No video :(

The cost of Adding Detail - Time!!! Glazing Bars, Window boards and Panel rebates

Подписаться 59 тыс.

Просмотров 28 тыс.

50% 1

Adding Window boards, glazing bars and Panel grooves to the frame and progressing towards glueing it together.
Adhesive for sale on my website Price includes postage to UK mainland only - bradshawjoiner...
A New way to support the channel. Send a donation direct to me via my Website - bradshawjoiner...
If you’d like to support the channel so we can make more videos please consider becoming one of our Patrons or sending a one off donation Via PayPal or Give Back to the channel using Super Thanks via the thanks button above.
PayPal Donation - paypal.me/OliverBradshaw
Patreon is a simple way for people to support the channel with a minimal monthly subscription.
If you'd like to support us go to our Patreon page here - / bradshawjoinery
Or you can buy me a beer here - BuyMeACoffee.c...
Help support the channel when shopping on Amazon, if you click this link below before buying anything on amazon, I will receive a small percentage of the sale price. It will not cost you any more, so please help me out if you can.
UK: amazon.co.uk/?...
US: amazon.com/?ta...
INSTAGRAM ► / bradshawjoinery
FACEBOOK ► / bradshawjoinery
WEBSITE ► BradshawJoiner...
#Joinery #Woodworking

Опубликовано:

28 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 55

@zephyr1408 8 месяцев назад

I am a carpenter ( finish no where near your caliber ) however ; absolutely just nailed it work ! You should be proud of your skills and charge appropriately!

@benjaqsonworkshop9974 8 месяцев назад

It's outstanding. Outstandingly complex, outstandingly huge and outstandingly beautiful. So glad you posted in this format.

@raydriver7300 8 месяцев назад

What a frame indeed and the ‘dead lucky guess’ is down to seventeen years of dedication, know how and sharp tools. Speaking of which, tell me which tenon saw you’d like and I’ll buy you one 🌞

@dougsaunders8109 8 месяцев назад

Dead lucky experience, the more I practice the luckier I get Edit: re tendon saw recon Ollie could drive a Irwin saw a get a decent finish looking at his hand tool collection

@davidsanderson6044 8 месяцев назад

As a past member of the Institute of Carpenters one can fully appreciate the craftsmanship that has gone into your work. It was a pleasure to watch.

@jimbartley9125 8 месяцев назад

Time. The most expensive part of any job. Excellent work as always. Looking very crisp. Cheers. Jim

@jameshodgins1937 8 месяцев назад

I have said this on everyone of this door frame build video; you do such fantastic work. Can't wait to see it installed and the door build. Thank you for sharing.

@zeuszuki6698 8 месяцев назад

Devils in the detail and you're certainly nailing that! Its looking 😍

@tpaulfelder1 8 месяцев назад

I hope you're on time + materials. I also hope your customer appreciates what he gets

@paulf2529 8 месяцев назад

Im in awe of your skills there, superb work.

@nagwood 8 месяцев назад

I love the paint brush wiper on the tenoner. I'm definitely going to steal that idea!

@user-ru1zh3ct2f 8 месяцев назад

Brilliant Carpentry

@mikegough4760 8 месяцев назад

Once again great content Ollie. May I just put it out there, if there is any joiner/ woodworker who can produce such amazing work please, post it as I can’t get enough of such incredible skills.

@davykins 8 месяцев назад

You are a talented man , lovely to see the improvisation , i havent seen a hurdle you cant jump yet :)

@chrisbradshaw1144 8 месяцев назад

Wow. You sir are a true artist. Fabulous workmanship

@vanzipper6486 8 месяцев назад

6.05👌perfect!

@MrAidanfleming 8 месяцев назад

Loving it so far, looks awesome! Please get a fitting video. Even if it’s just a Timelapse ❤

@Sentence3 8 месяцев назад

Most people have no idea why bespoke joinery costs so much- I’m so glad you’re putting out these vids, might educate a few clients (and most certainly a few joiners as well!) Looking forward to watching the glue-up….and be glad it’s you, not me! Cheers, Ross

@justicecase19 8 месяцев назад

I'm so in this amazing job, if you filmed 3 hours of sanding I'd probably watch it.

@BradshawJoinery 8 месяцев назад

Will test that 😂 cheers bud. I think I've just watched 3 hours of sanding in edit.... After spending all day sanding FML

@gillie-monger3394 8 месяцев назад

Another 10 / 10 mate 👍

@justjacqueline2004 8 месяцев назад

Beautiful craftsmanship.

@michaelplays2449 8 месяцев назад

Looks Fantastic !!!!! well done

@si4651 8 месяцев назад

Would be interested to hear what paint you use and why, and why you might not use something else etc. Awesome video, awesome work!

