The Cost To Demo, Remove and Replace a 24' x 24' Garage Floor

Подписаться 300 тыс.

Просмотров 12 тыс.

50% 1

#EverythingAboutConcrete #MikeDayConcrete #replacegaragefloor
In this video, I'm telling you what we charged to remove and replace this garage floor with a brand-new concrete floor.
The original concrete was very cracked and broken. I hired an excavator to jackhammer and remove the old concrete, haul it away, and re-gravel and re-grade the sub-base.
After that, we installed a vapor barrier, rebar mat, and form boards and re-poured the new concrete floor.
In the video, I tell you what this job costs for demo & removal and for re-pouring the concrete floor.
For more information like this, Join The Concrete Underground below.
EMAIL ME - www.everything...
LEARN FROM ME - PRIVATE MEMBERSHIP AREA:
www.theconcret...
GARAGE FLOOR EPOXY FLAKE COATING COURSE:
www.theconcret...
MY STAMPED CONCRETE COURSE:
mike-day.mykaj...
MY CONCRETE SLAB COURSE:
mike-day.mykaj...
FOUNDATION CRACK REPAIR COURSE:
mike-day.mykaj...
GARAGE EPOXY FLOOR COATING COURSE:
mike-day.mykaj...
VISIT MY WEBSITE:
www.everything...
USE THE SAME TOOLS I DO:
36" MBW POWER TROWEL:
imp.i284638.ne...
ScreeDemon Gas Powered Vibratory Screed:
imp.i284638.ne...
Screedemon Battery Powered Vibratory Screed:
imp.i284638.ne...
14' Screed Board for ScreeDemon:
imp.i284638.ne...
MARSHALLTOWN SHOCKWAVE VIBRA-SCREED:
amzn.to/2tZ79ti
TOPCON LASER LEVEL:
amzn.to/2VrJ3zV
DEWALT PENCIL VIBRATION TOOL:
amzn.to/2Km5Zis
INVERTER GENERATOR LIKE WE USE:
amzn.to/2XfWfwe
BULLFLOAT:
amzn.to/2U1Kx2F
HAND FINISHING KNEE BOARDS:
amzn.to/2TZmTUj
MAG FLOAT & STEEL TROWEL SET:
amzn.to/2IgmDOq
2" MARGIN TROWEL:
amzn.to/2G33KNn
CONCRETE PLACER OR KUMALONG:
amzn.to/2I00gxp
CONCRETE FINISHING BROOM:
amzn.to/2UytU2B
CONCRETE SCREED:
amzn.to/2WZxtwm
CONCRETE EDGER:
amzn.to/2GbGkEp
CONCRETE GROOVER:
amzn.to/2PaL414
BOSCH HAMMER DRILL:
amzn.to/31AHnaN
MY RECOMMENDED TOOLS PAGE:
www.everything...
SUBSCRIBE to my email list and get my FREE video guide on how to get the perfect broom finish on a concrete patio:
forms.aweber.c...
Follow me on Twitter:
/ creteexpert
Follow me on Instagram:
www.instagram....
Follow my Facebook Page:
/ everythingaboutconcrete

Опубликовано:

23 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 68

@niceashcigar4476 7 месяцев назад

Mike, Darn, Luke Thank you for all the wonderful advice on how to do concrete. I just built a 24x40 pole barn a few months ago and last Friday poured the concrete 12 1/2 yards. I know that's not a very big pour for you guys but at 61 yrs. old and doing it by myself I wasn't really sure I could pull it off. The concrete driver thought I was crazy but I followed your steps on getting the truck empty so I could get it screeded and bull floated before the next truck arrived. I was probably over the time by 10min, but the driver didn't mind I think he was more in shock that I was able to do it. I was going to send you some pics but cannot thru you tube. Your videos make it easy for anyone to be able to diy there on project. It all started watching your video one-man concrete slab pour. best wishes The Cigar Man

@Dawood4 5 месяцев назад

How hard do you think it would be to demo and repour a 1.5 car garage? DIY possible?

@keithgeorge2541 7 месяцев назад

A little bit more work when it’s just two guys… nobody to fill in the low spots or pull down the high spots when you’re screeding… but you two are real pros!

