The Dirtnali goes back together and the pile gets bigger! Part 8 of the 2018 Sierra Denali build 

One of the best, if not the best rebuilder on RU-vid. He takes pride in his work and doesn't cut any corners. I'd feel 100% confident purchasing a vehicle from him. Can't say that about the majority of rebuilders I've watched on here.

OUTSTANDING JOB ! You take pride in what you do. Your a hard working Master Craftsman. Your wife is a hard worker too.Enjoy watching your builds.

You make it look as easy as playing with legos. Anytime I go mechaniking the car ends up with a lower curb weight because of the bits I don't put back in. You are a master making the old new again.

The best rebuilder on RU-vid keep them coming don't stop

Another A+ flick!! One of the BEST characteristics of your videos is they aren't dubbed full of obnoxious music! I'd much rather listen to nothing, your narration, or the hum of your impact driver. Thank you! I've never used Bauer cordless tools. They look like Milwaukees. Might have to order one the next time I'm in the market for one.

"Sometimes it goes in, but most of the time you gotta pull it out." Wiser words were never spoken. 13:58

You’re the only person I would ever buy a salvage title vehicle from. You do outstanding work.

While watching you rebuild this truck, your attention to detail is far none the best I have seen. First you record the process of rebuilding it, then you spend even more time to narrate how you rebuilt it nice and steady, all the while making it interesting to the viewers and not losing their interest - squirrel - see, never happened....can’t wait for the finished product! Most likely it will be better than new... Keep up the great work...😎😎

It's good to see you are reading and replying to comments some other auto rebuilding channels think there to big to read comments so they definitely don't reply. You do a great job, thanks for the great ideas.

A family who rebuilds a truck together will stay together 😉

Even if I never do this kind of work to my truck I certainly learned a LOT!

I remember the Fonz as well. Excellent videos and sense of humor. Say hello to Mr Spotty for me.

Laughing out loud when you said you have to move your little helper... was just funny.

I like the little smiley faces to remind you of things to install. I have forgotten many little things and cursed myself later. You do fine work!

Outstanding job!!! I think the ones who give thumbs down are part of the RU-vid mafia that automatically gives a thumbs down for so many likes. I can't believe it would be a normal viewer unless they're just knuckleheads. 👍👍👍

Hey men you are a great professional and a good teacher I enjoy it when you are bringing all these condemned vehicles back to life you are great men

Attention to detail is second to none! Quality work!

Still love the name "Dirtnali".. classic!!! Thanks for sharing Rich..be safe and have a good weekend.

Gotta give a thumbs up for a Fonz reference. I mean, it's his trademark! Yes, I'm that old, too. Ha

Just got off vacation my self, good to see smiley lol. With as much dirt is on this truck it makes me think it was a work truck for like a mine or lumber company. Explains why it would have ton of extra dirt.

It’s taken me all day to watch this video. If you ever feel like doing charity work you can come fix my hooptie I wouldn’t stop you at all

Yep, I always press the thumbs up before viewing as well. I’ve never been disappointed yet, and don’t intend to be either. Waiting for the 1,000,000 mark too.

Your quality of work is above high standards. Great work can't wait to see the finish product...

I visit all the socks I've lost over the years whenever I travel to Narnia. It's a wonderful place.

Good news is you’ll have plenty of topsoil from the Dirtnalli to have a good garden this year 😀

I see the notification and I click. Enjoy watching you skillfully do what you do. Props.

The Dirtnali is almost back to a Denali! Nice work Sir!

I like the work you do so well that I would buy a truck you built. Usually I don't want a car that has had body work because most people don't do quality work, but your work looks great to me. I especially like the attention to detail regarding rust protection.

I will pay to came and help you whit you rebuilds and learning from the best is priceless you have for me one if the best rebuild channel in RU-vid

Need to make a t-shirt with your “helper “ on it.

who else smashes the thumbs up before the video starts? 👍🏻

The Denali is well built, you don't see water barrier's made out of rubber on ordinary cars,

Props to Your Loyal Assistant ☺. Another FANTASTIC Episode of Arts & Crafts!! Till Next Time...

Great job!!!!. 👍Can you please do a video on how you keep track of all the nuts & bolts?

Good morning Scott, what, no back belt support this week? You must be feeling alot better. Once again your memory astounds me. Knowing where everything goes without reference pictures just impresses me. Thanks for another great video. You take care.

Nice to see no weight lifting belt, your back must be doing better great videos

The Greatest informative build i ever liked. simply you're the best Vehcor! I wish I am your Padawan

Enjoyed the heck out of every video concerning this truck. I’ve got the 14 Ltz duramax. I’m ready for another video.

A genius at work...I respect you

The “Sticky” smiley face was a nice touch! As always a awesome rebuild of a dirty truck!

Just binged watched this build. I didn't think you would have the patience to film this much info and sharing it in a concise matter. This is not a how-to video but if you follow along you learn a lot just by paying attention. It certainly demystifies a lot of the "I wonder how that goes in there?" questions most of us have about taking a car apart and putting it back together. I look forward to finale of this great build. In the meant time, I'll catch up on the other builds. By the way, you didn't clean the window on the right back passenger door. 😞 Now that's gonna hunt me forever!!! Take care.

Your work is incredible, NO shortcuts. I thought for sure you were gonna masking tape the wire harness onto the headliner. NOPE even in a hidden area you go for stock look. Ahhhhhhhhhhhhhh and now you just commented on it as I was typing , lol. If that were my truck and one day I went to sell it.... I'd brag you rebuilt it and show them this video. Hell your work is as good if not better than the factory. lol

I can't pinpoint a specific vehicle, but I recall a couple vehicle repairs in my past that were finicky to clear codes and all it ended up needing was a couple key off cycles to completely erase them. I'm sure you know better than I do that manufacturers aren't always the best about providing that kind of accurate, thorough, and honest service information. One case I can reference to that point was an 08 Escalade where the customer brought it to us wanting to flash his new PCM. The service info was adamant that we could no longer do the 30 minute key relearn. I did the 30 minute key relearn. I hope that helps someday.

