The Best Anvil Stand Yet

Подписаться 1,4 млн

Просмотров 194 тыс.

50% 1

Need a forge? Check this out: • Forge Build: No Weldin...
For better hammering begins here: • The Secret to Blacksmi...
Enjoy EC? Join Essential Craftsman Academy!
essentialcraftsman.com/academy
This is the best way to support Essential Craftsman and you get a LOT of perks as a bonus!
Did you know we have a podcast?
Spotify spoti.fi/39ezy3d
Apple apple.co/33dbrJQ
Stitcher bit.ly/3NWy8sY
RU-vid bit.ly/2n4HCLG
Free Starter Blacksmithing Tool List bit.ly/blacksmithingtools
Free Guide - 100 Tools Every Craftsman Must Have bit.ly/EC100tools
Buy a knife from Cy Swan here: greenvalleyforge.com/
Second Channel (Podcast video, family, misc content) bit.ly/2n4HCLG
If you are going to hire a contractor for a big project PLEASE read our ebook first!
amzn.to/2v6qZ6j
T Shirts, Hoodies, and other Merch: bit.ly/2C7JFRv
Instagram / essentialcr. .
Twitter / ecnatwad
Facebook / essentialcra. .
Like the music? Spotify Playlist Here spoti.fi/3NzAnTg
Amazon Affiliate Links:
Amazon Store amzn.to/2pcUk8G
Makita 18v Impact amzn.to/2R9uamN
4 ft level amzn.to/389qsQa
Utility Knife amzn.to/2RjVRJL
Palm Nailer amzn.to/2LhvTTd
Spencer Tape amzn.to/2EQWxPy
Carpenter Bags amzn.to/2XeBaC1
Belt bit.ly/3MsdijV
Hammer amzn.to/31y4q66
Tape Measure amzn.to/2WYg23Q
Skil Saw amzn.to/2UcQyLi
Video Equipment and Misc.
Main Camera amzn.to/2WG9qSC
Secondary Camera amzn.to/32tS2Vx
Microphone (for narration from office) amzn.to/2WquPnM
Wireless Microphone amzn.to/2IGpNto
Other Wireless Microphone amzn.to/397VmxJ
Tripod amzn.to/2XOJcOd
GoPro amzn.to/3znHgTA
GoPro Tripod amzn.to/3aL8pFH
Battery Bucket amzn.to/3GVR9cV
ActionPacker amzn.to/2l7Msqv
Learn more about Essential Craftsman
essentialcraftsman.com/
Thank you, be safe, and be grateful.

Опубликовано:

2 июн 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 239

@bobgleaser7106 4 года назад

Many years ago I fell asleep hearing the ring of my fathers anvil and woke up with the same sound. We had a farm and a welding shop Saddens me that I did not show more interest. That was over 65 years ago and I can still hear that ring when I go to bed.

@jerrymarasco8878 4 года назад

FUDDLEYP JONES lol great point

@richyearle007 3 года назад

Your comment brought a tear to my eye.Older people have so much to teach if only their kids would listen.

@josecanisales3491 2 года назад

My dad was forging after he retired, and he blacksmith when I was 2,3,4,5, etc. for a living. When I grew up I'd see him hitting red hot iron into shapes. I always said I'll ask him latter to show me how it was done. Well that day never came, he got lung cancer and died with in 6 months. I regret not learning how to forge iron. I still have his anvil and now I'm 76 years old.

@loftsatsympaticodotc Год назад

@@josecanisales3491. . . So? I'm years older than you, have numerous hammers, tongs and 3 anvils, a helv-hammer about 50 lbs. (needs serious work, as we left it outside and the wood after 15 years? badd!... The business I'm in also has a monster Nazel 4B for sale, that I hope we can sell locally so I can go "try it out". Don't let mere age hold you back. :-)

@jason-ge5nr 4 года назад

On this weeks episode of Anvil Hoarders....

@Arthurian. Год назад

Be mad 😂

@spelunkerd 4 года назад

Always a pleasure to hear this guy talk, so elegantly wise. That, coupled with exemplary audio and video skills, make this channel one of the best on the web.

@kevinhughes5046 4 года назад

I'm no blacksmith or have much interest but I have much respect for this craftsman. I subscribe so I watch. Keep up the good work everyone!

@pnwRC. 4 года назад

100% agreed!

