? The bcg is just easier to install initially.

@alphaditto 11 месяцев назад

Do they make these as a piston?

@scottwilson1258 10 месяцев назад

Thank You Rifle Speed,Thank You G&T OK,I now have installed the Rifle Speed gas system along with a mid-length gas system and a T-2 Buffer with the Rifle Speed gas Block right out of the Box ,set on #5 and my Rifle Now shoots like a Sewing machine! I can unload 5-6 shots without my barrel rising. It is Now Everything I Ever dreamed of! THANK YOU G&T You led me to this product and I am one Grateful Dude! Now we need one for an AK,They could just sell it attatahed to an AKM Gas Tube!

@ESBKLife Месяц назад

Love my RifleSpeed adjustable gas block. However, I did have the plunger lock up on me once. A little cleaning and a few drops of oil and I was good to go!

@BuckIt00 6 дней назад

I just did a build using this. I'm having issues tuning it with me silent capture spring set up. It may just need some break in time. However, I can't get the ejection right at this time. Any tips on this?

@30wrdy 3 дня назад

Try different plunger sizes

@dantebaker3921 11 месяцев назад

Where do I buy?

@Heikin-Ashi-Larry 11 месяцев назад

Jealous of any man with a mill!! Anybody know what model that was?

@GunsandTactics 11 месяцев назад

The mill?

@Heikin-Ashi-Larry 11 месяцев назад

Is it just a drill press? Couldn’t really see the machine

@GunsandTactics 11 месяцев назад

It’s a grizzly bench mill Great for small shop projects.

@Heikin-Ashi-Larry 11 месяцев назад

@@GunsandTactics looks like it spun pretty true I figured it had to be a mill.. you pretty happy with it?

@Patrick_Garrett 7 дней назад

This is an awesome idea, but Id like to see one with 4 or 5 settings. 12 is too many lol. Also, it seems too easy to turn for a duty weapon.

@GunsandTactics 7 дней назад

I like the idea of less settings.

@pjbarney9580 11 месяцев назад

really neat idea

@itsjustweezer4054 2 месяца назад

What suppressor is that?

@ScrueYu 19 дней назад

Titanium bolt carrier from Walker Defence and bolt cam pin combo from HM Defence for a really low mass bomb proof AR15 BCG. Also Walker Defence downward recoil muzzle brake or compensator. JP Rifle non reciprocating side charge handle with silent captured spring buffer weight plus suppressed weapons System integrally suppressed AR15 barrel

@kylespirk306 5 месяцев назад

Which model for a spikes tactical Spartan with a 16” criterion barrel. I believe it’s 13” handguard. And then another 13” handguard with 20” barrel?

@scottstu1710 5 месяцев назад

Riflespeed gas block on my 10.5" with Sierra 5K............awesomeness.

@ANW-019 7 месяцев назад

Thank you so much for this video. I'm fairly new to the "building" world and am starting a .300 blk PDW build and was wondering just how concerned do I need to be when it comes to replacing a "low-profile" gas block upper with this oen from RifleSpeed? Will most handguard diameter's be acceptable? Thanks again.

@ascinder 8 месяцев назад

Sure would be nice if they ever got around to releasing the .875 models. We've been waiting forever RifleSpeed...do you just hate money or what?😅

@no_handle_required 2 месяца назад

🖕 RU-vid

@mikelyon5595 11 месяцев назад

The next best thing to piston guns!

@hairydogstail 10 месяцев назад

The AR is a piston gun lol..

@mikelyon5595 10 месяцев назад

@@hairydogstail Generally, the AR is a direct gas impingement. AKs are piston guns.

@hairydogstail 10 месяцев назад

The Stoner gas system is an internal piston. Stoner's patent even describes it as such..The carrier is the chamber and the bolt is the piston. The Mini14 is more of a DI than the AR15..True DI's don't use a piston...@@mikelyon5595

@SaltyMaverick 6 месяцев назад

This is really cool. I'm just getting into AR building. I'm finishing up a pretty standard 5.56 AR-15 right now with an Aero upper, but I've got parts coming in to make my first .300 Blackout build, and I'm doing that one essentially from the ground up. I may have to get one of these gas blocks to upgrade my .300 Blackout build later. For now, she'll be sticking with the gas block I got from Ballistic Advantage.