I like how you have a lot of patience

Wouldn’t it be better to use clear silicone when you’re glueing the wires to the headliner? I just would have thought silicone would be cleaner and faster than a glue gun. Great build, nice patience, can’t wait for the final video to see how she turns out!!

12:45 "little bit of patients..and swearing" haha isnt that the truth haha good work as always.

Hi. Love your channel and your builds. Couldn’t help but notice the struggle with the wiring harness through the dash. I’m not an expert in autos to your degree but drawing on a cabling past best way is to tie a strong twin to the harness prior to removal. Once through the dash cut the twin off and leave in place. When you return the battle is much easier. Keep the awesome videos coming.

Good sense of humor goes very far! You had me cracking up!

People disliking a "Dirtnali" video bc it's dirty...Haha. Another great video of your meticulous progress on the truck!

Spotty really sticks with you

Funny as always. Glad to know the panels just pop off. My truck had a sugary coffee spill all on the dash and console. Every time I think I’ve got it, something else pops up. Glad they’re really simple if you pay attention. Thanks

I'm wondering if the truck would have more value because of this video documentation? Great job creating the content and sharing your knowledge.

I hope you left a smiley face on the headliner for the next guy haha. Nice work as always

Every time I see your helper “tape face” I always think of his Uncle Kilroy, yes I’m THAT OLD🤣😂🤣😂. Great job, glad to see you got your back, back.

I love your videos. You ar3 the best on you tube rebuilding cars & trucks that I’ve seen. Thank you

I like that you take the time to do things right. Something as small as pulling the trim gasket out after installing a panel. I have had body work done in the past and I always find some area where they lacked in details. Props to you sir for acknowledging the smaller details in BIG projects like these.

Nice!It takes a pair to do all the work you've done to bring this truck back from death's door.I have two,a 96 and a 97 and love them both,super dependable and my favorite thing to do is pulled logs out of the woods with 4wd.Congrats!

At least you can say one thing about this truck ... the previous owner wasn't afraid to use it! Cleaning it, though, was a whole other issue! :o)

So I'm a fairly patient person but you've got it mastered. Great build! Love the happy helper, great guy.

Absolutely fantastic work sir! Do not mind the thumbs down, there are clearly jealous they don't have a hand built Denali HD for the fraction of the cost!

Another great video, thank you. Looking forward to seeing more videos from your work.

Great video as always! Looking forward to seeing it done

The truck is looking good

Excellent Video. Glad to see the back is doing better. The Fonz reference is for all Legends out there i'll guess. Hell of a job your doing on this one.

Looks like you back is feeling better

Enjoying these videos, great work, and attention to detail 👍

Awesome job learned a lot from this build, thank you

tell all the nice helpers Ronnie said hi and nice work bro

Very impressive quality job right there!

Another great video can’t wait to see the complete video

Your the best u show everything keep up the good work thank you so much

Coming together professionally well done....

Awesome work! Learning a lot from your videos. I have a 2016 sierra and this helps. Thank you.

You are very cool and deserve the support of your follower from Saudi Arabia👍🏼👍🏼👍🏼

Like it never even happened! Great job, detailed explanation. Luv the channel!

yow i swear your the best fixer that i dont know that i wish i did!! always a pleasure to watch!

Another fantastic video. Thank you

been very enjoyable and educational build!! Great JOB!

When all said and done your going to have beautiful truck

I was waiting for the big "reveal" of the finished truck! This was a really awesome job, let alone the awesome video, commentaries, tips, do's & don't s, etc... was really an amazing job in itself! I know that the extra time & work to make the video alongside the actual work was outstanding! Thanks a million, I now have a totally different & much better appreciation for my body shop for repairing my 2004 Silverado crew cab, in trying to save it from being totaled after a tornado came thru town back in December. It received over $6,500 worth of damage & was so close to totaling it, no wonder he didn't want to change the right rear cab corner pillar, there is so much more to the skeleton behind all the "pretty stuff". You did an awesome job, what were the total man hours & repair costs, for this $70,000 truck in the end? I'm sure it was well worth it, but I can now relate to body work from a whole new perspective! THANK YOU!

Waving back and thanks for sharing another informative video.

Awesome! You pull into the local gas station and someone says, "nice truck. How much it run you?" And you say, " I bought it wrecked at an auction and did all the work myself!" Nice!

Awesome! Almost done!

Thanks, yet another great video!

That's a hot pile!

As always, thanks for the video. I hope you enjoy this truck. You have more than earned it.

That must be Vehcor smiling😂👍

I see your got your own Wilson just looking at you working 😂 . You are doing a awesome 👏 job on that truck. 👍🏼

Lots of work, thanks for the video!

Nice work again!

One thing about it, you know your stuff, I would be putting labels on everything. Enjoy your videos very much.

Definitely one of my favorite channels

Love your sense of humour that you incorporate with the build me old flower excellent work. Gary.... England 🇬🇧

Greatest viewer response ever at 23:43. Thanks for another great video again!

I don't know what's more impressive....your work, or your biceps! Lol!!

Great video, the truck is looking great.

Cracking job, cant wait for the reveal

Truck looks great see your back is better keep up the great work

Great work 👊🏼

Heyyy. yep, I'm that old too. Great attention to detail, and definitely Fonz approved.