Тёмный

THE BEST WAY TO LOWER YOUR BMW M3 or M4 ON A BUDGET! (DIY) 

Jake Spence
Подписаться 73 тыс.
Просмотров 59 тыс.
50% 1

I couldn't stand the 4x4 look of the F80 M3 in stock form, so I had to lower it right away. This was the first modification I made to the car and I'm so glad I did. All of the parts and tools you'll need to do this to your BMW F80 M3 or F82 M4 are linked below!
M3 Emmanuele Design Lowering Springs: bit.ly/2yr2pyJ
M4 Emmanuele Design Lowering Springs: bit.ly/2ytzR7T
My review of EMD springs: bmwf80.com/the-best-lowering-...
My installation guide: bmwf80.com/how-to-install-low...
Rosenbauer's Garage: / 855066891505215
REQUIRED TOOLS:
- 18mm BMW strut nut socket: amzn.to/2wW9ZRv
- 17mm BMW wheel-saver socket: amzn.to/2Jc6KId
- Small 10mm angled wrench: amzn.to/3aDq4dt
- Trim removal tool set: amzn.to/2Ucm0uL
- 1/2" torque wrench (10-150 ft/lbs): amzn.to/3do7zeG
- 1/2" cordless impact wrench: amzn.to/2xUZaiD
- 1/2" ratchet wrench: amzn.to/2X14sDJ
- 10-24mm socket set (*21mm, 16mm, 10mm): amzn.to/2Ut8bXS
- 8-22mm wrench set (*21mm, 9mm): amzn.to/3aeU7Ig
- T10-T50 star bit/torx wrench set (*T40): amzn.to/39xESZD
- 6-12mm nut driver set (*10mm): amzn.to/3bJBTPi
- Screwdriver set: amzn.to/2vMFxsw
- Low-profile floor jack: amzn.to/39EeQEa
- Jack stands: amzn.to/2y4lVRp
- BMW jack pad adapters: amzn.to/2QGdFgT
-------
📷 Instagram: / jakespence
🏁 My BMW merchandise: bimmerstreet.com
🌟 Become a Patron: / jake_spence
💰 Donate to the channel: bit.ly/2HhSDAZ
📬 Send me something!
Jake Spence
W3178 Van Roy Rd #135
Appleton, WI 54915
-------
😍 MUST HAVE BMW ACCESSORIES
➡️ My Favorites: amzn.to/2J6RJY4
⛽ BMW OIL CHANGES I SWEAR BY
- Motul X-cess 5W-40 Oil (5L): amzn.to/2HKTbOv
- Motul X-cess 5W-40 Oil (1L) x2: amzn.to/2HbGpqZ
- Mann Oil Filter: amzn.to/2HLiPT5
- Magnetic Drain Plug: amzn.to/2EYwYsV
🔧 TOOLS I LOVE
- Dragy GPS Track Timer: amzn.to/2J4DILx
- BMW Magnetic Spark Plug Socket: amzn.to/2VQGaw6
- MaxJax Home Garage Lift: bit.ly/2WHGZZm
- QuickJack Floor Lift: bit.ly/3avEqfT
📸 MY EQUIPMENT
- Vlogging Camera: amzn.to/2H7Ggax
- Wide Angle Lens: amzn.to/2Uo7pyn
- Canon 50mm Lens: amzn.to/2YVFdkS
- RODE Microphone: amzn.to/2ViStSq
- Fluid Head Tripod: amzn.to/2IPWcix
- Camera Stabilizer: amzn.to/2D5N5Hg
- LED Camera Light: amzn.to/2H6SgJp
- DSLR Suction Mount: amzn.to/2Kkwrd3
- GoPro HERO7 BLACK: amzn.to/2Job7RE
- GoPro Suction Mount: amzn.to/2vLdq9m
- DJI Mavic Pro Drone: amzn.to/2H76iur
- Editing PC (it's a POWERHOUSE!): amzn.to/2V29ds8
This description contains affiliate links. If you click any of the links above to purchase a product, I will earn a small commission at no extra cost to you. Win-win!

Авто/Мото

Опубликовано:

 

26 июн 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 202   
@jake_spence
@jake_spence 4 года назад
Can I get a 'like' for the epic drift at 20:13?
