The Gundam Model Kit to End All Model Kits - PG Unicorn Gundam Perfectibility | 4K BUILD AND REVIEW 

Yeah, but then you’ll need to do spray painting

Even then, I believe there are different parts for the Phenex shields on the back to be correct

Very wild 😅😅😅

@rockblockstudio meh its close enough

Just buy the gundam base exclusive

Armed Armor BS (Bullshit)

It's actually the other way around. The older camera was locked at 60 fps which caused the flicker. The lights of the psychoframe and the lights of the eyes flicker at a different frequency to each other and the only frame rate that they both don't flicker at is 40fps, which a lot of this video had to be filmed in. Anything higher and they tend to go nuts, which sucks as I usually like to film at 100 for smoothness and then cut it back to 50 or 60 in post. HOWEVER, you are right because I wouldn't have know that before or had a camera I could adjust before. And any or all improvements are a direct result from comments like this one, as the best info on here is ALWAYS in the comment section 😄

@@MechaGaikotsu your lighting and videography game is on another level compared to two years ago.

IK

The only reason why i want to buy this kit is because i know it will take me a lot of time to build this one. Cause i know that once I'm done building this one I'll want to buy another one and i can't have that.

Can confirm that both of these have worked for me on multiple occasions.

batteries on mine before made it a bit wonky and also had to plug it in better. i feel like that plug down there is getting wrenched a bit out sometimes when youre really handeling that thing. it likes to wiggle out im thinking. there is no clip to hold it in. with all connectors some just need a good reseat. i almost had a dam scare with the eyes before

@@keesoudwater111 Mmmm i'm not too sure about that because for me it connects super well, I think you need to match the plug with the port properly because there is a groove where it sits snug and tight

Yeah, this was what I've had to do a few times. That being said even though I've only bought and built it once, I have an issue in terms of the MGEX considering the price point lol. The LED's really should've been RGB, especially if they aren't going to make any PB variants(I know they've said they had no plans to, but I know that's just BS, anyone that has been building gunpla for the past 10 years will know that a PB MGEX unicorn is just an event away.)

@@smcsenko6714 you can still wiggle it out a bit

With RGB lights too

And the back pack wing kind of also need some light to complete the perfectibility. Come on bandai

Kosmos leds are too bright...

Where can I get one for this specific kit?

@@LotiMcfloti Google it bro

Same built all 3 of the different pg unicorn and I never had his issues

@@PoiNickels Holy crap you must have a massive wallet

Gaikotsu isn’t known for the quality of his builds. Probably had some kind of mess up to cause the transformation issues.

I've got a copy too. Pulling on the legs was a hassle until I figured out where to grab from, but the chest ended up being my biggest problem. One side just refused to budge open. Me and my folks managed to wiggle it out, but I'm still worried that if I ever push it back in, I'll never get it out again. And it was only one side; the other side moved alright.

he tends to be heavyhanded with his kits, which is also why he encounters "early real grade syndrome" which isn't a thing

I have this kit and I loved it a lot

I pretty sure it’s HBJ I think hold on let me googled this

Yeah you got it right it is HJ which I always thought it was HBJ but hey you learn something new every day

Shhhhhhh

Very lucky! And thanks for the kind words

Time stamp ?

PG Exia is good, it's just Exia by nature itself is very simple, it doesn't have transformation like Unicorn, Zeta, big backpacks like Perfect Strike, fancy wings like SFreedom or innerframe like Gp-01. It's also kind of small so it has less shelf presence than the other PGs.

@@anhson9850 true, I guess the selling point was the LEDs, which imo are still maybe the best they’ve done on a kit? MGEX Unicorn is close but PG Exia has multiple colours/modes, cycling in the GN drive, fading in and out, etc.

@@misbehaven1237 Yes, it has the best LED unit to date.

Thumbs up for your thumbs up!

I think we've had several partial face reveals before, but this is the first full face that I remember seeing in several years that I've been watching this channel

@@vanerek i think this is the first time some sights of face can be actually recognizable .

@@IniOny they showed their face back when they were doing vlogs prepping to move back from Japan

You could say your timing was.. perfectibility

You’d need a loan to get one of those, lmao.

@@johnathonlee7053 Welp time to take out a second mortgage, just imagine if a fine watch maker gut commission to make a full metal build gundam

Defo gonna destroy the wallet and bank. (Heh, get it?)

Right!? The next HG I build is going to feel a lego mini fig

@@MechaGaikotsu lol

You might be, but now I know there's at least one of you"

Question, I’ve always wanted to get into Gunpla and this is the only set that’s really caught my eye. But since I’m new I don’t know if I’ll be able to build it. Is it really difficult or will I be able to manage?

@@fraze6944 uh it's not impossible if you take your time but I would really advice you to work your way up by doing some high grades a and a master grade. Just to get a feel for it.

@@fraze6944 if its your first, I would say that it'll be a struggle, especially if your going for the full lighting build, as the wires can be fiddley as heck. I wouldn't say its impossible though, just time consuming. Me being a total muppet dove in the deep end and tried a PG unicorn as like my second or third proper build, it took a few days and patience but got it built. I would recommend doing a Master grade and a real grade (which this version of unicorn does have (although quiet pricey)) as they will set you up nicely with an understanding of what different symbols mean as the PG unicorns manuals don't normally get updated like the newest ones have been. Couple kits to consider as easy builders would be a RG unicorn and the MG ver ka wing zero custom due to ease and learning. I think the symbols in the instructions are explained in newer HG kits like the helios gundam However back to your question, it isn't impossible, just make sure to take your time, have patience, use good tools and deffo watch some of the gundam tubers best tips etc as they will help. Happy building!

Uses a lot of the same parts, but trust me, there's a difference

Oh hell nah 💀

Always

Never knew about the Kosmos ones. I had the LEDs already for my unbuilt Phenex so I jsut stole them for this build. Might actually look into thos kosmos ones for the Phenex now

I thought I was sick of seeing the unicorn gundam. This quite literally reignited my love for the design

one can only dream...