The El Camino is coming back to life and there are some issues to address. First off, the brakes need to be taken care of. The rotors have stress cracks and the rear drums are glazed from the years of burn outs with no line locks. These brakes were getting to be a little scary to bring this down from 100+ mph passes in the quarter mile. To fix this, I’m replacing all parts on the front discs and rear drums, and I’m installing a Line Lock to help me out in the burnout box. I’m not stopping there, I’m also going to swap over to a manual master cylinder from a vacuum assist system. This does a large number of things. It frees up space, saves a little weight from the vacuum booster and will give me a better pedal feel to make staging the car at the track much easier.
I’m using a kit from ManualBrakes.com which includes the master cylinder, firewall adapter and all the parts to make this happen. Here’s a link to the kit: www.manualbrak...
I’m also using a Line Lock like this one: www.jegs.com/i...
Starting out, the drum brakes on the back are my first step, I’m not fond of working on drum brakes, so I decided to get them out of the way first. I’m replacing the shoes, the drum and the wheel cylinders so I can start with a clean slate. I also found a trick to install the clip style wheel cylinder in the video. Most of the parts are normal replacement parts from AC Delco.
The Front Discs are easy by comparison to the drums. I’m replacing the rotor, the caliper, brake hoses and the pads. The calipers are remanufactured, which is important to this install. The original calipers were low friction and had extra features that do not work with a manual system.
Finally after the parts replacement came all of the modification for the manual master cylinder. The removal of all the old components comes first followed be a few adjustments to fit the master cylinder to the car. The brake pedal assembly does get removed and modified as well as some of the firewall will need to be modified for clearance for the new parts.
After the master was mounted, the line lock got plumbed once I found a suitable location for it.
I have not yet bled the system, that will be coming up on the next installment! Stay tuned for more!
============================================================
Here’s some links to stuff I like to use! These are affiliate links and I may receive a small commission at no additional cost to you.
PWRCORE 12 Brushless 12V Drill Driver & Impact Driver- imp.i284638.ne...
PWRCORE 12 Brushless 12V 3/8'' Impact Wrench Kit - imp.i284638.ne...
PWRCORE 12 12V Mechanical Light Bare Tool - imp.i284638.ne...
Kimo Electric Ratchet - amzn.to/3XQLpYO
WavWatch - Use Code ERIC100 for $100 off at checkout - www.wavwatch.com
Topdon Jump Pack - Use code SNOW10 for 10% off at checkout through my link - topdonusa.com/...
Want to start a RU-vid Channel? Go here! vidiq.com/Eric...
============================================================
Please check out my partners and affiliates!
Racesponsorshipscourse.net- use code ERICSNOW10 for 10% off the Race Sponsorship Bootcamp
WavWatch.com - Use Code ERIC100 for $100 off of Frequency Therapy to better your life!
Sweetbathandbody.com - fine artisan soaps including the amazing Scrubbie Bar for greasy working hands
Topdon Jump Packs - Great easy to use tools to keep you up and running! topdonusa.com/...
Greezyz Gurage - Liquid Pumice soap and skin care products greezyzgurage.... Family Racing
Division 7 Real Estate - www.division7r... - your northern Utah real estate connection
Master Muffler of Clearfield, Utah - m.facebook.com... use code Snow Racing for 10% off your service
ContingencyConnection.com - supporting grassroots motorsports
RMSTATOR.com - ATV, SXS, Motorcycle and Snowmobile Electronics
Velocity Racing Carbs - / velocity-racing-carbs-... amazing Carburetors built for your needs
6 сен 2024