@Kelpk1
@Kelpk1 4 года назад
Jake Spence definitely take a like for that!
@JerainJezza
@JerainJezza 4 года назад
My way of daily driving :D
@MADLITS1K
@MADLITS1K 4 года назад
“Epic” lol all u did was power slide while turning do a actual street drifting video
@javi_335i
@javi_335i 3 года назад
Nice drift action🔥💪🏽
@gregbaker4524
@gregbaker4524 3 года назад
Love all your videos man so glad you’re getting to experience the new M3!!!
@SergNoberg
@SergNoberg 2 года назад
I never comment on videos but this was Such a way easier process to add the springs than some of the other videos I’ve watched, just bought my lowering springs for my M4, thanks for the video
@oscararreola6855
@oscararreola6855 4 года назад
You’re doing a great job bro👍🏻 Been watching your videos for a while now.. a lot of info here keep doing what ur doing man
@jake_spence
@jake_spence 4 года назад
Thank you so much 👍 I really appreciate the support.
@borisstupar4208
@borisstupar4208 4 года назад
Dope! Looking forward to the entire build
@jake_spence
@jake_spence 4 года назад
You and me both!
@isaiahchandra6396
@isaiahchandra6396 4 года назад
Looks good man! Love the channel. Hopefully gonna be adding an f80 to my vw/audi stable in the next few years
@vivid_racing
@vivid_racing 4 года назад
Nice video! Definitely made a huge difference
@jake_spence
@jake_spence 4 года назад
Agreed, thanks! I couldn’t be happier.
@terrancecollins2696
@terrancecollins2696 Год назад
This is an insanely easy job for what you're accomplishing ... Cannot wait to do this myself I can't wait lol
@robscott1620
@robscott1620 4 года назад
Smashed it we need more videos alway look forward to watching them. 🤟🤟
@jake_spence
@jake_spence 4 года назад
Working on it! Thanks for the support man.
@mikebellows754
@mikebellows754 4 года назад
Nice car and good info on the springs. I own a ‘18 F80 comp manual in the same color as yours. Like your videos!
@2052lt
@2052lt 4 года назад
Such a great car Jake ! I'm happy for you. 1st thing to do before moding, crank hub fix !
@jake_spence
@jake_spence 4 года назад
Thanks! I don't plan on doing the crank hub fix immediately (fingers crossed LOL), but it'll happen at some point!
@jeengyim3072
@jeengyim3072 Год назад
This is the best one I’ve seen and a lot easier and faster
@InitialRacing
@InitialRacing 4 года назад
So glad you made this a DIY video. Missed the videos for a bit. I sold the 135i But still love my daily dose of BMW. Def need some more #FastandFurious videos though. Sending support from Florida!
@jake_spence
@jake_spence 4 года назад
Right on! I'm hoping to drop some of the racing videos that you guys seem to love soon!
@etelking
@etelking 4 года назад
nice job man looks good
@jake_spence
@jake_spence 4 года назад
Thanks 👍
@MrNicoe36cabrio
@MrNicoe36cabrio 4 года назад
Very nice upgrade Jake! Stay safe! Dutch lockdown( till 28th of April) regards, Nico.
@jake_spence
@jake_spence 4 года назад
Thanks! You too! We're on lockdown til end of April as well. We'll see if it gets extended.
@eric4698
@eric4698 4 года назад
I'M SOLD....... getting a set for my 2015 F82... thank you for the in-depth review on the install...subscribed
@jake_spence
@jake_spence 4 года назад
Glad I could help! They're awesome springs and I still love them. You'll be happy.
@eric4698
@eric4698 4 года назад
@@jake_spence zi was mainly worried about the 1.3in front drop but I have the F82 and since it drops .5in more in the back I think that will remove some of the aggressive rake the F80 has and lever the front out slightly. Will see.....
@scotthainey8682
@scotthainey8682 4 года назад
The car looks amazing I've nerve liked lowering springs on shock shocks but these seem pretty legit and the drift 👏👏
@jake_spence
@jake_spence 4 года назад
Thanks! 👍 I'm very happy with them. Thanks for watching.