@revell7156 8 месяцев назад

Randomly fell into this video. Judging by the sponsors on your website, I'd make a strong guess we live VERY close to each other.

@jman6090 7 месяцев назад

Wonder if you could put that in a kodiak defence wk181c

@yourmissingsock556boop3 14 дней назад

will these work on ar10's?

@GunsandTactics 14 дней назад

Yup

@christineharris9183 10 месяцев назад

Why is the gas block straight can you please tell me that thanks like your videos

@fabulouskhro4847 7 месяцев назад

why isnt this popular or the new normal ?

@JR-vv3io 11 месяцев назад

👍

@awsomedude9111 11 месяцев назад

I think the plunger can wear from excessive firing, I think 8.6 or 300 blackout would work really well

@ShepherdOfTheSilkies 11 месяцев назад

I own multiple of them but I don’t recommend it for either of those. Because the range on it is not enough to go from supers to subs and the plungers don’t get out of the way enough. Couldn’t get a 300 blackout with subs(only supers cycled violently) to cycle with a .846 plunger(smallest one then cut it down further). On setting 12(wide open) 1.2 ounce buffer 11 ounce BCG, and subsonic 300 blackout spring. Swapped it out for a standard one and the gun cycled too fast. The gas block lives on my 22” Grendel precision gun now. That works fine. It really can only keep a tune in the range of max pressure 5.56 to min pressure 223 with and without a suppressor. If you want it to work you have to max out the efficiency of your gun and MAYBE you’ll get lucky but get ready to blow money on expensive ammo.

@hairydogstail 10 месяцев назад

Use a bore scope and you can find a adjuster pin that will open and close all the way on a Rifle Speed adj gas blcok..@@ShepherdOfTheSilkies

@ShepherdOfTheSilkies 10 месяцев назад

@@hairydogstail I have a .857 pin…. Gas block is aligned…. I know what I’m doing I have 4 guns with the same riflespeed AGB none worked on that barrel configuration

@hairydogstail 10 месяцев назад

No you don't. It is easy to look at the plunger in a bore scope and see the distance the plunger moves when adjusting..@@ShepherdOfTheSilkies

@HugeCockAndBalls 7 месяцев назад

@@ShepherdOfTheSilkies I don't see how it wouldn't be possible to get it working? It goes from fully opened to fully closed if you have the right plunger

@liggerstuxin1 Месяц назад

1:52 “a nice… La’tees…”

@thomassophiea 3 месяца назад

If anyone doesn’t want to mess with any of this… buy an sig 516 upper. It has settings for suppressed and diverse conditions and zero gas blowback in your face suppressed. This was figured out long ago :)

@joshb5719 Месяц назад

Too bad sig discontinued the 516

@0661mike 6 месяцев назад

I've been waiting for a .625 version.

@IwatchFilm 5 месяцев назад

They have it now on their site.

@jessewrigley5664 10 месяцев назад

Looking good dude. Impressive weight loss.

@Oldspartan65 5 месяцев назад

If you have the right weight buffer in your rifle all those changes are unnecessary

@markhuffman3667 3 месяца назад

So you’re saying that there’s no need for a gas block adjustment if you go from regular ammo to subsonic if you have the correct buffer? Please explain

@BradleyRobbins-c2h 5 месяцев назад

What armorers wrench are you using and what do you use to hold your upper in the vise?

@GunsandTactics 5 месяцев назад

Midwest Ind for both.

@J.Young808 11 месяцев назад

It’s like lettuce- lattis

@caseybrown5183 11 месяцев назад

Agree. Mandatory for ar-10.

@paladinhill 11 месяцев назад

Please tell us what can, mount, and flash hider setup you have on that SBR. Thanks!!

@woe2thet1m1d6 10 месяцев назад

He's got some type of KeyMo mount and the can is a Dead Air Sandman S

@therealbzee 10 месяцев назад

This or the superlative gas block?

@GunsandTactics 10 месяцев назад

Depends on your use but I have more of these than any other. If I know it’s a set and forget then others can work but if you’re going back and forth nothing beats these.

