The Best Datsun Rear End Setup? FutoFab Axles and Stubs!

Подписаться 4,2 тыс.

Просмотров 6 тыс.

50% 1

/ windows_down_
www.tiktok.com/t/ZTd7mXjPK/
www.futofab.com
Full FutoFab axle kit: rb.gy/sal3d3
T3 Mustache Bar: rb.gy/6poya1
T3 Control Arms: rb.gy/w3lc01
RT Diff Mount: technoversions.com/DiffMount....
ST Rear Sway Bar (240Z=rear mount): rb.gy/qlh3t6
BC Coilovers 260z - 280z (year specific): rb.gy/s7bpza
Safety Wire: amzn.to/4bBgyaC
Redline CV-2 Grease: amzn.to/3uCUHiz
Bearing Driver: amzn.to/3SODDy1
Bearing Puller: amzn.to/3ST2GzP
Don't forget M12x1.25 Flange Nut
280Z Bearings (Timken Rock Auto):
www.rockauto.com/?carcode=120...
www.rockauto.com/en/moreinfo....
Removing Datsun Suspension: • Removing ALL 280z Susp...
Apex Review: • Installing the Apex En...
Disclaimer: Windows Down is not responsible for any damage or injury caused by the information contained in this video.
Intro:(00:00)
FutoFab Details:(01:24)
OEM Disassembly:(03:37)
BC Coilovers:(07:34)
FutoFab Stub Axles:(08:10)
STi Diff and Mounting:(15:43)
ST drop mounts:(19:56)
FutoFab CV Axle:(20:46)
T3 Control Arms:(26:19)
Final Touches: (28:09)

Авто/Мото

Опубликовано:

3 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 31

@novakenss Месяц назад

I have a '72 Z and I've got it restored and updated all around, except the suspension. I only have lowering coils and want coil overs and T3 components front and rear. What you have produced here is one of or even the best I've seen for doing all this work. Your mechanical pointers are precise, and your methods show a home shop mechanic can do most everything. Huge thanks for your work doing this video. I can't wait to watch more.

@windows_down_ Месяц назад

Appreciate it! Lots more to do, best of luck with the build

@tetrist8953 4 месяца назад

Awesome! Really nice seeing it slowly come together! Excited for the next video 👍🏻👍🏻

@windows_down_ 4 месяца назад

Thanks man!

@jamesbusk8571 4 месяца назад

love it bro keep going

@donwest5387 6 дней назад

to remove stub-axle nut; use cape chisel

@Thearc 2 месяца назад

Crazy video ! Everything is well explained, straight to the point !! Loved it keep going !

@windows_down_ 2 месяца назад

Appreciate the support

@JustAnotherAsianGuy2 3 месяца назад

looks pretty good

@p7x 3 месяца назад

Great video! Just put my 280 rear end back together and learned a few things.

@windows_down_ 3 месяца назад

Thanks, so many little things on this rear end

@AnthonyCessor 4 месяца назад

Fantastic video and fantastic work. Love how clean the rear end looks now. Also pretty helpful video as I will be doing a full rear end build later this year.

@windows_down_ 4 месяца назад

Thanks man, love how it went together. Can't wait to get it on the road

@kasmiester8 Месяц назад

Idk why I'm watching this. I'm going to go with the invincible super 8.8 kit or the apex 8.8 kit. But was definitely a nice video to watch and learn

@76S30 2 месяца назад

Excellent video, I learned some stuff :-) I have a 76Z with a lot of those parts already. I still have an open diff though. I have T3 coil-overs and I am pretty sure they have a kit that would bolt right in..I wish you were my neighbor lol

@MrDprada01 2 месяца назад

Great video! I’m glad I found your build. Like you, I was hesitant to go with the APEX rear end for my VQ37VHR build. I am using the front subframe and there’s a lot of good features but it seems to missing the mark on some points. I think I will be going this route with the R180! I’m looking forward to seeing your swap!!

@windows_down_ 2 месяца назад

Thanks man, vq37 swap sounds like a blast too! I'm sure the STi diff will be solid

@BlackwaterDSM 19 дней назад

What are the issues with the Apex stuff? I was about to purchase the front and rear “Track Attack” kit, and after seeing the issues he had here, I changed my tune a bit. Possibly gonna go with T3 stuff instead, but they do NOT make a front subframe or any products for an LS swap like I’m doing. 🫤

@p__jay 2 месяца назад

great video! too bad I am not allowed to use most of those parts...

@Cokebadger1 3 месяца назад

what year rear diff from the subaru did you use?

@windows_down_ 3 месяца назад

I went with a diff from a 2017 STi

@ZachSmith-gm4sq 4 месяца назад

Can you use those stub axles for a 5 stud wheel too or is it just 4? Seemed like with the holes on it, you can use it for both

@windows_down_ 4 месяца назад

Yup, they sell it as either 4 or 5 stud. Both are drilled out, but they press in the studs based on what you order. They also have normal length or extended studs

@ZachSmith-gm4sq 4 месяца назад

@@windows_down_ thank you sir, doing this to mine as well! I want to do 5 lug for wheel choice LOL

@windows_down_ 4 месяца назад

Nice! Def a good idea of going bigger wheels too