@scotthainey8682
@scotthainey8682 4 года назад
@@jake_spence no problem man love your videos keep them coming we need your videos in this time right now being stuck in the house
@DrMelInvests
@DrMelInvests 4 года назад
Awesome vid and definitely Subscribed! I wonder if those springs work on a F02 with rear air springs?
@TuanNguyen-zm3gq
@TuanNguyen-zm3gq 4 года назад
Looking good!!!!!
@MrKarlfebel
@MrKarlfebel 4 года назад
Looks perfect
@jake_spence
@jake_spence 4 года назад
Agreed, thanks!
@famousmidnight
@famousmidnight 4 года назад
Had no idea you bought an m3. Congrats man beautiful car.. Personally would have used the cups in the rear but wtvr
@jake_spence
@jake_spence 4 года назад
Thanks! 👍 I can always add the spacers if I want.
@micraw714
@micraw714 4 года назад
Nice! I'm throwing some st coils on my e92 m3 tomorrow 😁 I was actually about to order that same torque wrench you're using in the description too, that's pretty cool.
@jake_spence
@jake_spence 4 года назад
Nice 👍 Let me know what you think of those ST coilovers! I've found that Tekton makes great, affordable tools. I am continuing to buy more of their stuff.
@micraw714
@micraw714 4 года назад
@@jake_spence Will do! And yes I've seen good reviews on them so I'm anxious to give it a shot 😁
@LuchoCampusano
@LuchoCampusano 3 года назад
thanks Jake !
@Espence2323
@Espence2323 4 года назад
You sounded straight Texan when you said “I feel kinda bad for” at 20:36
@jake_spence
@jake_spence 4 года назад
YEEEEEEHAWWWWWW!
@Valadcm500
@Valadcm500 4 года назад
You got a new subscriber bro I thought I was sub been watching for months lol
@slowgls
@slowgls 4 года назад
Hell yeah, looks so good. Btw, good job holding on to her. Was worried for a second. Lol.
@jake_spence
@jake_spence 4 года назад
Oh she's not going anywhere! I'm keeping this one for a while.
@slowgls
@slowgls 4 года назад
@@jake_spence I think you missed what I was saying . Was talking g about the slid at the end of the video. Good job not loosing it. Lol.
@user-ty6of6gk9f
@user-ty6of6gk9f 4 года назад
What year is ur m3? You really do ur homework...u have picture of ur m3 before n after fixing the new springs..excellent job.
@Ghostmap
@Ghostmap 4 года назад
Look Great 👍🏼!!!
@kevinryan2556
@kevinryan2556 4 года назад
Excellent video! Definitely thinking about trying this on my F80. Do you still recommend this product at this point? Thank you.
@mercstealthdk
@mercstealthdk 4 года назад
Every time I watch your videos makes me want to get my childhood dream car, v10 m5. I just need to sell my VW and finish my winter beater to do it.
@jake_spence
@jake_spence 4 года назад
You can do it! I love the E60 M5, sounds so great.
@TheBigDubovsky
@TheBigDubovsky 3 года назад
Thanks for the video. Just wondering, did you replace any of the bolts and nuts with new ones? Also did your shop do indexing on some of the bushings?
@AtilioEscobar
@AtilioEscobar 4 года назад
I'm not really a car mod guy, but fascinated with the process. My question is, when u put lowering springs on, does it affect the tire wear? As in, not wearing evenly? Always wondered that.
@christianperles9780
@christianperles9780 4 года назад
Nice video! You definitely made the springs look easier then when I did it with jacks in a drive way with a buddy. What plans do you have for the f80 and what’s your thoughts on doing the crank hub fix for these cars
@jake_spence
@jake_spence 4 года назад
I'd like to do FBO and some tasteful appearance modifications. Crank hub eventually. I think it's a good peace of mind.
@drifter2090
@drifter2090 4 года назад
Spacers time!
@21void5
@21void5 4 года назад
Real nice stance. I’m wondering what would it looks like with the spacer on. I always like the rear is a little bit higher than the front that just my own opinion. If you can slap some wheel spacers on. Oh man. It’s going to look really clean
@kevinryan2556
@kevinryan2556 2 года назад
Great video. Question: Is there a torque recommendation for tightening the front strut rod nut? Thank you
@user-el2zj3pw5r
@user-el2zj3pw5r 4 года назад
Drop is perfect
@jake_spence
@jake_spence 4 года назад
Agreed!
