The Husqvarna mower runs but the Self-Propelled doesn't work. 

Solid assist. Saved me a ton of time and money. I would have never looked at the cable. Thank you

Yes, that was a quick and easy fix because of you. Thank you, keep it up!!

you were right my lawn mower needed the same adjustment, thank you so much for sharing

It's always the smallest thing you never look at... Two simple twists of that adjustment piece and this thing just tried to yank my arms from my shoulder sockets. I exaggerate, but that's what it feels like after only having 1 wheel working for the last 2 years 😅

Thanks much for the detailed info 👍

Exactly the video I needed.

Thank you for saving me both time and money.

great info , thx for sharing sir

Great job. The owner should have you do a tune up on it so it is ready to go for another 5 years. Thanks for the video.

Thanks! Awesome advice!

Great video. Thanks.

Lightweight is good and what did I use it for it’s a lawnmower ru-vid.comUgkxTPN04aT-Qdjr_KS3ql7ng8wnU3wwsCqk also recommend Yes it is lightweight so hence not as robust as our old one. But if you take care it does the job really well.

Thanks for the video.

Any idea why the same mower would clunk when put into gear?

I have one of these and I've had lots of trouble with the front transmissions. I have replaced two. I was wondering, is there some way to buy a smaller belt and just make it a rear we will drive?

What if you don’t have one of those adjustment things. I have one closer to the top of the mower and its encased in a piece of hard plastic and i can’t get to it. What I do then????

Hiya, Hoping you might be able to help me with my mower. There's a spring that came off and I'm not sure where Or how it goes back. The reason I was messing around down there was that my mower wasn't shutting off, so Noticed that the cable near the propeller level at the handlebar wasn't going into it sleeve and the machine was not turning off because of that. I had to force the cable back down to shut it off. When i turned it over, i saw there was a bunch of lawn material in the way, so I started scraping it out and then the spring popped off in the rop right corner. Sorry I can't give you more accurate part definitions, This is new to me. Thanks :)

How to change oil

After replacing the belt,it still didn't work. I tried this. BINGO

Good job, however would have liked that you raised the front, then the rear wheels to show that the are turning on their own.

I have one of the same mowers, I'm guessing mine gets hot after fifteen minutes.Then shuts off and won't start until it cools off. What do you think the fix may be?

Where in east texas are you?

Also the rear Tran goes bad first and only front is pulling, at the price of rear assembly just leave it unless you got a couple of hundred bucks extra

People don't worry about the oil, filter until something else goes wrong with them most the time . Investments need maintenanced too .

I adjusted mine but its not working

Most have the second belt pulley guard missing from factory and they will not warranty it New guard 50 bucks

When I wheeled my mower out from winter storage and took off its cover, I accidently broke off the left handle of the drive housing. So, I think I only need the only need to replace the drive handlebar or whole cable casing on the mower handle of my HU275E mower. All I need to know is the sequence to returning the main cable back into its housing...as far as I can tell, the rest of my mower is working. The electric start button works just fine, started right up, except w/that handle broken the rear left wheel won't turn. Can you help me?

There's another problem with these mowers, he did the right thing checking the simple first, but those plastic wheels have these gear like plastic things that runs with the metal gear. These plastic ones will break and you'll be stuck again....YOu remove the wheel and inside the wheel is a hub that drives it, look for broken teeth on the gears. The wheel assembly is almost 50 bucks too

What if you don't have an adjustment on your cable?

Can that adjustment loosen by itself from the vibration??

Need to zoom in on drive cable attachment; too much shade on the area of interest

Great video. Btw….it sounds like it’s hot where you live. I think I heard cicadas??

"It ain't got no gas, mm-hmm."

I hate this lawnmower. It is designed specifically to throw grass up in the pulleys and belt

Not a fan of these AWD mowers. just more things to fail.

It's always the smallest thing you never look at... Two simple twists of that adjustment piece and this thing just tried to yank my arms from my shoulder sockets. I exaggerate, but that's what it feels like after only having 1 wheel working for the last 2 years 😅