@mikez4132 4 года назад

Was going to say the same thing...I dont know anyone who communicates anything the way he does.

@boevec1 3 года назад

Completely agree. One of the finest channels on the Interwebs.

@nitrofreakmanho 9 месяцев назад

Absolutely. This channel is gold. The dad we all wish we had growing up.

@richardmattingly7000 4 года назад

One good rule about the height of a stand/anvil together is that it should equal the distance between the floor and the knuckles of your hand as if it had a hammer when your standing upright beside it. An anvil that's to low will force you to hunch over it to use it and if to high you'll have to splay out your arms to use a hammer which imparts more shock/rotation to your shoulder. Indeed by having the right heigth your using your forearm/biceps rather than your shoulder to strike a blow and if you ever spent time hammering nails in where your shoulders more than biceps are being used you'll know why it's tiring. Most use tongs/pliers to hold a piece of iron/steel for hot/cold forging and that height is also better at hand height for the same reason. On way to get a log free is to ask someone cutting down a tree for a piece of the trunk and many are happy not to have to haul a piece away if you'll do it for them.

@yogibeer9319 4 года назад

“Bugs gotta eat too!” Same as bears. Awesome video!

@chevellechris1 4 года назад

About 10 years ago my Dad and I got on a kick of buying paper books of things we might want to know if things really got bad in the world, figured it was a good way to learn something everyone ought to know and not go crazy worrying about things. VERY first one I got interested in and picked up? Practical Blacksmithing.

@bennyc4337 4 года назад

Unbelievable to watch what a father and son have created together. Capturing Scott's decades of knowledge and love of the craft with Nate's appreciation of his father and the craft. I truly aspire in every event that my two year old son and I do together to merely tag along with what Scott and Nate have done together. Thank you for the channel, thank you for the knowledge and thank you for reminding us all what it means to share it with each other.

@curtwhite876 4 года назад

I am not a blacksmith, but this was educational and very interesting.

@JD-ub5ic 4 года назад

The nice thing about 3 legged stools and anvil stands is that if you rotate them on your floor, there is always a spot where they are level. Whereas 4 legged structures you can't do that with (unless the legs are perfectly even and the floor has a certain level of roughness). This is because of some of that math stuff they teach you in school that everyones trying to convince you that you will never use (probably more like choose not to), called the intermediate value theorem which proves this is always the case (for 3 legged stools there is some rotation of the stool such that all 3 legs touch the ground).

@zaledalen9931 4 года назад

"Bugs gotta eat too." Man, I love that attitude to life. Thanks for another great video. Much as I'd love to take up blacksmithing as a hobby, I realize that it's one of the crafts I'm going to have to take a pass on, given my age and worsening arthritis that almost precludes holding a hammer. I guess I'll just stick to wood working with power tools. That's enough. But I still enjoy your videos and, especially, your attitude. Keep'em comin' eh.

@southronjr1570 4 года назад

You could always get a treadle or power hammer. They have all sizes to be able to do just about every kind of work from fine detailing small pieces to moving some serious amounts of steel in one blow. Most treadle hammer are home built so you can make it just as you like. There is just something about moving red hot steel that woodworking doesn't bring for me. I love both and hope you can at least get a taste of it some time. Btw, I had my son's begin blacksmithing in the shop when they were around 7 and did an aweful lot using a small ball peen hammer, my oldest made his first knife that way and know has a small buisness doing it on the side.

@stevenscott2136 3 года назад

You could make a quick&dirty treadle hammer just to see if you like it enough to spend time/money on a better one. 2x4 uprights with a steel pin through them, another 2x4 in the middle so it will swing on the pin, fasten hammer to top of swinging arm. Cord from low end of arm to end of a plank on the floor, maybe through a couple of pulleys to get the sweet spot of the plank under your foot. That's the fastest-sounding rig I can think of on short notice.

@teropiispala2576 3 года назад

I made an anvil from 80kg round chromoly steel I find from scrapyard. I made a stand on it taking hard solid basalt rock from my yard, cutting one side straight with diamond disk and then casted it into concrete in 80l plastic bucket. I lapped the stone face straight and then bolted the steel on it with piece of aluminium in between to dampen the ringing. For me it seems to work really well and is easy to move by rolling on it’s side. Have anyone who knows more about forging tried similar aporoach. For me it feels like the stone is almost as good as steel to give extra weight. I chose it by hitting it with a rock and picked one which had tightest sound.