@jeffreywornjuyskey3545
@jeffreywornjuyskey3545 4 года назад
legend
@jake_spence
@jake_spence 4 года назад
🙏
@FL5ghost
@FL5ghost 4 года назад
I did the H&R Super sport springs! I love my CS
@jake_spence
@jake_spence 4 года назад
Nice! I read some not-so-great things about H&R SS. How do you like them?
@FL5ghost
@FL5ghost 4 года назад
Jake Spence their honestly not that bad I haven’t had any problems, everyone says there bouncy they aren’t.
@camsprouse317
@camsprouse317 3 месяца назад
Did you guys have any issues reconnecting the wiring harness for the suspension? Mine will not go on no matter how hard I push
@JerainJezza
@JerainJezza 4 года назад
Damn that looked easy! That front way of putting springs on is smart, will it work on an E92? The height looks amazingly good and spot on, which is not so easy with just lowering springs.
@jake_spence
@jake_spence 4 года назад
It was! And I'm not too sure. I've never seen it done that way, or tried it myself on an E92. I feel like I would've come across that method before, but you can try it and see what happens!
@Fuzion180
@Fuzion180 4 года назад
I really want an M3/M4!
@jake_spence
@jake_spence 4 года назад
Get one!
@oOFF33Oo
@oOFF33Oo Год назад
Thank you for this amazing video. I have a question, I have a 540i G30 with option 223 adaptive suspension and I would like to know if I can also mount these short springs because my suspension system is a little different from your... Is there no influence on the control of the suspension with these short springs or premature wear of the system? Has your suspension been performing well since installing the short springs?
@davis7323
@davis7323 3 года назад
Amazing video any noob can do this! Question though, my f83, m4 convertible is lowered on HR springs 1.5f/1.1r, I want to raise the front some. I understand that people can add spring pads to raise the rear, what can be done for the front? I'm in NY not the best roads and bought the car like this, wanted to raise it up slightly. Thanks!
@VinceFung
@VinceFung 4 года назад
I'm tempted to go Emmanuele but I have a V-style lip and feel that maybe eibach would be safer but the drop is nearly nothing in the rear with eibachs :(
@oside_m5
@oside_m5 4 года назад
I wish they had these for my F10 M5. I put H&R spring in because I wanted to retain my factory EDC and it seems ok on the H&Rs and not bouncy. F10 M5 is coilover on the rear like the front though, not like you M4 with a spring separate from the strut. not sure if that makes a diff.
@The52blocks
@The52blocks 3 года назад
Jake - you have the air impact tool to help you take off the front strut mount bolt, what would you suggest if not using an air tool? I see some people say you can use an 18mm 12 pin open socket - is that true? And any other way other than me buying a new socket set?
@harrisonjoa
@harrisonjoa 3 года назад
I wish you went through the suspension modes on the springs. Do they still work?
@krispuglisi8482
@krispuglisi8482 2 года назад
Just ordered these to have installed. Did you end up using the spacers?
@fpschorsch
@fpschorsch 4 года назад
Jake do you still like the springs after months on them? Im considering doing the same and about to buy them. I thi k I will use them with the rear spacers though.. Let me know if you've had any issues. Thanks 👍
@bkracoski3283
@bkracoski3283 4 года назад
Like before watching the video :)
@jake_spence
@jake_spence 4 года назад
You the real MVP!
@greddy376
@greddy376 3 года назад
Hey Jake do you have or remember the camber specs of the car after lowering it? Thanks you
@AbletonLiveTechs
@AbletonLiveTechs 2 года назад
hey i have a 2018 f80 m3 competition wheels. I put 15 mm in front and 20mm spacers in back. Love how wide the back is but i do not like the gap in the front. Can I go with just rear wheel spacers and leave fronts stock?
@Griffin283
@Griffin283 4 года назад
Now you just need spacers to get rid of the hover craft look.. Two best mods to the F8X chassis.
