The CRF150RB Gets Some Upgrades! | (Alexis Installs) 

Tusk needs to sponsor her 😂

Not gonna lie I thought I was gonna get bored of watching after 3 minutes but I'm actually making it till the end so far so good👍

She’s a keeper boys

Cooter pin lol 😂🤣... good job lexis

Seat cover makes such a huge difference 🔥

After washing and drying my air filters ( I have 3 for each bike) I use maxima sticky blue filter oil. Stuff is super nasty but catches everything. I put a big splash in a plastic grocery bag, drop the filter in and rub the oil into the filter. I put lots so no area gets missed. Then on the filter seal (orange part) I use waterproof bearing grease and enough of it. Clean air filter every ride on 4 stroke race bikes is a absolute must... they rev super high so that means crazy amount of air going through the engine at max rpm. If sand goes in, its toast. Be sure to inspect the seal and make sure its perfectly placed. Last clean the securing bolt and grease the washer to stop the sand from entering. In the 80s we used chain saw bar oil , it worked. But the maxima sticky stuff is the best stuff I've come across, I clean my filters in a 5 gallon bucket with a raised screen floor in it so sand goes to the bottom, wash with dish soap and water. Squeeze and hang dry in a dust free place

Every girl in 2020: “So I bought this off amazon”

Thank you so much guys there's never a time I don't learn from you guys

🤦‍♀️ Diesel! I lost it 😂. He's a good dog and absolutely fits right in to your little comedic family vids.

ooohhhh a black and red restyle kit would look sooooo gooood with the seat

Sweet video girrrl looks amazing and great job keep the great work cant wait for more

She killed it! Great job!

Awesome video Alexis, You killed it.

Alexis YOU KILLED IT! awesome video, youre a PRO! You cant not start up a channel after that killer edit.

Pretty good! My CR80's seat needs redone, it looked like peanut brittle before I did the lazy white duct tape over it.

PS I've been offline for a couple of weeks due to this scenario we live in but gunna binge watch your back catalogue tonight!!

Perfect timing... I just purchased a tusk brake lever as well

Looking good. I love the foot pegs, shifter and brake lever. Would look great on my CRF250L. I always say "It's not a project until you bleed on it."

Great vid! I needed this help

Great work Alexis. Your bike is beautiful and to your liking. Nice to see u do it all yourself. Keep up the great work!!

For seat covers,,, HEAT GUN OR HAIR DRIER , warm it up and it will stretch and form to the shape of the foam real nice n tight. Light spray of upholstery glue over the foam helps the foam stick to the plastic base and keeps the seat cover sealed from water.

Alexis done a great job doing her upgrades. Looks great

Cooter pin!!! I love it. Thx Alexis

Wow great Job Alexis . looking forward to seeing you wrenching on more bikes.

I was expecting to read “builds by Elky” 🤣🤣🤣

Nice job! I'm impressed. I would apply some white lithium grease on sealing ring of air filter.

Great job Alexis ! 👍

That rear brake pedal is cool. Seat looks great. Good work!

Awesome video..great job,learned something.

Tanner, you're fired! :)

Great job, Alexis! Im impressed that you know the correct termanologies..... “Cooter Pin” 😂 Ride safe!

Loved the new seat looks amazing

Excellent job Alexis. You and Tanner are my favourite You tubers. Keep up the great videos you two.

Nice job Alexis!

Great Job Alexis !! 💞

Great vid girl bike looks nice! God bless.

Nice skirting work Lexi!

Some black number plates will look good with the seat

Hey good job, it looks great. Keep it up guys... 👍🏼👍🏼👊

Love your videos guys great job alexis

This video could be called hot chicks work on stuff! HAHA!

New favorite RU-vidr

Wooooo!!! 😂👍

Nice work

Diesel started barking and Jack went nuts. He understands.