@jakeschisler7525 7 месяцев назад

I helped my Dad pour his driveway and patio once and he had a few other people helping so it was interesting. Later in my life I put in a pad for a dog pen and mostly just screed it off and I had my father in law helping and he had never done it before so as long as I got it down pretty level i was good with it. I didn't have any tools that I remember. I had a truck deliver it but if i have to mix it up in bags I never get it mix up the same each time.

@jjlopez3058 7 месяцев назад

Mike you are a pro, thanks for all the knowledge sharing.

@mooosestang 3 месяца назад

I need to get this done. I think my detached metal garage is slightly bigger. the cracking didn't bother me for the past 10 years really, but after buying another car and parking it in the garage it has gotten worse. Sucks! Plus i'd want it thick enough for a lift in the future so more cash!

@daveyconcrete9801 7 месяцев назад

Ayuh did a couple of these last summer at $9k in Scarborogh.

@davidfriesen3536 7 месяцев назад

Is that near Toronto ontario?

@daveyconcrete9801 7 месяцев назад

@@davidfriesen3536 exactly

@daveyconcrete9801 7 месяцев назад

@@davidfriesen3536 Maine

@gloriahennemuth5413 5 месяцев назад

Can you share your business number?

@rcote1234 2 месяца назад

Great job. I need the same project at my home in upstate ny (vt line)

@tudorgheorghe4532 7 месяцев назад

Here in Europe we could use those fiber bars only on certain concrete block s placements ,slab on floors like ground works but not for structure ! Anyhow mybe worth to mention that the ground preparation required more dampth then regular iron bars .the distance between fiberbars should be betwee0- 10-. 25 cm maximum m

@skwerlz 7 месяцев назад

Honestly thought that number was going to be 1 higher. That's pretty reasonable considering man hours, overhead, and materials. Guess some people forget about the overhead.

@paulmcdonough9319 7 месяцев назад

Hey Mike, why not take the concrete out yourself? It's not a very difficult job with the right equipment. One day 5k to take it out make at least $3,500. Then pour the floor make another couple grand...

@seancasey2444 7 месяцев назад

I know I'm surprised he doesn't do the rip out and the grade work himself make that easy money like victory does

@jessoftherocks 7 месяцев назад

Pulling. Skreet and stepping back...ugh my back.

@MarkOstrowski-kp1cc 7 месяцев назад

Mike day please

@mikeknoll1130 7 месяцев назад

2 pro,s reading each others minds, great job, 5k on removal seemed high, but I wasn’t there.

@alanhiggins2928 7 месяцев назад

The Demo of the old concrete seems very expensive to me, I think if it was my job I would get another quote for that! I might be out of touch with that sort of work but it just seems a lot!

@VitoRagone-pu8rm 7 месяцев назад

Definitely too high, no way the cost of removal is more than the cost of concrete, rebar, plastic and pouring. I've been pouring concrete in northeast Ohio for 35 years and no one gets $ 9 a sq ft for removal.

@michaeldavid2320 7 месяцев назад

@@VitoRagone-pu8rm yep, after hearing that i think Mike should be in the demo business, pays better with less work.

@keving4304 7 месяцев назад

How much damage to the driveway from the concrete truck?

@oby-1607 7 месяцев назад

No power screeder? Especially when there is only 2 guys to work this. Just thinking about your back. What was the slump on this?

@tnolan3176 7 месяцев назад

Cant use a power screed when there is fall to the drain !

@GearAmazing-yn7xv 7 месяцев назад

Wow $8+ a foot to demo. Those guys are killing it, unless you've got extremely high disposal fees there!

@ChiliToday-HotTomale 7 месяцев назад

👍

@JimZ14 7 месяцев назад

So does the $1,500 cost of materials come out of your total price of $4,000? Or do you add the cost of materials on top of your total price of $4,000?

@user990077 7 месяцев назад

Fiberglass rebar is great for installers but years later when concrete is recycled and crushed into road base the crusher won't be able to magnetically remove the rebar.

@user-tn2os8ts7h 7 месяцев назад

.75 of a day for the excavation part. Call it a full day at that point. They probably dumped the concrete at their pit and brought in gravel they had at their pit that was leftover from another job. So basically 5k in labor

@nicholasjohn1001 7 месяцев назад

I had a 40x44 barn poured for $5500 and that included the grading…

@derekbutts1782 7 месяцев назад

Machine finished ?