@russhayes4882 3 месяца назад

Looks promising!

@ernestoisunza8708 11 месяцев назад

For the 300 blk out try using an adjustable gas key instead, i have one in my pistol length gas system. I purchased the key and installed to my bcg no issues encountered. I don’t shoot suppressed and I reload my own ammo just an option to consider.

@masondeleon1650 5 месяцев назад

What is a gas key.

@vcqcfoda2 10 месяцев назад

where can i get the jig for drilling the barrel?

@hairydogstail 10 месяцев назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-E2n5wrc73fQ.html

@bis5523 10 месяцев назад

Will not fit on 16 inch barrels with midlength gas and a 15 inch handguard

@GunsandTactics 10 месяцев назад

Did you check their builder chart? They might have a solution knob that would work.

@hairydogstail 10 месяцев назад

I use them on mine..

@robertlesueur2323 9 месяцев назад

Awesome? People still use that word? That is so 1980s.

@GunsandTactics 9 месяцев назад

Thanks for watching, we love awesome comments like this.

@GunsandTactics 9 месяцев назад

But for real the word fits well here. Awesome: extremely impressive or daunting; inspiring great admiration, apprehension, or fear

@davidsirmons 11 месяцев назад

Great form and function, just costs about 50 dollars too much for what it is. I keep hoping they'll come down some day.

@ryanking4942 6 месяцев назад

I have one, my rifle only shoots when its on 12. It's not all that great, go with a cheaper adjustable gas block that is just as good.

@GunsandTactics 6 месяцев назад

You can get different pistons to tune to your needs. I still haven’t found a better solution for a no tool gas block.

@ryanking4942 6 месяцев назад

@@GunsandTactics interesting. any suggestions on one I should go for?

@GunsandTactics 6 месяцев назад

@@ryanking4942 If you reach out to them and talk to Kyle, he is the gas nerd (in a good way). If you tell him what ammo/barrel and what you have now and settings it runs and doesn’t he could recommend which piston size youd need depending on what you want, ie if you want to add a suppressor, different ammo etc. He is one of the smartest guys in the biz when it comes to this stuff.

@mntrpr 8 месяцев назад

Excellent video

@5jjt 4 месяца назад

IV8888 did a meltdown with one of their own Argos uppers that had a RifleSpeed adjustable gas block and chunks were being eroded and entered the system of operation. It would be interesting to see if this would ever happen with a semi auto.

@ShepherdOfTheSilkies 11 месяцев назад

This is my favorite gas block for everything but subsonic compatible guns. It’s the most durable and maintainable system on the market.

@tedundercarriage8183 11 месяцев назад

why not subs?

@ShepherdOfTheSilkies 11 месяцев назад

@@tedundercarriage8183 adjustment range issues. Never could get a reliable cycling, subsonic gun with the gas block no matter what combinations I tried, and how light I made everything. On the 300 blackout I used as a test bed, I minimized everything to the point where it can no longer shoot supersonic either reliably due to bolt bounce causing partial extraction of the fresh round. Even at wide open or with the dial 2 rotations(pressed the detent to let it go past 12) out it was still too restrictive.

@tedundercarriage8183 11 месяцев назад

@@ShepherdOfTheSilkies did you change the rod? they sell different lengths to change the adjustment range

@ShepherdOfTheSilkies 11 месяцев назад

@@tedundercarriage8183 I changed the plunger with sizes they sell and then shorted one even more. The only time I got cycling was when I ran 300 blackout subsonic specific items in the gun with hand loaded subs that achieved 1000 fps out of the 10.5 barrel. Even made the gas port .080 on a pistol gas system. But even then it was not reliably cycling. The same gas block works on my 6.5 Grendel AR with a 22” barrel suppressor and rifle length castgas system.

@hairydogstail 10 месяцев назад

Then your rifle is under gassed and has nothing to do with the adj gas blcok..Open the barrel port..@@ShepherdOfTheSilkies

@khoinguyenphan2497 9 месяцев назад

why is it so difficult to put whatever device you are talking about in the description so i can look it up without watching the entire video?? downvoted for wasting time.

@GunsandTactics 9 месяцев назад

Im not sure what you mean, how can I help?