@Jamstig83
@Jamstig83 4 года назад
Did you ever install the rear pucks afterwards?
@JuanReyes-qr9kp
@JuanReyes-qr9kp 4 года назад
BMW power 🚘🚘😎
@stevenakachian7221
@stevenakachian7221 3 года назад
Did you consider the m performance springs? Why didn't you go with factory?
@BTSyaya
@BTSyaya 3 года назад
Can I get a 1 year update lol thinking about lowering springs from my f82 and wondering how these are doing
@silviondorere3185
@silviondorere3185 4 года назад
That’s interesting. I installed ED on my 2018 Golf R and HATED them. So bouncy, wish I’d gotten H&R instead. I hope you have a better experience then I did.
@jake_spence
@jake_spence 4 года назад
Interesting! Thanks for chiming in. What kind of reputation did they have in the VW world? I have no other experience with them.
@racheltitus9257
@racheltitus9257 4 года назад
1:17 Tons of research didn't even click the Blake's Garage video with a full install and driving review lol
@krispuglisi8482
@krispuglisi8482 2 года назад
Are these EDC compatible what does it come with emulators? I know some of these can throw an alert every time you start the car? Otherwise they look awesome
@Aqthekid
@Aqthekid 3 года назад
With those springs the biggest tire you can go in the back with is 285 correct ?
@carlitosway7974
@carlitosway7974 4 года назад
Looks good, but need some spacers.
@Denacethemennis
@Denacethemennis 4 года назад
Dope video! Do you think my tire will rub the fender if I have competition wheels with these springs installed?
@jake_spence
@jake_spence 4 года назад
No, they won't.
@Kryptonman27
@Kryptonman27 4 года назад
What about when it snows? Will you have enough clearance?
@johncastillo7430
@johncastillo7430 4 года назад
Love the car man! I have a 1er right now that’s what lead me to your channel but later down the road I want to get an f80 competition how do you think these springs would do on that? I don’t know for a fact if the spring rate is different ZCP or not.
@jake_spence
@jake_spence 4 года назад
Thank you! I'm glad you found the channel. I have some 1er videos coming soon. I'm not sure about the F80 ZCP springs either, but I would assume they're close to the same, if not identical. I wouldn't hesitate using these springs on a Competition package car.
@johncastillo7430
@johncastillo7430 4 года назад
Jake Spence awesome! I’m excited to see the progression of the M3, great channel and great content!
@brandonfinleyx
@brandonfinleyx Год назад
Hi! I just did my springs on my F22, and it sounds like the struts are popping when I turn at no/low speeds. I use a counterhold/ratchet off of the car and tightened the strut nut. Is it possibly that the top nut isnt tight enough? If so, I should be able to hit it with an impact with the car on the ground right? Any help is appreciated!
@grahamwilliams2494
@grahamwilliams2494 4 года назад
"Today we're gonna cut the springs on my m3" xD
@hanksun267
@hanksun267 4 года назад
how do you film the drive bys?
@WhatsyourForte
@WhatsyourForte 4 года назад
Hey man. I have been looking at these springs for my M4. I have the adaptive suspension. Which suspension do you have?
@jake_spence
@jake_spence 4 года назад
I also have the adaptive suspension. They work great, I love em!
@gregbaker4524
@gregbaker4524 3 года назад
I wonder if you can remove the spring from the front like that on a e60 🤔
@F80oscar
@F80oscar 3 года назад
Do you think a 275/30/20 fit instead of a 265 ?
@sterlcom2
@sterlcom2 4 года назад
So what are your plans for winter driving? are you going to get snow tires?
@jake_spence
@jake_spence 4 года назад
The car actually came with a second set of wheels with brand new snow tires. I’ll either use this car or get another cheaper winter car.
@TickleMePinkGaming
@TickleMePinkGaming 4 года назад
would these fit on a m4 zcp with spacers?
@jake_spence
@jake_spence 4 года назад
Yes they will!
@hlfuture
@hlfuture 2 года назад
Will these springs work on a 430i 2018 ?
@josephornelas8546
@josephornelas8546 2 года назад
Are you still rocking theses springs? still feel the same way about them?