@danielrobles10 4 года назад

"Superfluous!" Wow thanks for the awesome vocabulary! The daily essential words!

@danabasiliere5417 4 года назад

Scott is an avid reader and has an excellent vocabulary.

@candace3676 4 года назад

Oh my, bugs gotta eat, too? Enjoyed this presentation. We live near Bill's homes, both of them and Sweetie worked with Bill in his young years. What learning, right? The memories remind us of how grateful we are to God for the gifts we have received! Thanks for reminding us, Scott!

@garethbaus5471 Год назад

My personal anvil at home is mounted on the end grain of a bundle of 4x4s held together with ratchet straps. The anvils at my job are mounted on sections of log. Both are great once the anvils are fastened securely.

@ChileExpatFamily 4 года назад

I used 2x12 boards dry stacked and losely held together with thread rod. I was taught this by and old timer who I demonstrated with on historical living history days. It self levels since the boards move to the ground beneath and will keep your base solid on soft ground like Cowpens National Battle Field. My anvil is only 95 lbs so it works for me and is portable as well. I like the stump base as well. Thanks for the suggestions and the video. Jim in Chile.

@robstephens 4 года назад

Great design. A heavy duty spring lock washer or a compression spring under each attachment bolt should ensure the anvil is always tight against the wood as the humidity changes during the year.

@theonlybuzz1969 Год назад

What a wonderful guy who I admire, loads of talent and of course knowledge! Greeting from the UK 🇬🇧

@regobertoaguilar6293 14 дней назад

Thank you 👍👍👍👍👍.

@badlandskid 4 года назад

“You just can’t beat the end of a log.” Isn’t that the point?

@custos3249 4 года назад

To put it bluntly

@mattlee007 4 года назад

this was simply awesome ... i live in New Zealand ... and finding an Anvil is like hens teeth ... so jealous of how many you have ... thank you for this video keep up the great work

@Marsumaniac79 4 года назад

As I didn't find a fitting stump for my anvil and wanted lots of mass, because it is on a wooden floor that swings a bit, I cast one from concrete. I put steel plates into the top so I could weld nuts on them as attachment points for the anvil. Works great, but impossible to move with an anvil that is ~100kg and a base that is even heavier :D

@stormyeffects4795 4 года назад

How has it held up over time?

@Marsumaniac79 4 года назад

@@stormyeffects4795 so far it holds up fine, but it is just a few month old. I put a thin rubber mat between the anvil and the concrete to stop the worst shock. In case it might crack I could pour a new one using fiber reinforcement with glas fibers or similar.

@stormyeffects4795 4 года назад

Marsumaniac79 Nice

@assassinlexx1993 3 года назад

If you drill hole on the sides you mount steel plates with wheels. If you need to move it, you can. Unbolt plates when you don't need them

@stevenscott2136 3 года назад

Mount Assassinlex's wheels on screw-jack arrangement (like on a boat trailer). So you attach the plates, run the screws down until the anvil assembly comes off the floor, roll to destination. No heavy lifting required.

@asifsba1 2 года назад

I want to move to wherever this guy is and apprentice for him to learn about life’s wisdom and some about craftsmanship.

@Berzerk29 3 года назад

This is one of the best channels on RU-vid hands down.

@MrCoreyjohan 4 года назад

Perfect timing for this video, I have another anvil and a large log, and have been thinking how I want to mount it.

@timberray9572 4 года назад

I have a little twenty pound anvil that I use mostly for flattening or bending brackets or sheet metal when I am fabricobbling something together. Yes, fabricobbling is a word. I recently mounted this anvil on one end of a two foot section of an 8x8 and a small vice on the other end, and now lives on the back of my truck. It is extremely handy for all those little jobs around the woodlot as well as holding the bar of my saw for maintenance or sharpening the chain.

@fenwickrysen 3 года назад

With An anvil that rings too much (your Trenton loose on a metal base) there is an old blacksmithing trick. Fill a small bucket with weight (slag, scrap, sand, water, etc.) and hang it on the horn of the anvil. What you hang it with can matter, too; you want something supple. Leather straps work well (full cowhide with the suede side on the horn); nylon straps work okay; an old bicycle inner tube holding a several pound weight looks silly but works amazingly well. I learn so much from you in refining my tradecraft; thank you so much. I'm very happy to share a tip from my past that might help you sometime. Blessed Be, Dear Sir.

