The Fastest Way To Ceramic Coat A Car

Подписаться 91 тыс.

Просмотров 45 тыс.

50% 1

The Fastest Way To Ceramic Coat A Car
Traditionally, a ceramic coating job on a car takes a couple days. The car needs to be paint corrected so when you put on the extremely long lasting ceramic coating, you're not locking in any swirl marks, oxidation, deep scratches or damage in the paint. Now if you are going to apply a ceramic coating like Adam's Graphene Ceramic Coating Advanced, the highest concentration of ceramic we offer, you most likely need to correct you finish to perfection before applying. With that said, ceramic coating can be more simple than that. Adam's Polishes created a spray version of the ultra concentrated Graphene Ceramic Coating by adjusting the solvent dillution ratio to raw material. You still get the hydrophobic/water beading performance but have a reduction in protection longevity, but the ceramic coating is much easier to apply. With Adam's Graphene Spray Coating Advanced being rated to last two years doing this process in the video once a year makes ceramic coating your car quick, easy and effective. By starting with clean car and doing minimal prep work, you can ceramic coat any car very fast. Follow along with Adam as he shows you the fastest way to ceramic coat a car.
For more in depth content and education, subscribe to our channel. Leave a comment or question to engage with one of our Adam's Team Members.
•••Become a subscriber to Adam's Polishes RU-vid Channel
/ @adamspolishes
•••Adam's Polishes Website
www.adamspolishes.com
•••Adam's Polishes Instagram
/ adamspolishes
•••Adam's Polishes Facebook
/ adamspolishes
•••Adam's Polishes RU-vid Channel Homepage
/ @adamspolishes

Авто/Мото

Опубликовано:

29 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 54

@TheCreth808 Месяц назад

Project Farm proved that this stuff is legit!

@goldenmanuever1176 Месяц назад

I only have praise for the 1 year and 2.5 year graphing ceramic spray coating. Everything about the product is perfection; from the user experience to shine and protection. I use it on everything; the paint, glass, plastic trim, mirrors, and wheels. Heck I think I even put it on the tailpipe. When you do it right and layer it, nothing will stick to the finish. I thank Adams for bringing this product to the marketplace. Hopefully this summer I get back into detailing as a hobby.

@sumpsgarage Месяц назад

I've been really happy with the Gold/2nd version of this. Use it on both our daily drivers now. Get almost 2 years out of it here in IL and through winters. I do use various drying aids throughout the year and usually do a sacrificial Ceramic liquid wax, which looks like that's no longer available before winter starts. Will probably switch to the Graphene liquid wax as a winter topper when that runs out. This ceramic spray works really well on both dailies that have plastic cladding. Way easier than the 'full' ceramics and high spots are a breeze. I usually use one short nap MF towel for initial wipe then follow with a 2nd of the same towel for anything that missed. 1st towel usually goes into the junk towel bin after doing this but 2nd towel washes out fine. However, neither become fully useless like full ceramic towels do.

@millerdetailing4176 Месяц назад

Great work and demonstration Adam ,appreciate the content and products.

@randybyers7100 Месяц назад

Great Video I just received my Graphene advanced spray and Graphene detail spray also my surface prep today can't wait to use it. just waiting on my clay mitt.

@daking8374 Месяц назад

I used this on my car about a month ago. It’s good stuff. I had a few high spots but following your methods to remove them worked fine

@donttalkwalk 25 дней назад

Thank you for responding. What I’m trying to say is that if you take an old car and use your process to make it look gorgeous like that car then I would be extremely impressed. I have done that to several vehicles, including plumbing trucks that I purchased. I bought a Toyota forerunner 2003 and spent two days detailing it and painting, what was necessary. When I finished, I sent the picture back to the person that I bought it from. They were amazed he said if he could’ve gotten his detailer to look that good he never would’ve sold it. This is what I’m talking about. Thank you.

@davidreynolds5439 Месяц назад

I just purchased a Jeep Gladiator Rubicon in the High Velocity Clear. The super bright yellow. I may try this for the new ride.

@davewallace9048 13 дней назад

You just simplified all the torment in my mind about ceramic coating by BMW. I always wondered about getting the ceramic coat on the trim. Going to use the exact exact technique and see how it turns out!

@j.peterson210 Месяц назад

I’ve had good luck with the Advanced Graphene product in the bottle for two vehicles (2 yrs on one, 1 on other), but the longevity of the spray product on another vehicle was lacking…only 5-6 months. I understand the spray product is not designed to last as long. Due to the time it takes to prep a vehicle, the bottled product may be a better choice.

@yued9898 8 дней назад

Thanks, always an improvement watching your videos. What brand of watch are you wearing?

@csoto23 Месяц назад

First I am hearing about cleaning plastics this way before coating. Also, what about iron remover? I'm definitely going to give it a try.

@KRayxKodessA Месяц назад

I'm curious to know how much "protection" using the Graphene shampoo + graphene detail spray will give you.

@jamesmaxson9142 16 дней назад

As I understand it, the graphene shampoo is not intended to leave or add any additional protection, it just aids in degreasing to help maintain the existing coating

@tony8354586 Месяц назад

Haven’t seen Adam do videos in a while…sales must be down for him to come back and do tutorials!

@philbarrettjr1687 Месяц назад

Nice work . Never knew about the rainbowing on the colored cars .

@goldenmanuever1176 Месяц назад

Or, maybe he has been doing this for almost 30 years non stop and just wanted a break to spend time with his wife and kids.

@areasonablethought610 Месяц назад

Project farm just done a review on Adams ceramic coating and their product stood up better than the 11 others that he reviewed. The have a new customer with me. I hope they have their products at the new Napa that just opened up.