@ronaldo19832
@ronaldo19832 4 года назад
Man I wish I had known about these before... all the solution I found were a bit to expensive for my m4
@endlessaddictions1150
@endlessaddictions1150 Год назад
Did you not have camber issues ?
@jonathanlopez1114
@jonathanlopez1114 4 года назад
can these work for a 2017 bmw 430i
@209Paul2011
@209Paul2011 4 года назад
Need spacers to bump the wheels out a bit, color match side reflectors, and gloss black kidney grille, then you'll be done.
@jake_spence
@jake_spence 4 года назад
I have all of the above, just need to install :)
@unrealeck
@unrealeck 4 года назад
If I had some money, I'd spend it on AC Schnitzer springs.
@xUSxGHOST2049x
@xUSxGHOST2049x 4 года назад
I wonder if you can remove the spring from the front like that on a e60 🤔
@jake_spence
@jake_spence 4 года назад
I'm not too sure, I'm not familiar with E60s. But it worked great on the F80!
@dmitriypopkov7510
@dmitriypopkov7510 3 года назад
No spring compressor needed??
@Dame102988
@Dame102988 4 года назад
I had their same on my M4 but now I have KWV3s
@jake_spence
@jake_spence 4 года назад
Why did you switch? Did you not like the EMD springs?
@sandro2304
@sandro2304 4 года назад
Hi Jake, I assume you will be installing studs on the wheels of this car too, right? Also, will you put spacers on this car? And, what year is the F80?
@jake_spence
@jake_spence 4 года назад
Yes, that's the plan! It's a 2015.
@sandro2304
@sandro2304 4 года назад
@@jake_spence Is it worth putting spacers on an M2? (My car is bone stock other than having ceramic coating)
@TheBigboySid
@TheBigboySid 4 года назад
@@sandro2304 ceramic coating the spacers first.
@changsivilay8015
@changsivilay8015 4 года назад
What size spacers are you putting in the front and back? And what brand did you go with?
@jason82180
@jason82180 3 года назад
Realistically, how long would you say this job is.
@BMWHOBO
@BMWHOBO 4 года назад
When will the hoodie you are wearing be available for purchase?
@jake_spence
@jake_spence 4 года назад
I can definitely add this to BimmerStreet! Keep your eye out in future videos, I'll mention when it's available.
@ScienceBitch123
@ScienceBitch123 2 года назад
Lol at the saran wrap. That ain't gonna do crap to prevent scratches if you drop a tool
@mmlehman11
@mmlehman11 3 года назад
Did you have any sounds in your front end after installing these? I did the same exact thing here with the same springs and watched this video and now I have a clunking sound in my right front end. Can you ask your mechanic what this might be since I follow this to a T.
@nonstopper
@nonstopper 2 года назад
Did you ever fix. I hear you have to tighten sway bar end links while the suspension is under load
@Gapdd
@Gapdd 4 года назад
Why didn’t you go with MSS, are they not available? Heard they were the way to go!
@jake_spence
@jake_spence 4 года назад
Macht Schnell?
@Gapdd
@Gapdd 4 года назад
Jake Spence ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8lT3Ak31zrw.html
@THECANDYISGONE
@THECANDYISGONE 4 года назад
Price with springs + install? Thanks. :)
@jake_spence
@jake_spence 4 года назад
$300-350 depending on if you have an M3 or M4. Install shouldn't be more than a couple hundred bucks. M3: bit.ly/2yr2pyJ M4: bit.ly/2ytzR7T
@lennartverleye8700
@lennartverleye8700 4 года назад
How do you know how much torque each nut and bolt needs?
@jake_spence
@jake_spence 4 года назад
I looked it up online. You can find all of the torque specs in my write-up linked in the description.
@rileymax8175
@rileymax8175 4 года назад
Do these springs not work with the adaptive suspension?
@jake_spence
@jake_spence 4 года назад
They definitely work with adaptive suspension, that’s what I have. They also work with the standard suspension.