@benharding5117 2 года назад

put big magnets on ur anvil

@suminagum6605 11 месяцев назад

Getting my first anvil so this is perfect info , thanks

@thebenshenanigans9048 4 года назад

Good to see you back in the shop, EC.

@wyattkindler496 4 года назад

I feel the need to add my 2 cents to the discussion of anvil stands as I've tried quite a few. I've used a few different big logs under my anvils: oak, and ash being two types I was sure about. I have to say, they always seemed to wobble and I was never quite happy with them. My go-to is a tri-legged fabricated stand. As you mentioned in the video they don't wobble and are pretty easy to put together. I added some flat bar to the bottoms of the feet with holes for anchoring to concrete; super solid. I must disagree with you about the limited amount of things you can add to a fabricated stand. I added a few pieces of pipe around the perimeter for hammers and tongs or what not but I also added a 1" inside diameter tube. This tube gives me so many options for added space. I can simply weld a short piece of 1" round bar onto things I'd like right at my disposal on the stand. This allows me to add a small work table for holding anything I need, including more slots for hammers etc. Since I used round bar with round pipe, the table also swivels which is very handy. Another great benefit of this type of stand is the wide range of actually securing your anvil. I drilled and tapped the bottom of my anvil so I could bolt it down from underneath. My 160lb Trenton has never been quieter or more secure. Of course drilling and tapping into an anvil might not be everyone's cup of tea however it doesn't negatively effect the anvil in any way. These are just a few things I've learned over the years, thanks for all of the great content this channel puts out. 👍

@jum5238 4 года назад

I'm working on understanding the deeper meaning to "Bug's gotta eat too." Lemme get back to you when I discover something profound.

@psidvicious 4 года назад

You might recognize it as a variant of the great Clint Eastwood line in the movie, The Outlaw Josie Wales - “The hell with them fellas. Buzzards gotta eat..same as worms.” ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6I6TrGedUn8.html

@danielrobles10 4 года назад

Haha

@timberray9572 4 года назад

All pine beetles must burn.

@sootlicker 3 года назад

@@psidvicious I was going to say just that, but was looking to see if someone beat me to it. Cheers!

@tristanbuckoke9121 4 года назад

Absolutely love your videos on blacksmithing. Thanks mate

@allanjgray1 4 года назад

Sir, it is always a pleasure to watch you.

@mattmaster2582 4 года назад

ES, you are my favorite channel! The next anvil i come across, it will be purchased! Thanks for the great info

@CrimeVid 4 года назад

I was taught a little blacksmithing at school on anvils that sat on cast iron bases, these things were great because they had holes for all the fullers and neckers you could want, but they were horribly loud !

@mattkaplan1316 4 года назад

Amazing stuff, helping me in my life

@patmancrowley8509 4 года назад

Love the gas forge, EC! Great ideas on the anvil base too!

@678friedbed 4 года назад

3 leg stands are easy to level and dont rock on uneven surfaces

@southronjr1570 4 года назад

A tip to remedy that using a stump is to carve a small dish in the center of the bottom side leaving about a 2 inch ledge that can contact the floor.

@markb.1259 4 года назад

Very interesting video Scott! Thank you!

@riccroft710 4 года назад

That is a really nice set up on the hammer rack, Scott. The purposeful way you planned it out and executed it shows what real craftsmanship is all about. Really enjoyed this clip, can't wait to get my hands on an anvil and forge and start to make things.

@tongandchiccreations 3 года назад

Love the last set up. I just picked up a new anvil and am in the process of bolting it down. I will try and do similar to this

@devoncopeland3528 4 года назад

Your videos are great. Keep up the amazing work! I am applying so many of the skills and techniques you are teaching daily. You have been a positive influence for me so thank you.

@mijit.859 3 года назад

I just LOVE ❤️ the legendary steel anvils - the classic shape ones plus the right anvil base stands etc 👍🏻

@peehandshihtzu 4 года назад

Cool design!

@tat2dlukydevl 4 года назад

Another gem of a Video.. what a great shop you have! Thanks for sharing.. peAce

@BlackHart9000 4 года назад

Excellent video. Y'all have come a long way. Beautifully shot and edited.