Nice love it

I love the 150r It’s great on tracks but if you ride it in the woods like me it’s awesome to climb up hills that go straight up like walls

Good job Alexis might be on to somethin with that bar filter oil lol 😄

Use fab 1 for lubing air filter a can lasts years and makes it super sticky and its blue so u can see

Tusk also makes a SPRING PULLER. 😉 Also, use No Toil on your filter.

My quad going to the shop next wendsay!!

New bike parts are the best :D

Nice Video!

This content is godly

I like the lex only videos lol dont take it wrong tanner she is much more pretty

The hardware that came with the brake pedal is to have the engine mount bolt go through the hole of it. If u take a digger then the cable will most likly rip through the plastic skid plate

I’m sure you are liking the brake lever. It looks cool and it is functional. I just cut the cord off of it tho because it got in the way when I wanted to work on the bike

Great job! Replacing seat covers suck! But u did a good job looks minty👊

Been there done that just buy a new seat next time and either keep the old one for a spare or sell it I did it on a ttr125l in 2003 put a high-rise foam in new cover on it did it in an apartment it was fun though

Great job on the seat Alexis ,looks like a very tedious procedure.Bike looks great!

Nice job

Should put grease inside the brake pivot when you have the bolt out.

Nice

Good looking girls and bikes 🥰 already know all this but keep waching anyways 😂

I have an ocd with that bubble in the seat 😂😂😂

Damn it, stop throwing stuff on the floor of my shop for me to pick up and disorganizing my shop! You already do this to the sewing room, spare bedroom, laundry room, dining room table, kitchen, and all the closets you do this too! Wait... these may be my fiancee's problem. Anyone else have this problem?

You 2 should just open a shop to fix and flip bikes. Also a tip for Alexis. If a guy tells you to smell something, you probably shouldn't.

I like her vids no show boatn lol i could get use to this tanner does make a better camera boy than host lmfao 🤙🤙👍

Cool vid, and also you don’t have to have that piece of foam covering the hole above the mud flap at the bottom. They don’t come with it.

Guts racing Has Seat foam for the 150rb

love them bikes getting a r or rb in a few months depends on how tall i get

is it possible to change the foam to a wider one? like the ones on the Xr150?

I waiting to see an African Twin purchase and review ---- then resell

Professor teaching the pupil.

What size staples did you use for the new seat cover?

I'm 5'5. Am I a good size for this bike?also I'm a beginner should I get the 150rb or the 150f

Your so cute Alexis keep up the good work

Hi, why did you attach the cable between the foot peg and skidplate?

Hi! loved the vid, how tall are you? I am looking at getting this bike since kx250f feels to big I cannot reach.

Nextime do a "Ladybug" on filter (straight from a bottle) squish it and spread it 👍😎

Alexis has a sick bike. On my 150rb does the coolant pump and radiator make noise in general?

Oh ok Alexa taking over some get a sponsor

Mi amor más me gustó el original se ve bonito en rojo saludos des de ecuador 👌😘

I’ve never seen a brake lever that came with a wire the mounts to the skid plate before. I feel like it would get in the way but I guessing it doesn’t.

I use brake cleaner on my air filter

Hey Alexis, what brand (model) of tire do you run on your 150?

A Diesel f.....g the momentum.

Wait... did you end up getting the crease out of it? That was the hope in seeing the whole video (and what you did to fix it). I have to fix the cover on my Son's bike which had the same crease. Oh joy

My dirty air filter is the same as there clean one

Never seen anyone oil an air filter , what’s the reason?

that is why i remove my seat each and every time i wash my bike. (with an airbox cover)

his transition has gone really well

Graphics should be next

How often do you change the air filter?

What kind of footpegs are those

How cute it is if you'll be having a child with mr. Adventure daily and soon becomes a rider.🙂

Why didn’t you just get air filter oil and why didn’t you put waterproof grease on it???

Can you send me the link to that skid plate please.

You could sell that leather on offerup or Facebook for someone whose seat is torn

Yowza!