This is my third RC video! This was my second scratch built plane that I have built. My goal for this next build was to make something that I could fly in my yard, which I accomplished. This build project lasted only about half a week between the build and the flights but I am happy to share my experience with everyone else! Information about my plane specs as well as electronics and components that I used will be listed below as well as RaptorTech's video and article on The Fish where you can find more information. If you have any questions, feel free to ask below in the comments!
🞇Information: This plane was made to be a rudder and elevator controlled plane, beginner friendly. I printed the plans out from RaptorTech's FliteTest article and cut them out onto 20in x 30in Adam's Readi board from the dollar store. This build took a little less that two sheets of foamboard and weighed about 360g before I added the battery, which brought the weight to a little under 400g which worked amazingly for how much surface area the wings have. I added my own 3D printed powerpod motor mount onto the foam and 3D printed servo mounts so that I don't have to get glue residue on the servos if I were to reuse them. Thanks for watching this video, and I hope to see you guys around in upcoming videos, lots of exciting stuff planned for future videos!
🞇Parts that I used in this build:
- Two 9g Servos (sg90)
- 450mAh 3s Tattu Battery (45C) (About 30 grams)
- Standard 30A ESC (Comes with motor underneath)
- Standard Amazon 2212 1000kv Motor
- 8038 Gemfan propeller (you could probably use 9in or 8in too)
- Flysky i6x Transmitter and FS- ia10b Reciever
🞇Social Medias:
- RU-vid - ru-vid.com/show-UCNF7...
- Twitter- / snapperwamper
- Instagram - / wampersnapper
- Fiverr - www.fiverr.com/wampersnapper
🞇Check out my last video: • FliteTest Simple Scout...
🞇(Currently as of this video being uploaded at 314 subscribers!)
#RoadTo400
#WamperSnapper
#RCPlanes
🞇Flying The Fish for a second time: (No video yet)
-------------------------------------------------------------------------------------------------------------------------
🞇RaptorTech's FliteTest Article, RU-vid video, and Plans for The Fish:
- Article: www.flitetest.com/articles/th...
-Video: • The Fish: A Scratch Bu...
-Plans: www.dropbox.com/sh/r1xu16glgo...
-------------------------------------------------------------------------------------------------------------------------
🞇Link to my first plane on Amazon: www.amazon.com/HobbyZone-Airp...
🞇Link to my second plane on Amazon (PNP): www.amazon.com/VOLANTEXRC-Air...
-------------------------------------------------------------------------------------------------------------------------
Chapters:
0:00 Intro
0:20 Cutting out plans
0:33 Cutting out foam pieces
1:10 Assembling parts
1:43 Removable Wing (Velcro)
1:52 Powerpod: Motor and Propeller setup
2:20 Centering Servos
2:40 Testing Electronics
3:06 3s 450mAh Lipo
3:11 Maiden - Flight #1
4:18 Flight #2
5:54 Flight #3
7:45 Awesome Slow Landing
8:00 Outro
8 июл 2024