@notsuretwo 3 года назад

Wow. This video looks like a professional studio production. Thanks for all that good info.

@phildcrow 4 года назад

Another quality video. Informative and entertaining. Thanks.

@rustyshackleford5060 3 года назад

Keep up the good work!

@bestkinda4473 3 года назад

AS ALWAYS......GREAT JOB SCOTT....GOD BLESS !

@JorgeM523 4 года назад

Your videos were key in getting me started into blacksmithing. As someone else below stated, great timing for this video. I have used your list to begin in the craft and just completed building a base for my new Kanca anvil. The tips you talk about in this video have helped me rethink the placement onto the base I built. That is currently my next step, placement and anchoring the anvil to the stand. As always, love all your videos and I continue to learn.

@FletcherFinance 4 года назад

Another great video. A wonderful way to start out my Wednesday morning.

@firemanj35 4 года назад

Thanks for another great video Keep it up.

@edwinhsingmaster9135 4 года назад

One of your best, thanks.

@bqlongbeach 3 года назад

Scott is the coolest guy I wish I knew. Thanks again for the tips def going to check out the website out.

@Jack.333 4 года назад

Nice Work Thank you

@ElectraFlarefire 4 года назад

Biggest improvement to the fabricated stands I've seen: Put a piece of hard timber between the anvil and the top, so when you clamp it down it fills in the space and stops ringing. Put a shelf at the very bottom of the stand that you can put something heavy there. I've got a little baby anvil, so it's just a 20kg bag of sand, but it works great to keep it low and solid. And if it's still ringing, fill hollow legs and other parts with sand, this also helps add weight.

@rh5971 4 года назад

I just bought a brand new anvil. Great idea on raising the edge of the hammer loop to create a better landing pad for rivets and such!

@CSmothersForge 3 года назад

A tripod stand, with proper thickness filled with stand and bolted anvil with silicone is hard to beat and fairly quiet

@flintrichards945 3 года назад

Very good information really enjoyed this video. Your shop is amazing I think it’s the best I have ever seen.

@lancegreen9699 4 года назад

Man, I just found this channel! I love it!

@BrianDaleNeeley 4 года назад

Yeah! A blacksmithing video (or pretty darn close). I started watching this channel with a blacksmithing video, and subscribed because the (GOOD) knowledge flows in a constant stream (and sometimes a deluge, but I can watch a video a second time if necessary, and maybe even take notes), and is entertaining to boot.

@bcc2a 3 года назад

Have you seen or used a sand box style anvil stand? You fabricate a steel or wood box (kind stump-sized), fill with sand, and set the anvil on the sand. As the sand settles during initial period of use you need to add some more, but it becomes adjustable as you can add or subtract sand as needed.

@TBizzell68 4 года назад

I’ll be adding a lip to my stand, great idea!

@GibClark 4 года назад

👍👍👍👍good ideas, Been meaning to modify my stand

@dandwisnie3494 4 года назад

A toe kick (4”Hx4”D) around the bottom of my anvil stump has made world of difference for me, Thank you so much for the Great videos.

@joshklein7842 4 года назад

How timely, I'm literally building one this week

@kengamble8595 4 года назад

Thanks for sharing and take care. 👍

@scruffy6151 4 года назад

I hope thing's are going good for you.

@leepumphrey6936 4 года назад

My my... you are obviously a very talented guy, (with many skills), but even more importantly to your viewers, the Lord has blessed you with very rare communication skills. This is what makes it a joy to watch your content. I believe you could make a video on watching paint dry and it would be interesting and entertaining! Also, your spirit is so transparent that I would trust you with any of my loved ones -- AND I'VE NEVER MET YOU! Bless you and your family my friend.

@rodneywroten2994 4 года назад

great ideas thanks

@stephenwilliams1364 2 года назад

Thanks so much for some practical insight and wisdom.....I’m just getting started and still have not found/purchased an anvil

@marcerivest6204 4 года назад

Great video, l will apply some of this to my anvil

@MerwinARTist 4 года назад

One thought that came to mind .. think of all those simple devices that are made in such a shop around an anvil .. that never get patented .. just a really cool idea that is added to the pile! Great hammer rack!

@blankroomsoup666 4 года назад

I know nothing about blacksmithing, but I love that radial arm drill!