@bchdsailor 8 месяцев назад

Still extremely impressing craftmanship

@stephendixon8575 8 месяцев назад

Magnificent Oliver. Now I know you’ve gone over this point before, but the more I see of this epic frame nearing completion, and seeing all those glorious, shimmering sections of grain direction changes, the more I just keep thinking what a crying shame it is that those beautiful timber details are going to be covered over with paint. Out of curiosity, have you shown the client any close up images of this piece part completed? It got me thinking that if they saw the almost holographic effect grain details they might very well change their mind and ask for a clear finish. But then again, you might not want to … Just imagine all the extra sanding and you’d end up doing to ensure it all came up to your exacting and commendable standards if it were all going to be on show 😂 🙌 🙌 🙌

@ragnarironspear1791 8 месяцев назад

Beautiful work 👍

@ikust007 8 месяцев назад

Gorgeous work mate

@Dazza19746 8 месяцев назад

Looking brilliant mate! I hate putting skittery little peices through spindle, always skippy / sh#t finish I worked out on little bits and bobs pieces if you just run small piece through with a bigger section of exact same thickness, the feeder pulls it all into fence lovely, and you get one up on the spindle as you’ve fooled it into thinking it’s a normal piece! 😜 But that solid bit of ply is a great idea! Always a nightmare trying to clamp something. I think I’ll copy this one! Just got to find hardware that will bolt to that big slot on aluminium sliding table 👍🏻 Ps. You should try those torquata dado blades I mentioned before, fantastic for the money! Super clean ‘flat’ cut ( no ‘vee’) and available in all sorts of of common bore holes ( get your mind out the gutter) Cheers 👍🏻

@Christopher-pf8qt 8 месяцев назад

For a million dollars I couldn’t have kept track of the joinery.

@IvanTheUndertaker 8 месяцев назад

Fascinating. And beautiful work. What determines when you decide to cut a rebate using the circular saw, rather than the spindle moulder? I notice you were mostly feeding the spindle moulder by hand.

@fatfish6763 8 месяцев назад

NICE

@paultay23 8 месяцев назад

Great video again Ollie... btw, you got another recommendation from Keith and Matt on their Workshop Banter Podcast (worth a watch or listen guys) Cheers Paul

@eatdrinkwineguy 8 месяцев назад

I never quite understand what you are talking about till you start doing it. Always scratching my head wondering what you mean. Too funny. Watching you always reminds me that so many of these things just require time and effort. I know it sounds obvious but you can make jigs, have the tools and all that but often you just need to slow down, creep up on things, stop and think ahead, and take your time to do it right. Often there is no quick fix or easy way out.

@davelethaby1279 8 месяцев назад

In Aussie lingo we'd say ... 'She's a bewdy, mate!'

@mg3289 8 месяцев назад

👍

@gregorymacneil2836 8 месяцев назад

The worst thing you can do is finish something - building frames / shells go up quickly - boat hulls get built quickly BUT the minute you start to finish the building (interiors) or fit out the interior of the boat your productivity goes down.

@whitehurstathome 7 месяцев назад

Ton of detail! How much is a piece like this? Seems like you would have a few weeks of labor in it, plus all of the materials.

@BradshawJoinery 7 месяцев назад

Probably looking around £10k when all said and done

@mattcable6379 8 месяцев назад

Is it the camera or is it only 5ft tall? It can't be for a hobbit hole becasue it's not round... 😁 Amazing Ollie!

@BradshawJoinery 8 месяцев назад

🤣🤣 hopefully it's not 5' tall 🫣

@vanzipper6486 8 месяцев назад

👍🥳👍

@neilhowarth9362 8 месяцев назад

Mint are you making the door aswell

@Samwise457 8 месяцев назад

Abit off topic… i bought a festool countersink the 5mm one, it doesnt fit in my centrotec chuck, the square bit on the shank of the countersink seems slightly to large to fit in the chuck, do you have the same problem?

@troyqueen9503 8 месяцев назад

👍👍🌴🇨🇦

@user-fq4qk9wz5k 8 месяцев назад

Looks like it’s all dovetailing now if ull pardon the pun

@rafezetter8003 8 месяцев назад

LOL @16:00 does your bandsaw play any other tunes?

@BradshawJoinery 8 месяцев назад

Haha, she's a tuneful old girl. Not to everyones taste though 😂

@richardstevenson2727 8 месяцев назад

👊🫡

@mortenbaun5812 8 месяцев назад

🇬🇧🇩🇰😲

@rafezetter8003 8 месяцев назад

I'm not worthy to even watch you do this - let alone attempt it myself. - I would already have screwed it up 20 different ways before you go to this point.