The Charlie Show /// Episode 299 /// Fusion SE Setup

Подписаться 16 тыс.

Просмотров 16 тыс.

50% 1

Install walk through including setup, Automatic Motor Pairing, Calibration, and a run down of what all the settings do for the Fusion SE.
This is an install is into a Element RC Senduro, but applies to just about any other RC Crawler out there.
Link to the Fusion SE:www.hobbywingdirect.com/produ...
Link to the Fusion SE Manual:cdn.shopify.com/s/files/1/010...
RC Stuff Podcast: anchor.fm/hobbywing
More info from The Charlie Show about the Fusion SE:
• The Charlie Show /// E...
HOBBYWING Official RU-vid
+++++ Cars & Trucks +++++
Xerun series (Professional grade)
Ezrun series (RTR / MAX upgrade)
QuicRun (starters)
+++++ Helicopters & Airplanes +++++
Platinum Series
Flyfun Series
Skywalker Series
+++++ DRONE +++++
XRotor Pro Series (Pro.Filming /industrial, Gov. research)
XRotor FPV "M" Series (FPV Racing)
XRotor Series
+++++ Marine +++++
SEAKING Pro Series (Speed racing)
SEAKING Series (Marine)
Our mission: Help create memorable moments worldwide.
HOBBYWING Factory: www.Hobbywing.com
HOBBYWING North America: www.HobbywingDirect.com
Hobbywing
Twitter.com/Hobbywing_
Copyright & Trademark
HOBBYWING is a registered trademark of Hobbywing technology.
#HOBBYWING #NerdTheNewCool #HDUB

Хобби

Опубликовано:

1 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 30

@runnerbaba Год назад

Fusion Mini for the Trx-4m would be awesome!

@413RCs Месяц назад

Love the videos thanknyou for the information! Definitely helpful and very informal! Thank you!!🤙

@rccrazy7495 2 месяца назад

Awesome 👌 You hit the nail on the perverbial head...lol the program card the hobbyshop sold me doesnt ha e the right sticker for my fusion 2&1 SE.. lol.. Thanks for the help !!

@mikebird8290 Год назад

1to turn 2 to burn. Thanks for sharing this great value fusion se. I'm waiting on DELIVERY of the 1800kv 🇬🇧

@paulnorton7444 3 месяца назад

👍🎉

@NCMOUNTAINSbackyardRC Год назад

Just dropped a vid on my SE. it’s awesome ..

@geraldpenaredondo9783 5 месяцев назад

you need to do motor pairing and throttle calibration at the same time ? hope you notice me . thanks

@adamrodgers2377 Год назад

Just found this video, I love my HobbyWing Fusion Se and I also have a 1080 ESC and a HobbyWing 5 Slot Brushed Motor for another Crawler. Where Im going with this is I had a Dynamite Programming Card that I used to program my Rig and my Daughters, I just had to follow the directions and settings in the manual. Yes I would rather have a HobbyWing Programer but since they recently stopped including them I just used what I had. The Dynamite Programming Card looks just like the HobbyWing Programer except the instruction sticker on it is different so if you have one and want to use it make sure you follow the settings in the manual.

@gebiscrust284 7 месяцев назад

Anyone have issues with cogging. When I run mine with no load(holding in the air) it seems to start cogging. And yes I’ve done the motor pairing…🤷‍♂️

@greglado9904 3 месяца назад

Me too. Just installed and cogging even with wheels down. I did not yet set the cw direction. Other than that, everything else according to the manual.

@jameshankssr466 Год назад

My se 1800 kv will be here monday ordered from hobbywing direct!

@rcgarageph7228 3 месяца назад

Hello boss! I would like to know if i can run a 7.2 battery nimh on a fusion se 1800kv? Really curious about it, but if it doesn't work, what battery do i need in order to run it

@BananaBabys Год назад

Is it true that the pro had better low speed torque than the SE?

@randytheheatguy5277 Год назад

Maybe a Fusion 2in1 in a 380 size for the UTB 18 ???

@erascalemodels 3 месяца назад

I got a program card with blue sticker on it, can I still input the same parameters as you did with red sticker?

@hadoukennumber13 Год назад

Just installed one of these in my Element Enduro. After hiking uphill, driving the truck for about 20mins the power cut out completely. And no it wasn't the battery cutoff because the steering wouldn't work either. Motor seemed very hot to touch although I didn't notice the overheat protection flashing on the power LED. Anyway that's the bare bones of what happened...did I miss something on the install/programming? My last two ESCs are/were 1080s so I am used to programming the values in. Any advice would be welcome. Up until that point the new setup seemed mint. Much better than the previous brushed motor I was running before. Cheers!

@JapSantos-dr5rz 8 месяцев назад

is it working fine now? planning to get one that's why i need your guys feedback about it if its great or not. thanks

@hadoukennumber13 8 месяцев назад

Hello, I can't say for sure as I sent it back to Hobbywing for testing and I should be getting it back soon. This process has taken almost two months but that's not entirely their fault. Also, some of my misgivings can be attributed to a faulty FS GT3-C that took a while to narrow down that that was indeed the cause of some problems and not the Fusion. In a nutshell my main concern is that it got hot when running and when I asked Hobbywing about this (after they tested mine) they said 'that's normal'. So, sorry my answers isn't so straightforward but if you are buying in the US their customer service is excellent in case something does go wrong. I was dealing with their Chinese HQ and that worked out fine...eventually.@@JapSantos-dr5rz

@Friskee62 9 месяцев назад

I just did that and my motor pairing operation was much quicker then what yours was...

@TRKISH324 Год назад

So, my Fusion SE has worked well for 4 1/2 months, but has now gotten a phanton throttle issue. Tried to rebind multiple RX. recalibrate, motor pairing, but all that has done nothing but change the phantom from reverse to forward. At 5 months since purchase date, do I go through the dealer or from HW?

@HOBBYWINGOfficial Год назад

Please check your emails. We'v replied. A common topic that has an easy fix. "Servo Test" first then go from there.

@philippjager3942 Год назад

Fusion mini please

@kelrobins7476 Год назад

So will the 1080 brushed esc program box work with QRun brushless ESC like the 10bl120 sensored THANKS

@HOBBYWINGOfficial Год назад

Any of the LED Box's, internals, are the same. They just have different 'stickers' or labels. So yes, any QR ESC should work with any LED Card, but you have to use the ESC's instruction manual to reference the "Setting Chart" so you know what the numbers are.

@kelrobins7476 Год назад

@@HOBBYWINGOfficialmuch appreciated 👍 thanks for reply

@beng.6417 Год назад

will this fit a Vanquish VS4-10 without any modifications or trimming of the trans housing?

@HOBBYWINGOfficial Год назад

Hello. It fits the Phoenix RTR, that should be the same basic truck/trans, but would be worth checking with Vanquish directly.

@austinrumrill107 Год назад

Can i use my hobbywing lcd program box with this

@HOBBYWINGOfficial Год назад

The Quicrun series of ESCs , including the Fusion SE and Fusion Pro, do "not" work with the LCD Program Box, and "only" work with the LED program Card.

@austinrumrill107 Год назад

@@HOBBYWINGOfficial ok thank you