@R2Mike 7 месяцев назад

At 4 inches thick that wouldn't even buy the concrete in my area. It's 220 a yard here

@derekbutts1782 7 месяцев назад

@@R2Mike same here lol

@nicholasjohn1001 7 месяцев назад

@@derekbutts1782 part of it was machine finish and the other part was a broom finished porch.

@nicholasjohn1001 7 месяцев назад

@@R2Mike it was 4 inches thick with fiberglass. It was also a Mennonite crew so I’m sure that helped with the cost. They did a great job though.

@lesjackson6575 7 месяцев назад

Why pour a garage floor on poly

@jamesnm21 7 месяцев назад

Keep moisture from coming up through the slab. Dry concrete is happy concrete.

@lesjackson6575 7 месяцев назад

@@jamesnm21 I've owned my masonry company since 1990 and have never poured a garage floor on poly. At least not in Upstate NY we don't.

@jamesnm21 7 месяцев назад

@@lesjackson6575 apparently it works, especially if you plan to put a coating on the floor where blocking moisture is key.

@seancasey2444 7 месяцев назад

5 grand for 6 hours work I'll drive up there from Florida for that easy money.

@bigsmoke7381 7 месяцев назад

Do you get permission from the home owners to back up the concrete truck onto the driveway? I’ve mad this mistake before and had to patch someone’s driveway

@VitoRagone-pu8rm 7 месяцев назад

I never back on existing driveways. We buggy everything in

@bigsmoke7381 7 месяцев назад

@@VitoRagone-pu8rm I do as well now learned that mistake already

@rongrose3746 7 месяцев назад

The $5,000. Seems high to me for a one day job of demo ?? Your price seems very reasonable !!

@jamesnm21 7 месяцев назад

It's way too much. You can charge 250/hr for the machine plus pay yourself 50/hr that's 2100 for 7hrs plus 500 for gravel, 500 for fuel and dumping which they probably aren't even paying to dump it if they take it to a paving recycler. You're at 3100.

@GearAmazing-yn7xv 7 месяцев назад

You can guarantee his demo guy always answers Mike's call lol. Killing it

@tudorgheorghe4532 7 месяцев назад

Again local codes throne but the earth can not be to much different !

@tudorgheorghe4532 7 месяцев назад

The best garage drain option sloping twourds outside mains door always ! Maybe could help your future customers this advice ! To me this kind of small center single drain is overkill for downside aspect of drainage ! Customers and you hope will appreciate the crucial aspect of this❤

@Ray_1990 7 месяцев назад

You get what you pay for cuz concrete ain't cheap!

@extrainsulation 7 месяцев назад

$5,000 for 2 men to work 6 hrs taking up a concrete floor, Mike you need to switch gears 😂😂😂. Start demo, not laying.

@John-Rambo81 7 месяцев назад

That seems high to me too. $

@bryantbrito2467 7 месяцев назад

Shoot I'm in the wrong state!

@michaelmackey754 7 месяцев назад

I am in the concrete, crushing business I need to also get into concrete removal apparently… Lol

@OnGrade 7 месяцев назад

Yeah, the first thing I did when he said that was the math. He did say the guy did the dirt work too. But this still seems a little high to me. I'm in N Utah and I'm 5/sqft to remove and haul off concrete flatwork, and I make money doing it at that price. For me the prep/dirt work to replace would have been factored into the placement cost so I don't have a true comparison for that. But in this case, and at my price point, it was $2120 for the guy to rake it smooth, lay the vapor barrier and place the rebar. That part of it sounds like a complete rip off to me. That's why I do all my own demo work. I'm a licensed Excavator & Concrete guy.

@jimrowland8310 7 месяцев назад

I did think that too, but then you think that guy has got a dump truck , skidsteer, jackhammer attachment, those items aren’t cheap plus he gets rid of the rubble . Just saying guys.

@MarkOstrowski-kp1cc 7 месяцев назад

Can you please say my name on your next video please

@andrewbartholomew5876 7 месяцев назад

I’d charge $20K all day!

@OnGrade 7 месяцев назад

@andrewbartholomew5876: Where are you located?

@tudorgheorghe4532 7 месяцев назад

Sadly the new fiber bars are not the future ! They supposed to be double size or triple like more dense , because of their elasticity they are prone to crack more easily the concrete block ! Useless !!