@blh3741 Месяц назад

Can a ceramic coat(Advanced graphene coating) be reapplied without stripping/polishing. IE: wash, clay, and then reapply?

@robertosticca597 Месяц назад

Can u do a coat of adams glaze before applying the coating ?

@bigcountrymopar3351 6 дней назад

So after you used the clat bar and wiped down plastics did you wash it off from the streaks from applying the clay bar?

@dieseldave100 Месяц назад

I used your Graphene Ceramic Coating™ Advanced per there instructions and it left some streaks about 4 inches wide that are visible in the sun, but not in the garage. What should I do?

@user-ri3bf4or5y Месяц назад

Great video, great products! If I already have a graphene ceramic coating on my car so my question, is it better/worse/or no difference to use your graphene ceramic spray or boost to use as toppers to prolong my coating? Which one would you recommend?

@MikeGDetailing Месяц назад

Use the spray coating as a yearly top up after a decon wash to maintain your base layer coating.

@billbuss7542 27 дней назад

Do you prefer a 15 or 21mm polisher?

@Caleb_Johnson 21 день назад

I’m wondering if applying ceramic coating will help my black car’s paint hold up better as I run it through automatic car washes.

@ThatChevy Месяц назад

Is this similar to cilajet graphine spray ?

@ddjjsjxjxx1443 Месяц назад

Which grade clay bar did you use?

@bluegrasscrazy7307 12 дней назад

You should prep with a spray to remove all waxes before doing a true ceramic coating, a true ceramic will not bond to the paint if a wax is remaining on the vehicle.

@kristofferpence Месяц назад

Man, as somebody who has used this a lot- nothing bugs me more than lack of PPE. It works well but there’s some really nasty/dangerous solvents in there.

@andreym325 8 дней назад

How to remove coating from windshield? I have put your product and now my wiper skipping bad, new blades 🤔

@SunSandAndSea Месяц назад

Why use this spray coating VS your small vial coatings? How long will it have to CURE before rain or first wash?

@MikeGDetailing Месяц назад

Some are intimidated by the small bottles. The spray coating focuses on ease of use. It has a 4 hour cure time before being exposed to the elements. First wash after a week is just fine.

@PickupsAreNotTrucks 25 дней назад

What the previous guy said but, it’s also not as durable a coating as what’s in the little glass bottles.

@andrewagee8044 15 дней назад

Do I need to do the surface prep spray before I do this ceramic coating?

@zackbiegs93 9 дней назад

Yes

@ssnobrakesable Месяц назад

Can you use it in sunlight, or does it have to be done in shade?

@luckstersants6362 Месяц назад

they recommend you do it in the shade because you could risk it drying and leaving high spots and you’ll have to apply more to get it off

@bjimsondetailing Месяц назад

is the spray ceramic coating more durable than the one in those small bottles

@jakesta11 Месяц назад

Less durable

@devn3813 Месяц назад

Less durable but easier to apply

@joeysharkey 12 дней назад

I noticed you didn't use Surface Prep spray before coating? Is it only required after polishing? Or was this a mistake?

@punkr6 5 дней назад

Always use a surface prep before applying any type of coating, wax ect.

@joeysharkey 4 дня назад

@punkr6 I do, just thought it was odd it wasn't in the video.

@adhisanjaya235 7 дней назад

isnt claybar leave soft scratch also? even grandma bag can leave scratch right?? they leave scratch in the clear coat, even with water spray. or just try it on motorbike clear coat, its leave "tht soft soft scratch" isnt???

@cleanedbykyle Месяц назад

theres no way thats legit ceramic he bare handed that thing and sprayed it on his skin lmao

@jackmelnikoff Месяц назад

So, if I have a white car, how am I supposed to see the "high spots"? Clearly you can see the surface better on a dark color car to detect the "oil slick effect".

@Bull1the1Great 7 дней назад

Do it when it starts to get dark and use an inspection light with warm temperature, like 2500 kelvin and diffuser if possible...

@ShineAndPreserveDetailing Месяц назад

The spray coating advanced does not have enough solids to keep the porous plastic looking deep black just like it looks after initial application. The plastic will return to its faded look after a few weeks with this spray coating from Adam’s. Please use a true glass bottle coating for plastics and not this spray coating.

@UncleFjester Месяц назад

What Liquid has solids? Plastic isn't porous. Did you skip vocabulary in 4th grade? Where did you take physics in college?

@stephenlouden480 Месяц назад

I love this stuff, but it is quite tacky and streaky if you wait more than a minute before wipeoff . My best results come by applying it and removing it 1 panel at a time and quickly leveling it. it tends to soak in the towel so keep flipping towel and using new ones but I love the easy spray form though it's not as concentrated it lasts a while in the bottle and can use it a few months later unlike real coating you have to use up within a few weeks before it cures. .I have Adam's Advanced spray on s few cars and it's been 1 year still beading and protecting so I'll continue using it. Hyeon Cancoat Evo is another great option. I think our mfgs need to make a 1 to 2 yr spray ceramic or graphene that's easier than glass bottle coatings.

@vwbora26 5 дней назад

May I suggest not wearing jeans when detailing a car, those rivets, zipper, button , belt buckle etc can scratch your paint.

@donttalkwalk Месяц назад

Very good explanation. However, I’m not impressed with. Taking a nice looking car and making it shiny is easy . Take a old car that needs some work and make that look awesome. Then I’ll see how good your products are.

@PickupsAreNotTrucks 25 дней назад

It’s not really about making it shiny and good looking, it’s about protecting the paint from UV and road debris. Also ease of cleaning. If you did an older beat up car, it’ll just protect what’s there, it’s not going to make it look better.