@BrapcityH-D
@BrapcityH-D 3 года назад
I like how he is like we we we and all he did was hold the camera
@MotaDrives
@MotaDrives 4 года назад
🤙🏾
@jake_spence
@jake_spence 4 года назад
😃
@MrScholarly
@MrScholarly 4 года назад
I wish they made them for the 2015 M235i ☹️
@jake_spence
@jake_spence 4 года назад
Me too! I'd recommend the H&R Sport springs for your F22: bit.ly/2UMcwXn
@1Heyfred
@1Heyfred 4 года назад
Now check your bump steer. Looks over performance.
@franklyn335i
@franklyn335i 4 года назад
Hey, will these fit the f30 335 xdrive
@jake_spence
@jake_spence 4 года назад
No, they won't. You need these: bit.ly/3bXi338 or these: bit.ly/2RfYefs
@Kryptonman27
@Kryptonman27 4 года назад
i bought these springs and my local shop said that the front will take longer because of the edc is this true?
@jake_spence
@jake_spence 4 года назад
It shouldn't take any longer. Sounds like they might be yanking your chain a little bit.
@Kryptonman27
@Kryptonman27 4 года назад
@@jake_spence ok cool, thanks for the reply
@gurbaxsingh1876
@gurbaxsingh1876 4 года назад
Where the 135i racing videos at?
@jake_spence
@jake_spence 4 года назад
They're coming! Waiting on warmer weather at this point.
@Fix_It_Again_Tony
@Fix_It_Again_Tony 4 года назад
I think the stability improvement you feel ("floaty" feeling gone) is a result of improved aerodynamics by lowering the car and particularly the front. A low front helps reduce the airflow under the car than can create turbulence which reduces the air's speed and creates lift. This is what an air dam does, but obviously the closer the air dam is to the road the better it works. You didn't lower the rear as much so just maybe (and I mean maybe) you are getting more of the same effect that occurs in a diffuser on a race car. I suspect it is more of a reduction in lift from preventing underflow than a increase in negative lift generated by the rake of the car. It would be nice if someone who studied vehicle aerodynamics would chime in.
@jake_spence
@jake_spence 4 года назад
I agree with your thought process. But I didn't want to say anything concrete because I'm no engineer or aerodynamics expert. But I'm glad to see we're on the same page lol.
@Fix_It_Again_Tony
@Fix_It_Again_Tony 4 года назад
@@jake_spence For sure. Whole careers are dedicated to this kind of thing. There is a three parts series on F1 aerodynamics that is pretty interesting: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZFEzMKYjShc.html
@devildog0331
@devildog0331 4 года назад
M Performance HAS kit is the way to go on F80, sorry.
@jake_spence
@jake_spence 4 года назад
Agreed, this is the way to go, but it is quite a bit more expensive.
@WhatTheFlipOfficial
@WhatTheFlipOfficial 4 года назад
Might as well get coilovers at that price, any type of springs, yes including BMWs own lowering spring, only setup will add extra wear to your struts.
Далее
AGGRESSIVE 20" WHEELS for the M3 + HUGE BUILD UPDATE!
11:16
Задержали в аэропорту
00:56
Просмотров 100 тыс.
Thank you 3M❤️
00:14
Просмотров 700 тыс.
24 часа Я МИСТЕР БИСТ челлендж
1:12:42
Recycled Car Tyres Get a Second Life! ♻️
00:58
Просмотров 358 тыс.
I bought a BMW F80 M3 for my birthday!
17:03
Просмотров 45 тыс.
The Best Coilovers For The F80 M3
20:39
Просмотров 10 тыс.
Eibach Pro Kit Lowering Springs / BMW F82 M4
9:40
Просмотров 7 тыс.
BAGGING My G80 M3 And Here's Why..
23:25
Просмотров 5 тыс.
REBUILDING WRECKED BMW M3 THAT THE INSURANCE COULDN'T
40:05
Vlog 10 - BMW M4 gets H&R Lowering Springs!
22:38
Просмотров 4,6 тыс.
Самый дорогой соболь 4х4 V8
0:59
Просмотров 734 тыс.
2400$ zavatskoy traktor
0:43
Просмотров 629 тыс.
perbaikan busi loncat dudukan dol #shorts
0:53
Просмотров 8 млн
Топ 5 ЛУЧШИХ Авто за 500 тыс.
0:58
Magirus-Deutz 232 АНОНС
0:58
Просмотров 1,1 млн