@Cliffepoos 4 года назад

Very interesting and some great ideas.

@williamgray1263 Год назад

Thanks!

@eatwhatukiii2532 3 года назад

Thank you for doing this comparison. I inherited Dad’s huge anvil and tools but the anvil has no base. I love that you gave the pros and cons of each style. I was already thinking about doing a log base but your video helped me see it’s the right decision. Oh, and the hot metal being applied to the flaming wood was pretty badass medieval. LOL. Thanks again!

@nelsonfernandez7473 3 года назад

Mister what a great video, love your beautiful shop,

@nicholasroberts9627 3 года назад

This is awesome.

@longcaster 4 года назад

A good one Scott.

@nicholasroberts9627 3 года назад

I love how this guy has all the tools.

@WireWeHere 4 года назад

Reminds me of the time our friend told us about her localized sign confusion, "Free range chickens and Free range eggs". Wow, must be a perk to country living. Yes she did stop to ask and was relieved that the farm's sales associate who cracked open her dreams of free poultry was still in grade 2.

@repetemyname842 3 года назад

Love that shop. Damn.

@jeremiahswihart8983 4 года назад

Love your show god bless

@bobbywartman2058 2 года назад

Enjoyed that :)

@lilyanatorreszollman3805 2 года назад

Can't bet the classics ⚒️

@janderson8401 4 года назад

You mentioned that one down side of using a log is that the bug will try to eat it. Wouldn’t this mean that your nearly perfect “stump” under the Hay-Budden will need to be replaced at some point? Or do you treat the logs to make them less appealing as a meal?

@terdfergeson23 4 года назад

J Anderson yes it will need to be replaced but that will probably be by whomever is lucky enough to have that anvil next!

@paulorchard7960 4 года назад

Treat them with oil, bugs hate it!

@aridemedina8770 3 года назад

Hi man! I just loved your anvil stand! Pretty solid! I think too it's as silent as possible a naturally noise anvil to be!... I'm miles away fro you and recently I bought my first anvil and and an old manual forge. Now I have the toughest task: to choose the best stand 4 me. You helped a lot! Thks so much! 👏👏👏 Fro Brazil 🇧🇷 By the way: I'm an 68 yo old schooler... Rediscovering myself...

@abdulelkhatib2674 3 года назад

i have a 4 6x6 anvil base in a square shape and to hold it down i got some chain and wrapped it one time around with chain as small as possible then on 2 sides i put giant turn buckles and then bolted them to the side of the base with the hooks poking up just a little then i put the chain on the hooks and tightened the turn buckles as much as possible the hardware and 6x6 cost about $60

@kalebcrafts4338 4 года назад

I enjoy just listening.

@southronjr1570 4 года назад

My anvil is mounted almost the exact same way as your fisher including clipping off the edge. I even put some square holes and round ones to hold a few of my most used hardy, pritchel tools and punches. I didn't think about the raised edge though, I think I will have to see what I can do about that because I am always having items I lay on the flat offside top, fall on the floor.

@stevesyncox9893 4 года назад

Thanks

@grantniels6706 7 месяцев назад

If this dad gum Chanel had been around when I was young I would be a real man

@tiagopedro1786 3 года назад

Hi there, just wanted to say that Im a huge fan of your work. I am from Portugal, and the problem with that is that there isnt a "close" community of blacksmiths here, and it's extremely hard for me, who just wants to start pounding some steel, to be able to even find an anvil, and all the ones I do find, as expensive as heck. Damn this saddens me a whole lot.

@jdlives8992 4 года назад

I use a plum trunk. It’s pretty.

@TheOldaz1 4 года назад

I used the base part of the fork of an Australian redgum tree upside down as a base for my 160 Sydney made anvil. This gives a lot of mass with a bigger footprint and almost flat along the working side/s. The anvil is bolted in a similar fashion to the last one in your video. Now I need to copy your tool holster.

@hassenfepher 4 года назад

Alex steel is going to need to step his game up!

@JohnnyUmphress 4 года назад

I have been wanting an anvil for years. It would be such a great help here on my farm. But they are really hard to find here in Arkansas. The few I have managed to scare up have been pretty much destroyed and they still want three time what a clean anvil would sell for. I even have an oak stump under my lean-to that I cut down at just the right height for a future anvil.