The Best Way to Get Into T-Shirt Printing, Prestige A4 First look | AA Print Supply

Подписаться 13 тыс.

Просмотров 10 тыс.

50% 1

Check this out, we got our new Prestige A4 #dtf printer in the house. The size is more compact but powerful. Follow Estevan Romero today for the first look at this mighty printer, including a demonstration of the software. While he also shares some knowledge about #film transferring and #heatpress that will help you with your business!
Product mentioned
▷ Prestige A4 DTF Printer - 2link.in/wJkKP
▷ DTF Station Seismo S20 DTF Powder Station - 2link.in/wE9jM
▷ Phoenix Air 16x20 Curing Oven - 2link.in/6NM5Q
For more information, or to speak with a representative, please click the link below.
bit.ly/46uKRNM
Contact us!
Email: info@aaprintsupplyco.com
Call: [CA] 714-576-2900 [PA] 215-634-2235 [TX] 469-694-0888
Website: www.dtgmart.com / www.screenprintsupply.com / www.aaprintsupplyco.com
Caution: When handling DTF Hot Melt Powder, do not ingest or inhale powder or fumes. Harmful if swallowed. Skin irritations may occur. Avoid contact with skin and eyes. If contact with eyes, rinse with large amounts of water. Wear protective clothing, gear, mask and gloves when handling powder. If allergic reaction persists or accidentally ingested, seek medical help immediately."
Video Chapters:
Intro (0:00)
First Inspiration (0:50)
Software set up (1:52)
Why is DTF different (2:44)
Versatility (3:35)
Tips for the film setup (4:23)
Powdering (4:46)
Curing (5:30)
Applying (6:29)
Peeling (7:11)
Result (8:16)
Outro (8:53)

Опубликовано:

7 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 38

@LoneBagels 2 месяца назад

This is the most exciting thing I saw in a very long time!

@AAPrintSupplyCo 2 месяца назад

Direct to film for EVERYONE!

@anew1602 9 месяцев назад

Thank you for going over how to use the equipment. You have been very informative for a newbie!

@AAPrintSupplyCo 9 месяцев назад

Hey there, thank you so much for the kind words! That is our ultimate goal with the channel and it means so much to hear you say that. Be sure to subscribe for more:)

@devotedbrand 10 месяцев назад

Perfect presentation! Might pick one up to run all my neck tags and front chest prints!

@AAPrintSupplyCo 10 месяцев назад

We know you guys are going to be hyped for this next wave of printers coming out!

@DankUrbanBoss 8 месяцев назад

Just subscribed and I’ll be looking forward to getting my A4

@AAPrintSupplyCo 8 месяцев назад

Congratulations! Thanks for joining. Https://www.youtube.com/@dtfstation will have loads of content on your machine as well!

@steviesteve1716 10 месяцев назад

💯💯💯

@AAPrintSupplyCo 10 месяцев назад

Steviesteve is 100

@LifeofSweetNess 4 месяца назад

Hi! Do you guys have a video that show us the correct settings as far as white under base, print mode, etc for the A4?

@AAPrintSupplyCo 4 месяца назад

Hello! I saw DTF Station put something out for this sort of question, here is the link: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6VZinXkHPOk.html

@chrisbrooks1561 3 месяца назад

How do i fix smudging or ghost print. When i print something it looks like it shadows it in certain places.only had for about 2 weeks

@AAPrintSupplyCo 3 месяца назад

Hey there, how is the nozzle check?

@alishabeez 10 месяцев назад

I’m guessing the A4 replaces the A3? There is no more A3 pricing on the website.

@AAPrintSupplyCo 10 месяцев назад

Hello! The A4 is going to be our smallest model available but for 13" wide printing DTF Station has released the R2 which is more than double the print speed of the discontinued A3 model

@jamesa6983 9 месяцев назад

So this printer wont use A4 (8.5x11.75) flim??

@AAPrintSupplyCo 9 месяцев назад

Hello, this is the film we would advise for best results: aaprintsupplyco.com/products/dtf-station-universal-peel-dtf-film-rolls?_pos=1&_sid=b8105c4b2&_ss=r

@Oscar-vg5xe 13 дней назад

Can I make bigger designs than 7 x 11 on a prestige A4?

@AAPrintSupplyCo 10 дней назад

Yes, as far as width you will be capped at 7.87" but length wise, because it's a roll, are not limited in print size. For artwork you need to produce WIDER than 7.87" you can simply rotate 90 degrees in the software

@waldemargonzalez3881 9 месяцев назад

can I use this film for glass and metal?

@AAPrintSupplyCo 9 месяцев назад

Hello, as long as you are able to achieve even contact on the application area with a heat press these direct to film transfers are able to be applied to hard surfaces like the items you mentioned

@larrycowell2685 10 месяцев назад

When y'all coming out with a 13×19 DTF

@AAPrintSupplyCo 10 месяцев назад

Hey there! Here is the current model for those specs: aaprintsupplyco.com/products/prestige-r2-dtf-printer-1?variant=40035213672532 available alone or bundled with either oven or roll to roll shaker combos

@bassamaa9502 9 месяцев назад

How do I know it is hot warm or cold peel?

@AAPrintSupplyCo 9 месяцев назад

Hello, the manufacturer should outline exactly what sort of peel your DTF film should be. Our product listing will detail recommended settings for application, peel, everything. What film are you working with currently?

@bassamaa9502 9 месяцев назад

How is it compared to Uninet?

@AAPrintSupplyCo 9 месяцев назад

Hey there! Last year we did a comparison video showing the process side by side, you can take a look here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-iak8GeT0src.htmlsi=NMhzvTXg5Bjq1n0W for this comparison we ran just printer and heat press to perform all steps

@abdulwasiusalvador4995 8 месяцев назад

Do yiu have a warehouse in Nigeria? How can I get this machine?

@AAPrintSupplyCo 8 месяцев назад

We do not, but DTF Station does offer the Prestige printers and other products in Africa through JG Electronics. You can find their website here: jgelectronics.com/

@hectorcastaneda5555 5 месяцев назад

En rspañol

@AAPrintSupplyCo 5 месяцев назад

es una gran idea

@fountainsquareusaoriginala7715 9 месяцев назад

If the A4 works as poorly as the A3 they have replaced my Prestige A3 4 times - 5 total printers that have not performed as promised - they obviously have an issue with the A3, I would be suspicious of the A4 being a dressed up fix for the A3 - Their customer service is poor and slow - If you have a business their slow response times are a real problem as they seem to think that all you have to do is wait for them to get back to you and have no idea of production schedules. their tech support guys always seem to be overloaded must be due to all the issues

@AAPrintSupplyCo 9 месяцев назад

We appreciate your honest feedback. While it is our goal to stand behind the equipment we carry we can see how we have not met your expectations in this instance and for that we apologize. We would love the chance to connect with you directly to see what can be done to turn this experience around. Here is the link to connect with management: aaprintsupplyco.com/pages/contact-us

@JasonT-xo2tg 6 месяцев назад

I agree with you on the piss poor customer service. Have the A-4 less than 6 months and have problems. Takes days for a response. Call and talk to someone but get nowhere. Wish i could return it and get my money back. Do not buy this piece of garbage unless you like to pay to get pissed off

@chrisbrooks1561 3 месяца назад

Had my for 2 weeks now and are getting ghost prints. Any advice you give me would help@@JasonT-xo2tg